Stella PS00401 Seies User manual

STELLA
STELLA Series Installation Instructions
3.1. 2.
01
02
Cut the light board according to the position shown by the
dotted line on the light board according to the actual needs,
and combine it into a composite suitable shape.
Note: The minimum cropping unit is as shown in the figure
below:
Remove the 3M protective tape on the back of the light
board, and attach the light board to a suitable position
500mm
250mm
PS00401
PS00402
25
25
3M protectives
Installation Steps：
Series
Dimensions：

6.4. 5.
03
Use the attached wires to connect each independent light
board to supply power. Note that "+" connects with "+"
and "-" connects with "-"; it can be inserted into the
terminal or welded at the solder point
Note: When the product is used in a light box, it is recommended to adapt to
the light uniformity; in general, the distance between the soft film and the light
board should not be less than 40mm.
24V+
24V-
24V+ 24V+
24V-
24V-
24V+
24V-
24V+
24V-
24V+ 24V+
24V-
24V-
24V+
24V-
LED
R2
LED
R1
R2
R1
14
14
Note: Thumbtacks or code nails can also be
used for fastening at positions that need to
be strengthened. Please note: the maximum
size of the head of a thumbtack or a tack is
less than 11mm.
24V DC
Drive
220V AC
WARNING ！
The following safety precautions are intended to prevent any injury or damage to other things,
and may cause damage if the product violates precautions during use.
1、Installation and inspection of the product must be carried out by a professional with an electrician's certificate.
2、Please use DC24V power supply. Please insure right positive and negative connection
Do not use other power sources, such as AC220-240V.
3、All power cables should be with protection treatment. The power supply wiring should be insulated and
waterproof.
4、The product should not be covered thermal insulation material or inflammables, which may cause the
product to malfunction or catch fire.
5、The installation must be firm, without loosening, sagging, etc., and the product cannot be moved forcibly
after installation.
6、For safety, do not look directly at the LED light source.
7、Do not use as task illumination when in building construction.
8、LED module can't be changed.
9、Tunable white light strips should match the constant voltage and dimming driver to use
PRECAUTIONS
Precautions for storage：
1、storage temperature and humidity：0℃-55℃40-70%RH
2、Do not unwarp packaging during storage. Please place in the direction indicated by the carton. Do not stack
heavy objects on the packing box.
3、Please do not store the product under the following conditions：
-High humidity
-High temperature
-confetti and dust
-sunlight exposed
-Chemicals such as strong acids, strong bases, solvents, etc
Precautions for installation and use：
1、Install in strict accordance with the instructions.
2、temperature of product use: －10℃-＋40℃. Do not use under the following conditions:
-High temperature
-high humidity,
-dust,
-sun exposure,
strong acid and strong alkali solvents,
->2000 meters high altitude,
-high air pressure,
-electromagnetic influence,
-places that may cause vibration or fall
3、Random cutting, breakage, forcibly pull, twist, press and tag on the product is prohibited.
Maintenance
-To ensure the stable use of the product and prolong its service life, regular inspection
and cleaning is needed
-Cleaning and inspection at least every 3 months with power off
Inspection Method
-Whether driver and chips work well
-Whether there is unusual smell, sound or heat.
-Whether there are breakage, or looseness, etc. If an abnormality is found, please
immediately power off and stop using, and eliminate the abnormality in time.
Cleaning
-Gently wipe the product with a soft cloth