STEINDORFF S-1260 User manual

0
Digital LCD Biological Microscope
6-1260/6-1261
Instruction Manual
● Thanks for purchasing this digital LCD biological microscope. This user’s manual is for item
number 6-1260&6-1261. In order to operate the microscope properly and safely, and to
know all the features which will help prolong the microscope’s service life, please must read
this manual thoroughly before using the microscope. Please keep this manual in save place for
regular reference.
● We suggest that before snapping important images, please make a few trial snaps, making sure
you can operate the microscope properly.
● LCD screen was made by precision technology, 99.99% of its pixels are up to specifications.
0.01% of the pixels may have problems, or become black, red or green dots. It will not affect
the image’s video quality, and it is not a performance defect.
Exemption Declaration
● We tried our best to insure this manual’s content correct and complete, but do not guarantee
there is any mistake or omission. We reserve the rights to modify any of our products software
or hardware without further declarations.
● We are not responsible for any products defect caused by mishandling or by not using the original storage
FDUG
STEINDORFF®

1
Contents
Use Notices
1 Name of Components …………………………………………………………5
2 Installation …………………………………………………………………………6
2.1 Installing Illustration ………………………………………………………………6
2.2 Installing Steps ………………………………………………………………………7
3 Adjustment & Operation …………………………………………………………9
3.1 Adjustment System Installing Illustration ………………………………………… 9
3.2 Operation ………………………………………………………………………………10
3.3 Imaging Operation………………………………………………………………………13
4 Technical Specifications ……………………………………………………………25
5 Configuration Table …………………………………………………………………26
6 Trouble Shooting ……………………………………………………………………27
STEINDORFF®

2
Use Notices
Digital compound LCD biological microscope are high-tech products ,integrated in microscope, digital LCD
screen, high-resolution professional digital cameras and high-capacity memory card. Our LCD Microscope can
be used both traditional eyepieces and an 9inches HD LCD Screen for easy and comfortable viewing for yourself
and to share with others. This patented microscope thoroughly resolves dizziness and fatigue caused by using a
traditional microscope at work for a long time. It is not only features high resolution of LCD display to reverting
genuine photo and video, but also features for quick and easy snapshots or short videos. This unit integrates
magnification, digital enlarge, imaging, display, capture photo and video, sarchiving and printing for easy
exchange, store captured photos and clips on the optional SD card or transfer them to your personal computer
via included USB cable. All of which achieve a more convenient and effective breakthrough.
I. Safety note
1. Carefully open the box, avoid the accessories, like lens, dropping to ground and being damaged.
2. Do keep the instrument out of direct sunlight, high temperature or humidity, dusty and easy shaking
environment. Make sure the stage is smooth, horizontal and firm enough.
3. When moving the instrument, please use two hands to grip with the two sides of the microscope body.
4. If the bacterium solution or the water splash to the stage, objective or viewing tube, pull out the power
cord at once, and wipe up the microscope. Otherwise, the instrument will be damaged. When running,
the lamp house and nearby parts will be very hot. Please ensure there is enough cooling room for
them.
5. Make sure the instrument is earthed, to avoid lighting strike.
6. For safety, be sure the main switch is in “O” (off) state before replace the halogen lamp or the fuse,
then cut off the power, and do the operation after the lamp bulb and the lamp house completely cool.
7. Check the input voltage: be sure the input voltage which signed in the back of the microscope is
consistent with the power supply voltage, or it will bring a serious damage to the instrument.（Note;
Use the factory supplied power cord 12v for binocular LCD display please.）
8. The mechanical stage is distortion and damage ,when it places on overweight object
II. Maintenance
1. All the lenses have been well checked and adjusted. It is forbidden to disassemble them yourself.
2. The nosepiece and coarse/fine focus unit have a compact and precise frame, please don’t disassemble
them as possible as you can.
3. Keep the instrument clean, wipe dust regularly, and be attention to avoid contaminating the optical
elements especially.
4. The contaminations on the prism, as finger mark and oil, could be gently wiped with a piece of soft
cloth or tissue paper, gauze which has been immersed in pure alcohol or xylene. (note that the alcohol
and the xylene are all burned easily, do not let them near the fire, and use them in a drafty room as
STEINDORFF®

3
possible as you can.)
Use Notices
1. Don’t use organic solvent to wipe the non-optical elements, when you need to clean, use the soft detergent,
please.
2. When using, if the microscope is splash by liquid, cut off the power at once, and wipe up the moisture.
3. Place the instrument in a cool, dry position. After using the microscope, remember to cover it with dust
helmet. Do wait for the lamp house cooling completely before cover.
STEINDORFF®

STEINDORFF®

STEINDORFF®

STEINDORFF®

STEINDORFF®

STEINDORFF®

9
Adjustment&Operation
3.2 Operation
Picture 9
Picture 10
3.2.1 Adjusting the Illumination (picture No.7,8)
1. Connect the power, turn on the main switch to “-” (on).
2. Turning the brightness adjustment knob anti-clockwise, the
voltage raise, and the brightness strengthen; turning it clockwise,
the voltage decline, and the brightness weaken.
Using the lamp in a low voltage condition, will prolong the use life.
3.2.2Placing Specimen (picture No.9)
1. Place the slide on the mechanical stage. Use the stage clips to
clamp the slide gently.
2. Turn the portrait and lateral adjustment knob of the mechanical
ruler, move the specimen onto the required position.
3. When the objective lens is on highest magnification, the slide
thickness should be 0.17±0.01mm, otherwise it is not on good
imaging
Be careful when changing the objective. If you finish the
observation with the short working distance objective, and want to
change another one, be careful of not letting the objective touch
the specimen.
3.2.3Focusing (Picture No.10)
1. Use the 10×objective focus, to avoid the objective touch with the
specimen, you should raise the mechanical stage at first, let the
specimen close to the objective, then slowly separating them to
focus.
2. The operator can converse turn the coarse focus knob①to get the
specimen down ,and search images in the 10×ocular
simultaneously, then use the fine knob②to focus. At this
moment, you can replace other magnification objectives safely,
and focus without the risk of destroying the specimen.
If you need to fix the stage on a vertical position to make the
observation become more convenience, take use the of the locking
set.
Picture 7
Picture 8
STEINDORFF®

STEINDORFF®

STEINDORFF®

12
Adjustment&Operation
3.3 Operation for digital parts
3.3.1 Operation buttons and functions
1、Crosshair & Coordinate 6、Confirm Button
2、Color: White、Black、Red、Purple、Green 7、Snapshot & Video Playback View
3、Directionkey 8、Snapshot & Video Switch
4、Menu:Setting&Exit 9、Snapshot & Video
5、Display button：Only display image and remove kinds of characters, symbols
3.3.2 Power on
1 2 3 4 5 6 7 8 9
STEINDORFF®

STEINDORFF®

STEINDORFF®

STEINDORFF®

STEINDORFF®

STEINDORFF®

STEINDORFF®

STEINDORFF®