Steamfast SF-420 User manual

MODEL SF-420
Fabric Steamer
by Top Innovations, Inc.
Please read all instructions before use.
Mail in your warranty registration card.

LETTER FROM THE CEO
Dear Valued Customer,
Congratulations on purchasing your new SF-420 Fabric Steamer. This powerful
product is designed to effectively smooth wrinkles and reduce odors with a
minimum of time and effort.
Turn your Fabric Steamer on, and in less than a minute you are ready to delicately
remove wrinkles from garments, draperies and upholstery. With 1500 Watts of
power and a 54 oz. (1600 ml) maximum water capacity, this Fabric Steamer is
capable of handling everything from big steaming jobs to quick touch-ups. With
the convenient Clothes Hanger Hook, you can hang garments right on the unit for
steaming. In fact, the Fabric Steamer is so versatile that it can effectively steam
drapes while they are still hanging, eliminating the hassle of taking them down!
This wrinkle-removing power, combined with its ability to reduce smoke, pet and
other unpleasant odors, means that the Fabric Steamer will let you care for your
precious fabrics and garments the way you’ve always wanted to.
Top Innovations, Inc. would like to invite you to visit our Customer Support Web
site at:
www.steamfast.com
On this Web site you will find additional information about many other exciting
products that are available, helpful tips on ways in which you can utilize your
Fabric Steamer, and other useful information to assist you in maximizing the
power of steam!
Enjoy your new SF-420 Fabric Steamer!
Benny Lee
Chairman and CEO
Top Innovations, Inc.
2Top Innovations, Inc.

3
Top Innovations, Inc.
WARNING: To reduce the risk of fire, electrical shock, or injury,
the following basic safety precautions should always be followed
when using an electrical appliance.
READ ALL INSTRUCTIONS BEFORE USING YOUR STEAMER
1. DO NOT leave your SF-420 Fabric Steamer unattended when plugged in or not
in use.
2. This unit is not a toy. Close supervision is required when using unit
near children, pets and plants. Steam produced by unit is hot and
pressurized. Care must be taken to avoid burns or other injuries. Never
point nozzle at people or pets.
3. Always unplug power cord when unit is not in use. DO NOT use this unit if
power cord or outlet is damaged. DO NOT use unit if it is not working properly
or has been dropped, damaged, or left outdoors. If such damage occurs, contact
our Customer Service Department (see page 13 of this manual) for service and
repair assistance.
4. This unit is an electrical appliance. DO NOT submerge it in water. DO NOT
use Steam Hose or power cord as a handle. DO NOT allow cord or Steam Hose
to be crimped by closing them in doors. DO NOT pull or stretch cord or Steam
Hose around sharp corners or edges. Be sure to keep power cord away from all
heated surfaces.
5. DO NOT use this unit with extension cords or electrical outlets that have
inadequate current capacity. A three-prong outlet or a properly grounded adapter
is necessary when using SF-420 Fabric Steamer.
6. In order to unplug SF-420 Fabric Steamer, grasp plug and pull smoothly and
firmly from outlet. DO NOT attempt to unplug unit by pulling or tugging on
power cord.
7. Use caution when operating unit as burns can occur from touching hot metal
parts, or from proximity to hot water or steam.
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS!
FOR HOUSEHOLD USE ONLY

4Top Innovations, Inc.
WARNING: To reduce the risk of electrical shock, this appliance
has a three-pronged plug. This plug will fit in a polarized wall
outlet only one way. If the plug does not fit fully in the outlet,
contact a licensed electrician to install a proper outlet. DO NOT
attempt to modify the plug or defeat this safety feature.
8. DO NOT handle or use this unit while hands are wet or when not wearing shoes.
To avoid falls and other injuries, be sure to dry any wet areas on floors and to
stand away from damp surfaces while using steamer.
9. SF-420 Fabric Steamer is only meant to be used with recommended SF-420
accessories. Other types of attachments are not to be used with this unit.
Doing so may cause injuries or damage to unit.
10. Nozzles and attachments become hot during use. To avoid injuries, DO NOT
touch nozzle while using this appliance. DO NOT attempt to change
attachments while unit is emitting steam.
11. DO NOT turn unit on its side when in use.
12. When filling your Fabric Steamer with water, DO NOT fill Water Tank with
more than 54 oz. (1600 ml) of water.
13. Before filling unit with water, always take the following steps:
(1) Turn appliance off
(2) Unplug power cord
Failure to follow these steps may result in electrical shock and injury.
14. Only water should be used in unit. Other cleaning agents will damage unit and
can cause injuries.
15. DO NOT operate unit if steam opening is blocked. Should this occur, shut unit
off and unplug.
16. Store your SF-420 Fabric Steamer in a cool, dry place. Allow unit to cool
completely, and always drain Water Tank and water reservoir before storing.
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS!
FOR HOUSEHOLD USE ONLY

FABRIC STEAMER PRODUCT INFORMATION
5
Top Innovations, Inc.
The following features and accessories are included with your Fabric Steamer. Carefully
inspect packaging material as some parts are shipped inside Styrofoam packaging. To obtain
possible missing parts, refer to the Customer Support section on page 13 of this manual.
UNIT FEATURES AND
ACCESSORIES
1. Pole Top
1a. Clothes Hanger
Hook
1b. Steam Nozzle
Holder
2. Steam Nozzle
3. Steam Button
4. Handle
5. Telescopic Pole
6. Pole Base
7. Steam Hose
8. Water Tank
9. Valve Cap
10. Lighted On/Off
Switch
11. Drain Plug
12. Lint Remover
13. Fabric Brush
14. Press Pad

FABRIC STEAMER PRODUCT INFORMATION
6Top Innovations, Inc.
-The Pole Top (1) is comprised of the Clothes Hanger Hook (1a) and Steam Nozzle
Holder (1b). The Clothes Hanger Hook allows you to steam garments that are
hanging from a clean, rust-free hanger. The Steam Nozzle Holder provides a safe
and convenient place to hang the Steam Nozzle.
-The Steam Nozzle (2) emits hot, penetrating steam.
-The Steam Button (3) is pressed to release steam from the Steam Nozzle. Steam
will be emitted as long as the Steam Button is held down. Note that it may take
several seconds for the unit to begin emitting steam after the Steam Button is
pressed, particularly when the unit is first turned on.
-The Handle (4) is ergonomically designed for comfort and ease of use, while
remaining relatively cool and safe during the steaming process.
-The Telescopic Pole (5) connects the Pole Top to the steamer, and can be extended
and retracted for convenient use and quick storage.
-The Pole Base (6) is the point at which the Telescopic Pole connects to the main
unit, ensuring a stable mount for the Telescopic Pole.
-The Steam Hose (7) directs steam from the boiler to the Steam Nozzle, and is
designed to be flexible while safely containing the steam. The Steam Hose
becomes more flexible as steam moves through it and it begins to heat up.
-The Water Tank (8) holds water to be used in the water reservoir, and is
removable for easy filling and emptying.
-The Valve Cap (9) controls the flow of water between the Water Tank and water
reservoir, and must be removed in order to fill and empty the Water Tank.
-The Lighted On/Off Switch (10) activates and deactivates the unit, as well as
provides a clear visual indication that the unit is powered on.
-The Drain Plug (11) allows you to easily empty water out of the water reservoir.
Simply unscrew the Drain Plug in a counter-clockwise direction, remove it, and
allow water to drain from the water reservoir.
-The Lint Remover (12) attachment connects to the Steam Nozzle and is designed to
assist in removing lint, loose threads and other small particles from fabric.
-The Fabric Brush (13) attachment connects to the Steam Nozzle and is designed to
assist in smoothing out exceptionally stubborn wrinkles.
-The Press Pad (14) fits on your hand, allowing you to support the fabric for a
more thorough steaming. The Press Pad also protects your hand from being
burned by hot steam.

ASSEMBLING THE FABRIC STEAMER
7
Top Innovations, Inc.
FIGURE 3
ATTACHING THE TELESCOPIC POLE
1. Attach Pole Top by sliding it onto top of Telescopic Pole as shown (FIGURE 1).
Note that Pole Top must align correctly in two grooves that run the length of pole.
2. Line up grooves of Telescopic Pole with two tabs inside Pole Base hole, and
insert bottom section of Pole into Base (FIGURE 2).
3. Tighten knob by turning it in a clockwise direction until it is tight, and Telescopic
Pole sits firmly in place in the Pole Base (FIGURE 3).
FIGURE 1 FIGURE 2
EXTENDING TELESCOPIC POLE
1. Locate bottom extension lock, and swing
hinge outward as shown (FIGURE 4).
Extend middle section of Telescopic Pole as
far upward as it will go, then close hinge to
relock bottom extension lock.
2. Repeat Step 1 for remaining two extension
locks, until Telescopic Pole is extended to
it’s full height.
NOTE: It is recommended to extend
Telescopic Pole to it’s full height during
steamer operation. This ensures full
extension of Steam Hose for maximum flow
of steam.
FIGURE 4

ASSEMBLING THE FABRIC STEAMER
8Top Innovations, Inc.
CAUTION: To prevent steam from causing bodily injury or damage to
surfaces, always hang the Steam Nozzle on the Steam Nozzle Holder when not
in use.
Do not lay the Steam Hose on the floor as condensation may occur, causing
unwanted water droplets in the steam.
Do not pull on the Steam Hose with excessive force as this may damage it,
resulting in a steam leak.
Your new SF-420 Fabric Steamer is now fully assembled and ready for use. Please
continue reading this manual for instructions on using the Fabric Steamer, directions
for cleaning and storage, and troubleshooting tips.
ATTACHING LINT REMOVER
AND FABRIC BRUSH
1. Make sure Lighted On/Off Switch is set
to “Off” position, and that unit is not
emitting any steam. Do not try to
connect Lint Remover or Fabric Brush
while unit is emitting steam, as this can
cause burns and injury.
2. Align two pegs on back of Lint Remover
or Fabric Brush with corresponding
holes on face of Steam Nozzle. Use
care to properly align attachment as
shown (FIGURE 5), so as not to cover
up steam holes on nozzle face.
3. Press Lint Remover or Fabric Brush
firmly onto Steam Nozzle, until it fits
securely in place.
FIGURE 5

USING THE FABRIC STEAMER
9
Top Innovations, Inc.
FILLING WATER TANK AND WATER RESERVOIR
IMPORTANT: Always make sure that Lighted On/Off Switch is set to “Off”
position and unit is unplugged before attempting to fill Water Tank
1. Remove Water Tank from main unit.
2. Holding Water Tank upside-down, unscrew and remove Valve Cap by rotating it
in a counter-clockwise direction (FIGURE 6).
3. Fill Water Tank with water through Valve Cap hole. You may refer to guidelines
on front side of Water Tank to fill it with desired amount of water, depending on
desired steam time (15, 30, or 45 minutes), or on desired amount of water (500,
750, 1000 or 1250 ml). Note that maximum capacity of Water Tank is 54 oz.
(1600 ml, 52 minute steam time).
NOTE: To prolong life of unit, it is recommended that you use distilled or de-
mineralized water in Water Tank. Do not attempt to substitute another water
tank for the one designed for use with this unit.
4. Replace Valve Cap by rotating it in a clockwise direction.
5. Place Water Tank back onto main unit (FIGURE 7). The sound of water flowing
from Water Tank into water reservoir should be audible for a short period of
time.
IMPORTANT: Do not attempt to operate Fabric Steamer with an empty
Water Tank, as doing so could result in damage to the unit.
FIGURE 6 FIGURE 7

USING THE FABRIC STEAMER
10 Top Innovations, Inc.
OPERATING THE FABRIC STEAMER
1. Make sure that Water Tank is filled with water and placed correctly onto main
unit, and that desired attachment (Lint Remover or Fabric Brush) is securely
connected if you wish to use it (see procedure on page 8 of this manual for
correct connection of attachments).
2. Plug power cord into a convenient 3-prong electrical outlet (FIGURE 8).
3. Switch Lighted On/Off Switch to “On” position (FIGURE 9).
4. Press and hold Steam Button, using care to point Steam Nozzle away from people
and pets. When first using unit, it will take approximately 50-60 seconds to
begin emitting steam. However, once unit is heated, it will not take as long to
begin producing steam when Steam Button is pressed.
NOTE: It is common for unit to produce gurgling sounds and small amounts
of water during the first few minutes of steaming. This is a natural part of the
steaming process. Pointing Steam Nozzle towards the ground and shaking it
gently may help to remove excess water from the Steam Hose more quickly
5. Once steam flow is steady and excess water has been removed from Steam Hose,
you may proceed with your steaming tasks. Refer to Tips for Using the
Fabric Steamer guide on page 11 of this manual for more information about
steaming garments and other fabrics.
6. When you have completed your steaming tasks, immediately switch Lighted
On/Off Switch to “Off” position and unplug power cord from electrical outlet.
Refer to Proper Storage section on page 12 of this manual for information on
proper cleaning and storage of Fabric Steamer.
FIGURE 8 FIGURE 9

USING THE FABRIC STEAMER
11
Top Innovations, Inc.
TIPS FOR USING THE FABRIC STEAMER
STEAMING GARMENTS
1. Place garment on a clean, rust-free clothes hanger.
2. Place hanger (with garment) on Clothes Hanger
Hook (FIGURE 10).
CAUTION: Use care when handling garments on
the Clothes Hanger Hook. Pulling on the garment
with too much force may cause the unit to tip over.
3. Press and hold Steam Button while directing Steam
Nozzle towards bottom of garment. Steam will rise
along inside and outside of fabric, removing
wrinkles. Slowly slide Steam Nozzle vertically,
from bottom to top of garment (FIGURE 11).
NOTE: Do not allow kinks to form in hose at any
time during use.
4. Release Steam Button and smooth fabric with your
free hand.
5. Repeat steps 3 and 4 as necessary until fabric is
smooth and wrinkle free.
FIGURE 10
FIGURE 11
OTHER STEAMING TIPS
-Curtains and draperies may be steamed while still hanging.
- To remove wrinkles from towels, handkerchiefs and napkins, drape them over a
rod or towel rack and gently steam them.
-Heavier fabrics may require repeated steaming to effectively remove wrinkles.
-To remove exceptionally stubborn wrinkles steam both sides of fabric.
-For additional assistance in removing tough wrinkles, or to remove lint and other
particles, attach Fabric Brush or Lint Remover to Steam Nozzle (see Attaching
Lint Remover and Fabric Brush section on page 8 of this manual).
- Use Press Pad in order to steam difficult spots and edges and to create creases in
fabric. Slide your hand through the velcro strap on back of Press Pad to secure it
to your hand. This will protect your hand from the flow of hot steam. Then steam
fabric while pressing it firmly but gently against the Press Pad.

CARE AND STORAGE GUIDELINES
12 Top Innovations, Inc.
PROPER STORAGE
Preparing your Fabric Steamer for storage is quick and simple. When you have
finished your steaming tasks, follow the steps listed below.
1. Set On/Off Switch to “Off” position, and unplug power cord from electrical
outlet.
2. Allow unit to cool completely.
3. Remove Water Tank from unit and unscrew Valve Cap to drain remaining
water into sink or tub.
4. Remove Drain Plug and drain any remaining water in water reservoir into a
sink or tub to prevent over-filling during your next use. Flush out water
reservoir with fresh water to minimize potential mineral build-up in water
reservoir. Replace empty Water Tank.
5. Unhook three extension locks on Telescopic Pole, and press down on Pole Top
to collapse Pole into compact storage position. Re-lock extension locks.
6. Store Fabric Steamer in a cool, dry place.
REMOVING MINERAL BUILD-UP
A common problem with steam appliances is mineral build-up caused by high
mineral content in many municipal water supplies.
The best way to avoid this is to use de-mineralized or distilled water in unit.
If you are unable to use de-mineralized or distilled water, we recommend you
use this procedure monthly to help avoid mineral build-up:
1. Unplug power cord from electrical outlet and allow unit to completely cool.
2. Remove Water Tank from unit and drain it into sink or tub.
3. Remove Drain Plug and drain water from water reservoir into sink or tub.
4. Using measuring cup (not included), make a mixture of 8oz. (236 ml) vinegar
and 8oz. (236 ml) water.
5. Slowly pour water-vinegar solution into water reservoir.
6. Allow to stand for 40 minutes.
7. Drain water-vinegar solution from water reservoir.
8. Rinse water reservoir with fresh water, drain and repeat until vinegar odor
dissipates.
9. Replace empty Water Tank.

TROUBLESHOOTING & CUSTOMER SUPPORT
13
Top Innovations, Inc.
PROBLEM POSSIBLE CAUSE SOLUTION
Unit fails to steam. Lighted
On/Off Switch does not
illuminate.
Unit is not plugged in. Plug into electrical
outlet.
Household Circuit Breaker /
Ground Fault Interrupter has
tripped or blown a fuse.
Reset Circuit Breaker /
Ground Fault Interrupter, or
replace fuse. If you need
assistance, contact a licensed
electrician.
Unit fails to steam. Lighted
On/Off Switch does
illuminate.
Water Tank is empty. Refill Water Tank using
procedures on page 9 of this
manual.
Steam output is weak or
intermittent.
Mineral build-up in unit. Follow Removing Mineral
Build-Up procedure on page
12 of this manual.
Excessive gurgling in Steam
Hose and Steam Nozzle /
water drips from Steam
Nozzle.
Condensation in Steam Hose. Some gurgling is a natural
effect of steaming process.
For excessive gurgling or
dripping water, point Steam
Nozzle towards ground and
shake to remove excess water
droplets.
Mineral build-up in unit. Follow Removing Mineral
Build-Up procedure on page
12 of this manual.
CUSTOMER SUPPORT
For problems with your Fabric Steamer, please refer to the troubleshooting
solutions located above. Additional inquiries should be directed to our Customer
Support services through our Web site, www.steamfast.com, on the Service Request
Web page.
If you do not have internet access, you may also contact our Customer Support
department by telephone, at [phone] or [phone].
NOTE: In order for our customer service representatives to help you as
quickly and efficiently as possible, please have the following information ready
before calling:
- Purchase information (where and when you purchased this product)
- Product Serial Number

14 Top Innovations, Inc.

WARRANTY INFORMATION
15
Top Innovations, Inc.
ONE YEAR LIMITED WARRANTY
(If outside USA, additional shipping charges may apply)
Top Innovations, Inc. warrants this product to be free from defects in material and
workmanship for a period of one (1) year from the date of purchase. This warranty
does not cover damage caused by misuse, negligence, use by improper current or
voltage, commercial use, use contrary to operating instructions or disassembly,
repair or alteration by any person other than Top Innovations, Inc. Warranty
Service Department.
Top Innovations, Inc. will repair or replace, at its option. This warranty gives you
specific legal rights and may have other rights, which may vary from state to state.
Performance of any obligation under this warranty may be obtained by:
1. Call [phone] for Return Authorization Number before returning for
repair. Failure to obtain a Return Authorization Number will cause a delay in
warranty and out-of-warranty service requests.
2. Include copy of purchase receipt.
3. Include your name, address, telephone number, and Return Authorization
Number on returned package.
Please send product postage-prepaid to:
TOP INNOVATIONS, INC.
WARRANTY SERVICE DEPARTMENT
6655 TROOST AVE.
KANSAS CITY, MO 64131
Should there be any missing or defective parts or accessories, please contact
Customer Support. In most cases, it is not necessary to return the entire unit. We
can ship most parts directly to your door.
Upon expiration of 1 year limited warranty, you will be advised of the cost of
repair before any servicing is done, unless you enclose a note indicating that you
would like us to proceed with repairs.
If you need to request warranty service, or have any questions about coverage
under this warranty, please visit the Warranty Service Request page on our Web site
www.steamfast.com. You may also contact the Warranty Service Department by
telephone at [phone] or [phone], or e-mail
[email protected].
Please have your product serial number ready before contacting
Warranty Service Department. The serial number is located on the
back or bottom of your unit.

Top Innovations, Inc.
6655 Troost Ave.
Kansas City, MO 64131
Tel: [phone]
[phone]
www.steamfast.com
[email protected]
V050422
Printed in China
PRODUCT SERIAL NUMBER
For your convenience, space has been provided below for
you to record the serial number of your unit (located on the
back or bottom of the unit) for easy reference when
contacting our Customer Service Department.
________________ - ______________________________