Stirling SBC48B User manual

MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019
Issue Date: 10/2019IM Version No.: V1.1
MODEL NUMBER SBC48B
INSTRUCTION MANUAL
BEVERAGE CHILLER

2MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019
Congratulations on choosing to buy a STIRLING® product.
All products brought to you by STIRLING® are manufactured to the highest standards
of performance and safety and, as part of our philosophy of customer service and
satisfaction, are backed by our comprehensive 3 Year In Home Warranty. We hope you
will enjoy using your purchase for many years to come.
Welcome

3
MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019
Contents
2 Welcome
4 Warranty
5 General Safety Instructions
7 Product Overview
9 Getting Started
9 Installation
10 Instructions
11 Specications
12 FAQ’s and Troubleshooting
13 Other Useful Information
18 Repair and Refurbished Goods or Parts Notice
19 Warranty Returns

4MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019
The product is guaranteed to be free from defects in workmanship and parts for a period
of 36 months from the date of purchase. Defects that occur within this warranty period,
under normal use and care, will be repaired, replaced or refunded at our discretion. The
benets conferred by this warranty are in addition to all rights and remedies in respect of
the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
Beverage Chiller, 48L Capacity
Congratulations!
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
You have made an excellent choice of this quality product. Our commitment to quality also includes our service. Should you, contrary to
expectations, experience defects due to manufacturing faults, ALDI will provide you with a warranty against defects as follows:
Warranty
The product is guaranteed to be free from defects in workmanship and parts for a period of 36 months from the date of purchase. Defects that occur within this
warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion. The benefits conferred by this warranty are in addition to
all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
Proof of Purchase
This warranty is valid for the original purchase and is not transferable. Please keep your purchase docket, tax invoice or receipt as the best proof of purchase, and
as proof of date on which the purchase was made.
Extent of Warranty
This warranty is limited to defects in workmanship or parts. All defective products or parts will be repaired or replaced.
Normal Wear and Tear
This warranty does not cover normal wear and tear to the products or parts.
118 Campbell Street, Collingwood, VIC 3066
Exclusions
This warranty does not cover:
• Any defects caused by an accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorised modification, loss of parts,
tampering or attempted repair by a person not authorised by the distributor.
• Any product that has not been installed, operated or maintained in accordance with the manufacturer’s operating instructions provided with the product.
• Any product that has been used for purposes other than domestic use.
• Any damage caused by improper power input or improper cable connection.
To Make a Claim
This warranty against defects is provided by ALDI Stores, Locked Bag 56, St Marys Delivery Centre, NSW 2760, Phone [phone]. If a defect in the goods
appears within 36 months, you are entitled to claim a warranty, please contact or send all warranty claims to:
When making a return, please ensure the product is properly packaged so as to ensure that no damage occurs to the product during transit.
Please provide the original or a copy of the proof of purchase. Also please make sure you have included an explanation of the problem.
Please note that the costs of making a warranty claim, including any return postage, will be covered by the supplier identified above.
Please note upon receiving your warranty claim, the supplier will send, via the post or email, a repair and refurbished goods
or parts notice.
Please provide your email address and advise the supplier, if you wish to obtain a repair and refurbished goods or
parts notice via email.
AFTER SALES SUPPORT:
1300 11 4357
AUS
3
Hotline number: 1300 11 4357
Residentia Group Pty Ltd
Email: [email protected]
[email protected]
MODEL: SUC54EEW PRODUCT CODE: 62878 11/2018
IN HOME

5
MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read this manual thoroughly before rst use, even if you are familiar with this type of product. The safety
precautions enclosed herein reduce the risk of re, electric shock and injury when correctly adhered to. Make
sure you understand all instructions and warnings.
Keep the manual in a safe place for future reference, along with the completed warranty card and purchase
receipt. If you sell or transfer ownership of this product, pass on these instructions to the new owner.
Always follow basic safety precautions and accident prevention measures when using an electrical appliance,
including the following:
WARNING: This is a beverage chiller, this is NOT to be used to preserve or store fresh food or consumables.
A beverage chiller is designed for the storage of bottles at a set temperature that is particularly suitable for
beverage. The temperature maintained in this beverage chiller is too high for safe storage of perishable foods.
Electrical Safety
• Voltage: Before connecting and turning on the beverage chiller, ensure the electrical voltage and circuit
frequency correspond to that indicated on the appliance rating label.
• Earthing: This beverage chiller should be properly earthed for your safety. The power cord of this
beverage chiller is equipped with a three-prong plug for use in standard wall outlets to minimise the
possibility of electrical shock. Do not modify the cord and/or plug provided with the appliance. Improper
use of the earthed plug can result in the risk of electric shock.
• Connection: This beverage chiller requires a standard 220-240 V AC 50Hz electrical outlet. Do not
overload the electrical circuit.
• Power cord: Do not kink or damage the power cord; do not leave it exposed or dangling. Secure it at the
back of the appliance so no one steps on or places anything on the cord or against it. Keep the cord out of
reach of children. When moving the appliance, make sure not to damage the power cord.
• Auxiliary Items: Do not use an inverter, adaptor or extension cord with this beverage chiller. If the cord is
too short, have a qualied electrician install an outlet near the appliance. Use of an extension cord and an
inverter can negatively affect the performance of the unit.
• Protect from moisture: To protect against the risk of electric shock, do not immerse the unit, cord or
plug in water or spray it with any other liquid. Do not connect or disconnect the electric plug when your
hands are wet. Turn the power switch off before removing the plug from the socket.
• WARNING: Disconnect! To reduce the risk of re, electric shock or personal injury, always unplug the
appliance from the socket when not in use, when moving and before cleaning or servicing. Never unplug
the unit by pulling the power cord. Always grip the plug rmly and pull straight out from the power point.
• Electrical work: Any electrical work required for the installation of this appliance should be carried out by
a qualied electrician.
Usage Conditions and Restrictions
• Domestic use only: This beverage chiller is intended for indoor household use only. It is not intended for
commercial, industrial or outdoor use. It is not intended for use in a recreational vehicle.
• Purpose: Do not use this beverage chiller for anything other than its intended purpose. Other uses are not
recommended and may cause re, electric shock or personal injury.
• Attachments: The use of attachments is not recommended by the appliance manufacturer and
distributor as they may be hazardous.
• Improper use: Damage due to improper use, or repairs made by unqualied personnel will void
your warranty. We assume no liability for any eventual damages caused by misuse of the product or
noncompliance with these instructions.
General Safety Instructions

6MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019
General Safety Instructions Cont.
• WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other
than those recommended by the manufacturer.
• Usage restriction: This beverage chiller is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instructions concerning use of the appliance by a person responsible for their
safety.
• Children: Supervise young children to ensure they do not play with the appliance. Never allow children to
operate, play with or crawl inside the beverage chiller.
• WARNING: Do not use electrical appliances inside the beverage chiller, unless they are of the type
recommended by the manufacturer.
• Explosive or ammable substances: Do not store explosive substances such as aerosol cans with a
ammable propellant in this beverage chiller. Do not store or use petrol or any other ammable vapours
and liquids in the vicinity of this or any other appliance. Do not use such substances for cleaning the
beverage chiller. The fumes can create a re hazard or an explosion.
• Damage: Do not use the beverage chiller if the power cord, plug or the beverage chiller itself is damaged.
If the cord is damaged, contact the after sales support line and have the cord replaced by qualied
personnel in order to avoid a hazard.
• WARNING: Do not damage the refrigerant circuit.
• Do not modify: Do not attempt to alter or modify this beverage chiller in any way.
• Repair: Do not attempt to repair or replace any part of your beverage chiller unless it is specically
recommended in this manual. All other servicing should be referred to a qualied technician. Contact the
after sales support line for advice.
• WARNING: Keep ventilation openings, in the beverage chiller enclosure or in-built structure, clear of
obstruction.
This symbol alerts you to take care as this beverage chiller contains a ammable
refrigerant (isobutane) and insulation blowing gas (cyclopentane). Do not expose it to
high heat, sparks and open ames.
The refrigerant isobutane (R600a) is contained within the refrigerant circuit of
the appliance, a gas with a high level of environmental compatibility, which is
nevertheless ammable. During transportation and installation of the beverage
chiller, ensure that none of the components of the refrigerant circuit become
damaged.
Never use a beverage chiller with a damaged refrigerant circuit! If the coolant circuit becomes
damaged, avoid proximity to open res and all types of heat sources. The room in which the beverage chiller
is located should be ventilated for a few minutes.
It is hazardous for anyone other than an authorised service person to service this beverage chiller. In
Queensland, the authorised service person MUST hold a Gas Work Authorisation for hydrocarbon refrigerants
to carry out servicing or repairs which involve the removal of covers.
The room for installing the appliance must be at least 1m³ per 8g of refrigerant. The amount and type of
refrigerant in the appliance can be found in the technical specications on page 17 and on the appliance
rating plate.
CAUTION
RISK OF FIRE

7
MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019
Beverage chiller Layout
Front Rear
Product Overview
1
2
3
4
57
6
8
1. Reversible hinge
2. Glass door
3. Shelf
4. Adjustable foot
5. Thermostat
6. Power cord
7. Compressor
8. Evaporation tray
Key:

8MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019
Control Panel Layout
Located at the rear of the unit
See page 10 for instructions on setting the temperature
Product Overview Cont.

9
MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019
Getting Started
Unpacking
• Packaging materials: This beverage chiller has been packaged to protect it against transportation
damage. Remove all packaging materials from around and inside the beverage chiller and keep the
original packaging carton and materials in a safe place. It will help prevent any damage if the product
needs to be transported in the future, and you can use it to store the beverage chiller when it is not in use.
In the event the carton is to be disposed of, please recycle all packaging materials where possible.
• Suffocation: Plastic wrapping can be a suffocation hazard for babies and young children, so ensure all
packaging materials are out of their reach and disposed of safely.
• Power cord: Unwind the power cord to its full length and inspect it for damage. Do not use the beverage
chiller if it or its cord have been damaged or are not working properly. In case of damage, contact our after
sales support line for advice on examination, repair or return of the damaged product.
• Read the manual: Read this manual to familiarise yourself with the beverage chiller. Pay particular
attention to the safety instructions on the previous pages.
• Clean: To remove any dust from transit and storage, clean the interior and exterior surfaces of the
beverage chiller with lukewarm water and a soft cloth. Dry thoroughly.
Installation
• Two person installation: Use two or more suitably qualied people to move and install the beverage
chiller. Failure to do so can result in back or other injury.
• Freestanding design: This beverage chiller is designed to be freestanding only, and should not be
recessed or built-in.
• Floor surface: This beverage chiller must be properly positioned on a dry, sturdy, level surface that is
strong enough to support it when it is fully loaded.
• Transport: Do not tilt the fridge more than 45º when moving it.
Do NOT install/use the beverage chiller in the following locations/situations:
• In a garage or any other outside installation.
• In moist areas or areas of high humidity.
• In a recreational vehicle, or for use with an inverter.
• In direct sunlight, near heat sources, next to an open ame, cooking or heating appliance, or near any
other source of high heat.
• Direct sunlight may affect the acrylic coating and heat sources may increase the unit’s power
consumption. For best energy efciency install the beverage chiller in the coolest area of the room.
• In an area with extreme cold ambient temperatures.
• In an area with excessive moisture and high humidity. Make sure it is protected from elements such as
wind, rain, water spray or drips.
• In an area where petrol or other explosive and/or ammable liquids or fumes are used or stored. The
fumes can create a re hazard or explosion.
• Levelling: It is important for the beverage chiller to be level in order to work properly. To level the unit,
adjust the levelling legs at the bottom of the beverage chiller.
• Ventilation: To allow for proper air ventilation, leave a minimum 10cm of space between the back, and
5cm at the sides and top of the beverage chiller and make sure that the front of the unit is completely
unobstructed. Ensure that the ventilation openings are never blocked or covered. Never cover shelf with
aluminium foil or any other material, which may prevent air circulation.
• Door swing: The door on this appliance can be opened from either the left or the right side.
Should you wish to change the door swing direction, follow the instructions on pages 15–17.

10 MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019
Installation Cont.
• Suggested ambient temperatures: Choose a well ventilated area for the beverage chiller with
temperatures above 16°C and below 32°C. Ambient temperatures above or below this range may affect
the performance of the unit.
• Settling: Before connecting the beverage chiller to the power source, let it stand upright for approximately
8 hours. This will allow any refrigerant gasses that may have been disturbed during the transportation
process to settle and reduce the possibility of a malfunction in the cooling system from handling during
transport.
• Electrical connection: Plug the beverage chiller into a dedicated, properly installed wall outlet. Do
not under any circumstances cut or remove the third (earth) prong from the power cord. Any questions
concerning power and/or earthing should be directed toward a licensed electrician or our after sales
support centre.
• After plugging the beverage chiller in, turn the unit on and allow it to cool down for 1–2 hours before
placing beverages in the appliance.
Instructions
First use
• Powering on: Turn the thermostat knob control to the desired temperature to turn the appliance on.
• First cooling down: When you rst switch on the beverage chiller, the compressor will run continuously
until the beverage chiller reaches the set temperature. During this period of time, try not to open the door
frequently or place bottles inside the appliance. After about 1–2 hours, you can start loading the beverage
chiller.
• Odour: You may notice an odour when you rst switch on the beverage chiller. This is due to the parts
being new and is no cause for concern. The odour will subside as the beverage chiller starts to cool.
IMPORTANT
• When you use the beverage chiller for the rst time or restart it after it has been turned off for a long time,
there could be a few degrees variance between the temperature you select and the one indicated on the
thermostat. This is normal and it is due to the length of activation time. Once the beverage chiller has been
running for a few hours, everything will return back to normal.
• When loading several beverages at once, it will take longer for the appliance to cool the items than when
adding a single beverage at a time.
• If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting the beverage
chiller or reconnecting it to your mains supply.
Setting and adjusting the temperature:
You can set and adjust the temperature in the cabinet to anywhere within the cooling range (0° C – 10° C) by
turning the thermostat control knob to a desired setting. Fig. 1
• Setting 1: This is the lowest setting and correlates to the warmest temperature.
• Setting 5: This is the highest setting and correlates to the coldest temperature.
Fig. 1

11
MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019
Instructions Cont.
Access: To prevent damaging the door gasket, make sure the door is fully open when pulling shelf out
of the rail compartment. For easy access to the bottles stored, pull the shelf out approximately one third. The
shelf are designed with an emergency stop to prevent them being removed too far when loaded.
For efcient operation: Do not open the door unnecessarily. Only keep it open for as long as necessary
when removing or adding a bottle.
Specications
Product Dimenions (W, D, H): 430mm, 475mm, 510mm
Weight: 15.6kg
Temperature Range: 0–10ºC
Other Features: 1 x Black shelf
Mechanical controller
Adjustable feet
Black framed double glazed glass door
Specication and Technical Parameters
This product complies with AS/NZS 60335.1 and AS/NZS 60335.2.24 electrical safety, and with
EN 55014-1:2006+A1:2009 A2:2011 for electromagnetic compatibility.
Responsible Disposal
• At the end of its working life, do not throw this appliance out with your household rubbish. Electrical and
electronic products contain substances that can have a detrimental effect on the environment and human
health if disposed of inappropriately.
• This refrigeration appliance contains ammable refrigerants and insulation blowing gases, which must
be removed before disposal. Observe any local regulations regarding the disposal of electrical consumer
goods and dispose of it appropriately for recycling and recovery of the refrigerant. Contact your local
authorities for advice on recycling facilities in your area.
• Danger: risk of child entrapment! To avoid the possibility of child entrapment, take off the door and leave
the shelf in place before discarding your beverage chiller so that children cannot easily climb inside.

12 MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019
FAQ’s & Troubleshooting
Problem Possible Cause Possible Solution
The beverage
chiller does
not operate.
• The appliance is not plugged in.
• The appliance is turned off.
• The circuit breaker tripped or a
blown fuse.
• Plug in appliance.
• Turn on power point.
• Reset circuit breaker/replace fuse.
The beverage
chiller is not
cold enough.
• Check the temperature control
setting.
• The door is opened too often, or is
kept open for too long.
• The beverage chiller has recently
been disconnected for a period
of time. The door is not closed
completely.
• Reduce the temperature.
• Do not open door for 4 hours.
• Check that the door is closed properly
and for any obstructions preventing the
door closing properly.
The beverage
chiller turns
on and off
frequently.
• The room temperature is hotter than
normal.
• A large amount of contents has been
added to the beverage chiller.
• The door is opened too often.
• The door is not closed completely.
• The temperature control is not set
correctly.
• The door gasket does not seal
properly.
• Increase air ow into room.
• Do not open door for 4 hours to allow
beverage chiller to cool to temperature.
• Check that the door is closed properly
and for any obstructions preventing the
door closing properly.
• Check temperature setting and decrease
if required.
• Replace gasket.
Vibrations • Beverage chiller is not level.
• Beverage chiller is touching the wall
• If continued vibration occurs.
• Level beverage chiller.
• Ensure a 5cm gap from sides and top
• Turn off the beverage chiller, unplug the
power plug and contact our after sales
support centre for further assistance.
The door
will not close
properly.
• The beverage chiller is not level.
• The door was reversed and is not
properly installed.
• The gasket is dirty.
• The shelf are out of position.
• Level beverage chiller.
• Remove door and re-t.
• Clean gasket with warm water and
a soft cloth.
• Re-position shelf correctly.
Moisture
forms on the
inside chiller
walls.
• The door is slightly open.
• The door is kept open too long,
or is opened too frequently.
• The door does not seal properly.
• Check that the door is closed properly
and for any obstructions preventing the
door closing properly.
• Do not open door for 4 hours to allow
beverage chiller to cool to temperature.
• Check if gasket is damage and replace
if it is.
Moisture
forms on the
outside of
the appliance.
• The door is slightly open, causing
cold air from inside the beverage
chiller to meet warm, moist air from
outside.
• Check that the door is closed properly
and for any obstructions preventing the
door closing properly.

13
MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019
Other Useful Information
Cleaning and Maintenance
WARNING
Before cleaning the appliance, make sure it is switched off and disconnected from the power supply.
Failure to do so can result in electric shock or injury.
• Take out any beverages as well as the shelf before cleaning.
• Wash the inside surfaces with a solution of lukewarm water (1L) and baking soda (2 tbsp). Use a soft, clean
cloth to wipe down the surfaces, then rinse with clean water and dry with a dry cloth. Do not use soap or
detergent for cleaning the cabinet.
NOTE: Wring excess water out of the cloth when cleaning around the controls or electrical parts.
• Make sure to keep the door gasket (seal) clean to keep the unit running efciently.
• Wash the shelf and the outside of the cabinet with a mild detergent solution. Wipe dry with a clean soft
cloth.
• Dust or anything else blocking the vent may hinder the cooling efciency of the appliance. Always keep the
vent clean; vacuum it if necessary.
WARNING
Never clean the unit with an abrasive, acid, oil or solvent based cleaning agent. Never use ammable uids or
sprays for cleaning as the fumes from these substances can create a re hazard or Explosion.
When you are on holidays
• Leave the beverage chiller operating during holidays of less than three weeks. If you are not going to use
the beverage chiller for longer periods, remove all items and unplug the power cord. Clean and dry the
interior thoroughly. To prevent odours and mould growth, leave the door open slightly, blocking it open
if necessary.
• To move the beverage chiller, take all items out of the appliance, securely tape down the shelf and tape the
door shut. Turn the levelling leg up to the base to avoid damage.
• Protect the outside of the beverage chiller with a blanket or similar soft material and make sure the
beverage chiller stays secure in the upright position during transportation.
Rating Label

14 MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019
Other Useful Information Cont.
Defrosting
The evaporator behind the rear wall of the unit defrosts manually. With extended use, frost may build up on
the evaporator. To defrost the evaporator, unplug the unit and allow for the frost to melt. The water will then
collect in the drainage channel behind the rear wall of the unit and ows through the drainage hole into the
water drip tray by the compressor, where it can be emptied. After defrosting, the unit requires cleaning and
drying on the inside.
Power Failure
Most power failures are corrected within a few hours and should not affect the temperature of your beverage
chiller if you minimise the number of times the door is opened. If the power is going to be off for a longer
period of time, take proper steps to protect the contents.
Service and Repair
Do not attempt to alter or modify this beverage chiller in any way.
Do not attempt to repair or replace any part of the beverage chiller unless it is specically recommended in
this manual. All other servicing should be referred to a qualied technician. Contact the after sales support
line for advice.
Spare Parts
Our after sales support centre stocks the spare parts in the list below for the SBC48B – Beverage Chiller,
48L Capacity. To inquire about purchasing spare parts, call the centre on 1300 11 4357 or email us at
[e-mail]
– Front feet
– Controller
– Shelf
– Upper door hinge cover
– Upper door hinge
– Glass door
– Gasket
– Bottom door hinge
– Back feet

15
MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019
INSTALLATION
GB
20
• Ensure the unit is unplugged and empty.
• To take the door o it is necessary to tilt the unit backwards. You should rest the
unit on something solid, e.g. a chair just below the top panel.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit at as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
Reversing the Door Swing
Tools required: Phillips style screwdriver / Flat bladed screwdriver
1. Remove the top right hinge cover.
2. Undo the screws. Then remove the hinge
bracket.
3. Remove the top left screw cover. Place it on the
other side of the unit.
LBF40S17E_IB_5L_RC_190410_grace.indb 20 10/4/2019 10:58 AM
Other Useful Information Cont.
Reversing the Door Swing
Tools required: Phillips style screwdriver, Flat bladed screwdriver

16 MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019
INSTALLATION
GB
21
4. Lift the door and place it on a padded surface to prevent
it from scratching.
13
4
2
1
2
1
2
6. Remove the adjustable foot and the screws of the other
side.
5. Remove the adjustable foot, and remove the screws of the
bottom hinge.
7. Screw the bottom hinge into place
on the new side. Also screw in the
levelling foot.
The longer adjustable foot
must be assembled to bottom
hinge bracket, and the shorter
foot is for the support of the
other side.
• Do not lay the unit at as this may damage
the coolant system.
• During door reversal, when swapping the
position of the bottom hinge or adjusting
the levelling feet, tilt the unit. Do not lay the
unit at.
LBF40S17E_IB_5L_RC_190410_grace.indb 21 10/4/2019 10:58 AM
Other Useful Information Cont.

17
MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019
INSTALLATION
GB
22
9. Insert the hinge bracket and screw it to the top of the
unit.
10. Put the hinge cover back.
11. With the door closed, check that the door is aligned
horizontally and vertically and that the seals
are closed on all sides before nally tightening
the bottom hinge. Re-adjust the leveling feet as
needed.
8. Place the door back on the bottom hinge.
LBF40S17E_IB_5L_RC_190410_grace.indb 22 10/4/2019 10:58 AM
Other Useful Information Cont.

18 MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019
1
www.xxxxxxx.com
0000 000 000
60cm/90cm Canopy Rangehood
Unfortunately, from time to time, faulty products are manufactured which need to be
returned to the Supplier for repair.
Please be aware that if your product is capable of retaining user-generated data (such as files
stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs
stored on a portable media player, games saved on a games console or files stored on a USB
memory stick) during the process of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we may replace them with
refurbished goods of the same type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only used where they
meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily, you may escalate your
complaint. Please telephone us on 1300 11 43 57 or write to us at:
Residentia Group
1/32 Wangaratta St
Richmond VIC 3121
Australia
Email: [email protected]
Repair and Refurbished
Goods or Parts Notice
Beverage Chiller, 48L Capacity
165 Barkly Avenue, Burnley
VIC 3066 Australia
Email: [e-mail]
Helpline hours of operation:
Mon–Fri
9:00 AM - 5:00 PM 3

19
MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019

20 MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019MODEL: SBC48B | PRODUCT CODE: 11388 | 10/2019