F.PROGRAMMING
The followinginstruction isintendedtoaid innavigatingthe abovemenustructure.Takesometimetoget
accustomedtothe functionsofthe menu buttonsandlayout.Thiswillensureproficiencywithoperatingthisunit.
Notethatsometerminologyusedmaynotbe immediatelyclear atfirst.i.e. GRAYrefers tothe dimmingmode.
Auto Mode
•Navigationofthemenuisaccomplished viatheMODE,SETUP,UPandDOWNbuttons. Followingthe flowchart
above,youcanset the unit instand-aloneAUTOmode.Navigatetothe LED menu,thenthen choosebetween e-auto
and e-manualmode.
•Inautomode,the unit will scroll throughvariouspreprogrammedsequences.The speed atwhich isperforms
thesesequencescanbeadjusted bynavigatingto thespeed selection.Whileinthismode,ifit isdesired tohavethe
lamps strobe, younavigate tothefreq selectionandadjustthestrobefrequency.The“0” settingis fullon,“20” setting
is the higheststrobe rate.
•Allof thiswilloccurwiththe light bars in theneutral,centerposition.
•NavigatebacktotheLEDscreen,then usingthe UporDOWN button,navigatetotheBARmenu.When youdo
thisthe lights will continue to sequence inthe mannerin whichtheywereundertheLEDprogramming screen.
•Atthispoint,youcaneithermanuallysetaservoposition ofthetwobars,orsetthe unit to automatically
sequence throughmultiplepositioningprograms. Bar positionsaresettable from0~180°,auto speed modesare
adjustablefrom01~16,16beingthe highestspeed.
ShowMode
•Thismodeallowstheusertoselectone oftenpreprogrammed light shows. Each showprovidesavarietyoflight
strobe and chasesequences,combinedwith independent servomovement.
•IfyouareintheAUTOmode,pressingtheMODEbuttononceshouldbringyou totheSHOWmode.Press the
SETUPbuttononce,the ShowPROGRAMnumber(1~10) will display.UsingtheUPandDOWN buttons,youcanscroll
throughthe ten programmedshows.
SoundMode
•Thismodecyclesthroughall ofthe preprogramedsequences,with sound triggeringthenextsequence.Sensitivity
is adjustable from001 to031,with031beingthe mostsensitive.
•Ifyouarein the AUTOmode,pressingtheMODEbutton twice shouldbringyou totheSOUNDmode.Press the
SETUPbuttononce,youwillseeanS,withanumberdisplayed (default0),thisisthe sensitivitysetting. UsingtheUP
and DOWN buttons,youcanscroll from0to31.
DMXMode
•Ifyouarein theAUTOmode,pressingthe MODEbuttonthreetimesshouldbringyouto the DMXmode.Inthis
mode,you cancontrolthe unit viaindustrystandardDMX-512 controllers,orallowthis unit to be controlledbyanother
lamp.
•Press theSETUPbutton once,youwill seeCHANNELand ADDRESSoptions.Addressselectsthe actualDMX
startingaddress, CHANNEL determines whetheryou areoperating theunit in 1/12/16channelmodes.
SettingsMode
•This is used toresetthe factorydefaultsettings, view firmwareversionandadjusttheleftandright servomotors.
