
Adjustment of the quick release
To adjust the quick release, open the lever and
tighten the screw until the desired result is achieved.
When the quick release is fastened the saddle should
not turn. Attention: The saddle tube has a mark
-max-. This indicates the maximum possible height
of the saddle.
Adjustment of the saddle
The saddle can be adjusted horizontally and vertically.
To adjust the saddle, loose the screws at the bottom
and adjust the angle. Fix the saddle at the desired
position and tighten the screws again very strong.
Take the rubber grommet and stick it into the hole.
Move the wooden tube downwards.
The rubber grommet keeps the tube in position.