Steinberg UR12 User manual

EN
KO
IT
JA
ZH
PT
DE
FR
ES
RU
패키지 안내서
パッケージガイド
ⴎ逸䧗⶟
Package Guide
Guia do pacote
Packungsbeschreibung
Guide de l´emballage
Guía del paquete
Руководство по пакету
Guida della confezione
USB AUDIO INTERFACE / INTERFACE AUDIO-USB / INTERFAZ DE AUDIO USB
USB-АУДИОИНТЕРФЕЙС / USB ꮠ겐槡ꪫ / USB 탛쪻햠󼯴
USB オーディオインターフェース
UR12 PS Pack

PRECAUTIONS
2UR12 Podcast Starter Pack Package Guide
PRECAUTIONS
PLEASE READ CAREFULLY
BEFORE PROCEEDING
Please keep this manual in a safe place for
future reference.
WARNING
Always follow the basic precautions
listed below to avoid the possibility of
serious injury or even death from
electrical shock, short-circuiting,
damages, fire or other hazards. These
precautions include, but are not limited
to, the following:
If you notice any abnormality
• If any of the following problems occur,
disconnect the USB cable.
- Unusual smells or smoke are emitted.
- Some object, or water has been dropped
into the product.
- There is a sudden loss of sound during use
of the product.
- Cracks or other visible damage appear on
the product.
Then have the product inspected or repaired
by qualified Yamaha service personnel.
Do not open
• This product contains no user-serviceable
parts. Do not attempt to disassemble the
internal parts or modify them in any way.
Water warning
• Do not expose the product to rain, use it near
water or in damp or wet conditions, or place
on it any containers (such as vases, bottles or
glasses) containing liquids which might spill
into any openings.
• Never insert or remove a cable with wet
hands.
Fire warning
• Do not place any burning items or open
flames near the product, since they may
cause a fire.
CAUTION
Always follow the basic precautions
listed below to avoid the possibility of
physical injury to you or others. These
precautions include, but are not limited
to, the following:
Location and connection
• Do not place the product in an unstable
position or a location with excessive vibration,
where it might accidentally fall over and cause
injury.
• Keep this product out of reach of children.
This product is not suitable for use in
locations where children are likely to be
present.
• Do not place the product in a location where it
may come into contact with corrosive gases
or salt air. Doing so may result in malfunction.
• Before moving the product, remove all
connected cables.
• When using the product for a long time, make
sure that the knobs, sockets, adjusters, and
leg screws of the microphone stand are all
tight. If you use it when they are loose, the
microphone may fall or the microphone stand
may tip over, damaging the product. If these
parts become loose, retighten them.
Maintenance
• Remove the USB cable when cleaning the
product.
Handling caution
• Do not rest your weight on the product or
place heavy objects on it.
PA_en_12 1/1

PRECAUTIONS
UR12 Podcast Starter Pack Package Guide 3
NOTICE
To avoid the possibility of malfunction/
damage to the product, damage to data, or
damage to other property, follow the notices
below.
Handling and maintenance
• Do not use the product in the vicinity of a TV,
radio, or other electric products. Otherwise,
the product, TV, or radio may generate noise.
• Do not expose the product to excessive dust
or vibration, or extreme cold or heat, in order
to prevent the possibility of panel
disfiguration, unstable operation, or damage
to the internal components.
• Do not install in locations where temperature
changes are severe. Otherwise, condensation
may form on the inside or the surface of the
product, causing it to break.
• If there is reason to believe that condensation
might have occurred, leave the product for
several hours without turning on the power
until the condensation has completely dried
out, in order to prevent possible damage.
• Do not place vinyl, plastic or rubber objects
on the product, since this might cause
alteration or discoloration of the panel.
• When cleaning the product, use a dry and soft
cloth. Do not use paint thinners, solvents,
cleaning fluids, or chemical-impregnated
wiping cloths, since this might cause
alteration or discoloration.
Information
About copyright
• This manual is the exclusive copyright of
Yamaha Corporation.
About functions/data bundled
with the product
• XLR-type connectors are wired as follows
(IEC60268 standard): pin 1: ground, pin 2: hot
(+), and pin 3: cold (-).
About this manual
• The illustrations and screens as shown in this
manual are for instructional purposes only.
• The company names and product names in
this manual are the trademarks or registered
trademarks of their respective companies.
• Steinberg, Cubase and WaveLab are
registered trademarks of Steinberg Media
Technologies GmbH.
About disposal
• This product contains recyclable components.
When disposing of this product, please
contact the appropriate local authorities.
English

Package contents (check first after unpacking)
4UR12 Podcast Starter Pack Package Guide
Package contents (check first after unpacking)
Podcast setup overview
To get started with your podcast, make the following preparations:
1. Complete the setup of your console and computer referring to the UR12 Setup
Guide.
2. Complete the assembly and connection referring to this booklet.
3. Complete the setup of the UR12, microphone and peripherals referring to the
UR12 Operation Manual.
4. Set up WaveLab Cast.
Refer to the following page to download and activate the license.
https://new.steinberg.net/go/
Refer to the manuals for WaveLab Cast, UR12 and Cubase AI from the following URL.
https://steinberg.help/
UR12 main unit × 1 ST-M01
condenser microphone
× 1
Microphone stand
legs ×1
Microphone stand
shaft × 1
XLR cable × 1 USB cable × 1Microphone mount ×1 Pop screen × 1
UR12 Podcast
Starter Pack
Package Guide
(this book) × 1
UR12 Setup Guide × 1 Cubase AI
Download Information
× 1
WaveLab Cast
Download Information
× 1

Parts and their names
UR12 Podcast Starter Pack Package Guide 5
Parts and their names
The actual shape of the parts may differ from the illustrations above depending on the date of
production.
ST-M01
condenser microphone
Microphone
mount
Microphone
stand legs
Microphone
stand shaft
Pop screen
XLR connector
Clamp
Microphone
hold socket
Tilt adjustment knob
Height
adjustment
socket

How to assemble the product
6UR12 Podcast Starter Pack Package Guide
How to assemble the
product
Example of standard assembly
Assembling the
microphone stand
1. Turn the height adjustment socket
on the microphone stand legs to
loosen it.
2. Insert the shaft of the microphone
stand into the shaft hole of the
microphone stand legs from
below. Make sure that the flat
surface inside of the shaft hole
and the flat surface of the
microphone stand shaft overlap.
3. Slide the microphone stand shaft
to adjust it to the desired height*.
4. Turn the height adjustment socket
to secure it.
5. Attach the microphone mount to
the microphone stand shaft. Screw
in the microphone mount slowly
until the rotation stops.
6. Open the three microphone stand
legs and place the stand on a flat
surface.
CAUTION
Do not drop the microphone stand when
placing it on a desk or other high place.
Flat surface
Flat surface
*More than 1 in

How to assemble the product
UR12 Podcast Starter Pack Package Guide 7
NOTICE
To achieve optimum performance of the
product, do not ground the microphone stand
shaft. The correct condition is to support the
microphone stand with only three points on the
tripod.
Install the microphone
(ST-M01)
7. Make sure that the tilt adjustment
knob on the microphone mount is
tightened.
CAUTION
Make sure that the tilt adjustment knob is
tightened when installing the microphone. If
the tilt adjustment knob is loose, the
microphone stand may tip over.
8. While placing the ST-M01 on the
microphone mount, turn the
microphone hold socket to tighten
it, and secure the ST-M01 to the
microphone mount.
NOTE
The front of the microphone is the one with the
Steinberg logo.
9. Make sure that the assembled
stand does not wobble with the
microphone installed.

How to assemble the product
8UR12 Podcast Starter Pack Package Guide
Install the pop screen
10. Turn the clamp to loosen it.
11. Hold the microphone stand shaft
with the clamp in place.
12. Turn and tighten the clamp to
secure the pop screen.
13. Adjust the position of the pop
screen accordingly.
TIP
Leave a gap of about the width of your fist
between the microphone and the pop screen.
14. Make sure there is no wobbling
with the pop screen on. If it is
unstable, go back to step 12 and
adjust the position of the pop
screen.
4 in

Connection example
UR12 Podcast Starter Pack Package Guide 9
Connection example
NOTE
Apple accessories may be required when connecting the UR12 with iOS devices.
R
R
L
L
ST-M01
condenser microphone
When using the
condenser microphone,
turn the switch on after
connecting it.
(Turn the switch off
before disconnecting it.)
USB cable
UR12 main unit
XLR cable
iPhone/iPad
Front panel
Rear panel
Check!
USB adapter/
USB mobile battery
(For external power
supply)
Use
[5V DC]
jack
Use
[USB 2.0]
port
Computer Monitor speakers

䳻傢૾҆ಞ丩ଃδѣളεᣋ䍺ᴿ䲆ޢ
р⎭ᐸ䶏ᆿ᯦䰮䐥1818Ӈૂཝড়2ᾲ
ᇘᡭᵃࣗ✣㓵: 4000517700
ޢ㖇൶: https://www.yamaha.com.cn
স: 䳻傢૾⭫ᆆδ㤅ᐔεᴿ䲆ޢ
স൶: ⊕㤅ⴷ㤅ᐔᐸ㤅ᐔ᯦咵ኧ䐥18
Steinberg Website
https://www.steinberg.net/
Manual Development Group
© 2022 Yamaha Corporation
Published 01/2022
2022 ᒪ1ᴾ㺂
MWES-A0
VFK1680
〒430-8650 静岡県浜松市中区中沢町10-1