Stirling STR-HVBF User manual

Installation
Let’s get your new
115L bar fridge ready to use!
Quick Start Guide
Model: STR-HVBF
Connection
1
2
3
4
5
B
CAUTION! The fridge is heavy - transport it with care! To avoid back or other injury, we
recommend you ask someone for help or use a mechanical aid when moving it.
Getting it ready for use
Before you start installing the fridge, wipe the interior surfaces and accessories with a well
wrung out cloth moistened with lukewarm water with a little baking soda added. This will
remove any dust from transit and storage and help remove the typical smell of a brand new
product. Dry thoroughly.
Where to install
The fridge is designed for freestanding use. The floor must be strong, sturdy and level —
adjust the levelling feet, if necessary. Avoid areas where the fridge would be exposed to
direct sunlight, heat, extremely cold ambient temperatures or excessive moisture. Installing
it in the coolest area of the room will save energy consumption and running costs. Allow at
least 10cm clear space at the back and sides so air can circulate freely around the fridge.
Installing the handle
The door handle comes unattached due to packaging restrictions. It is easily attached.
For comprehensive installation and usage instructions, and important safety advice, please
consult the manual.
A
Nearly done! Just a bit more on
the other side of this page...
Settling
Before plugging in your new bar fridge, let it stand
upright for approximately 24 hours to allow the
refrigerant gases to settle into the compressor.
Power connection
Plug in the fridge and secure the power supply
cord behind the unit, making sure the plug is
accessible after installation.
3
Cool down
When first starting up, and after a period out of use, allow
the unit to cool down on the coldest setting (7) for at least
2 hours before placing perishable food in the fridge.
6

Give us a call
Well done, you made it! Now sit back and relax ... your new 115L bar fridge is
automatically covered by a 3 year warranty. V1.0
10
9
Location
The thermostat dial is located on the ceiling of the cabinet.
The higher the number on the dial, the colder the
temperature (“1” is the warmest setting, “7” the coldest).
First use
The first time you turn the fridge on, set the control to
the coldest position (7). After approximately 4 hours,
adjust it to the setting that best suits your needs – a
middle setting should be appropriate in most cases.
Switching off
To turn the fridge off, first turn the thermostat control to
the minimum position (O), which will cut off power to the
compressor, then disconnect the power supply cord from
the wall outlet in order to shut off the power to the unit.
The bar fridge interior
C
8
Thermostat control
D
The refrigerator compartment is
suitable for short-term storage of
fresh food.
The walls of the fridge are
equipped with a series of
runners so you can position the
two glass shelves to suit your
storage needs.
The shelf-hanging wine rack
holds two wine bottles. It is
removable if you do not need it.
The easy-to-pull-out crisper
drawer is covered with a glass
shelf for practical fruit and
vegetable storage.
What? You mean this Quick Start Guide didn’t have ALL the answers? The manual has more
comprehensive instructions, or speak to us. Call our After Sales Support on 1300 886 649.
11
12
13
7
10
11
12
13
The door balconies provide ample storage space for food and drink bottles,
condiments, cans and jars.
Thermostat dial
7