Step Technica CUB-43PCI-LP User manual

～ Read Me First ～
CUB-43PCI-LP Setup Guide
■ Please check the bundled items.
Make sure that there is an accessory attached with the product.
● Interface board (with Low prole bracket)・・・1 pc
＊Do not touch the terminal contacts with your hands. It may cause the malfunction.
Terminal contact ＊
CUB-43PCI-LP
■ How to download the device driver and CUeditor43J_PCI
URL：https://www.steptechnica.com/en/download/index.html
Download the device driver and CUeditor43J_PCI from StepTechnica website.

1
1. Driver installation
■ Driver can be manually installed from downloaded driver le.
The conguration of downloaded driver le is shown in the table below.
OS Driver installer storage location
Windows 7/ 8/ 8.1 64-bit version Driver_V3000\Win7_Win8.1\x64\dpinst_x64.exe
Windows 7/ 8/ 8.1 32-bit version Driver_V3000\Win7_Win8.1\x86\dpinst_x86.exe
Windows 10 64-bit version Driver_V3000\Win10\x64\dpinst_x64.exe
Windows 10 32-bit version Driver_V3000\Win10\x86\dpinst_x86.exe
Select the driver installer to execute according to your PC system environment.This
document describes how to install driver to 64-bit version of Windows 10.
①. Power-on PC, start Windows, and log on as an Administrator.
②. Execute "dpinst_x64" in "Driver_V3000 ＼ Win10 ＼ x64". Select 'Yes (Y)' in
the user account control dialog box.
③. Select 'Next (N)' in the driver installation dialog box.
④. Select 'Finish' in the next dialog box.

2
①. Power-o󱐯 the PC.
②. Remove the PC side panel.
（Refer to the PC manual for how to remove the side panel.)
③. The board is to be inserted to PCI
slot, so remove the cover of the slot
to insert.
(Refer to the PC manual for how to
remove the slot cover.)
④. Insert the board to PCI slot rmly.
(Change to the low-prole bracket
when the board is inserted to the PC
which has the low-prole slot.)
⑤. Fix the bracket using the screw
attached with the PC.
⑥. Close the PC side panel in the reverse order of step 2.
2. Hardware installation
■ For how to put-on or remove a PC side panel and insert a PCI card to the PC slot, refer to your PC manual.

3
3. Check that the PCI card is correctly installed
Open 'Device Manager' rst to check the card has been correctly installed.
For Windows 10
①. Press 'Windows' and 'X' key to display
'Device Manager(M)' and click it.
②. Device Manager is displayed.
Select and double-click 'CUB Devices'
to show the devices listed in the
context menu and check 'CUB-43PCI-
LP Device' is in the list.

4
For Windows 8 / 8.1
①. Press 'Windows' and 'X' key to display
'Device Manager(M)' and click it.
②. Device Manager is displayed.
Select and double-click 'CUB Devices'
to show the devices listed in the
context menu and check 'CUB-43PCI-
LP Device' is in the list.

5
For Windows 7
①. Open 'Device Manager' from the 'control panel'.
②. Device Manager is displayed.
Select and double-click 'CUB Devices' to show the devices listed in the
context menu and check 'CUB-43PCI-LP Device' is in the list.

6
5. How to install CUeditor43J_PCI editor software
■ Driver can be manually installed from downloaded CuEditor43J_PCI folder.
①. Execute 'CuEditor43J_PCI ＼ setup.exe' in 'Setup disk'.
②. Select 'Yes' in the user account control dialog box.
③. Select 'OK' in 'CUeditor43J_PCI setup' dialog box to continue.
④. Specify the install location of CUeditor43J_PCI.
Click 'Change Directory' to change the install location.
Click thick-squared button to start installation.

7
⑤. Click 'Continue' in 'CUeditor MKY43 PCI - Choose Program Group' dialog box
to continue.
⑥. Click 'OK' button when the setup dialog box is displayed to nish the driver
installation.

Safety Precautions
Manufactured by : StepTechnica Co., Ltd.
Issued : April 2019
Document No：STD_CUB43PCILPSU_V2.0E
Warnings / Cautions
Contact
Visit our website or e-mail to StepTechnica's engineer.
Website E-mail to engineer
https://www.steptechnica.com/en/contact/index.html O󱐰ce hour
9:00am to 5:30pm (Weekdays)
Product Specications
Item Description
CUnet device MKY43 × 1pc
CUnet communication method Half-duplex
CUnet communication rate 12M/6M/3Mbps (Set in MKY43 register)
CUnet communication connector RJ45 type (8pin modular) × 2pcs
Supported bus Based on PCI Ver2.2, 32-bit, 33MHz expansion bus, 5.0V/3.3V supported
Owned resource 16KB serial memory area（Automatically allocated by PnP）
Interrupt 1 line used（Automatically allocated by PnP)
Supported OS
Windows10
Windows8.1
Windows8
Windows7
（64bit/32bit）
（64bit/32bit）
（64bit/32bit）
（64bit/32bit）
Power supply DC +5.0V
Consumption current 500mA or lower
Operating conditions Temperature 0 to 50℃ Humidity 20 to 90%（With no condensation）
Storage conditions Temperature 0 to 80℃ Humidity 0 to 90%（With no condensation）
Size 119.9mm(W) × 64.4mm(H) ※ Not including a panel (Low Prole supported)
Accessory Low prole bracket
The information in this document is subject to change without prior notice.
Before using this product, please conrm that this is the latest version of this document. (Visit our website to check
the latest version.)
Technical information in this document, such as explanations and circuit examples, are just for
references to use this product in a proper way.
When actually using this product, always fully evaluate the entire system according to the design purpose based on
considerations of peripheral circuits and environment.
We assume no responsibility for any incompatibility between this product and your system.
We assume no responsibility whatsoever for any losses or damages arising from the use of the
information, products, and circuits in this document, or for infringement of patents and any other rights of a third
party.
When using this product and the information and circuits in this document, we do not guarantee the right to use any
property rights, intellectual property rights, and any other rights of a third party.
This product is not designed for use in critical applications, such as life support systems.
Contact us when considering such applications.
No part of this document may be copied or reproduced in any form or by any means without prior written permission
from StepTechnica Co., Ltd.