Stone STVI101WT-01 Technical Document

Intelligent TFT-LCD Module
Model
STVI101WT-01
Equipment Manual
STVI101WT-01 Equipment Manual
Release 04/16

Contents
Preface
..................................................................................................................................... 3
1 Introduction...................................................................................................................... 5
2 Technical Parameters................................................................................................ 10
3 Interface Description.................................................................................................. 15
4 Accessories.................................................................................................................... 17
5 Installation...................................................................................................................... 19
6 Physical Dimensions.................................................................................................. 20
7 Command Set Table.................................................................................................... 21
8 Electrical Components.............................................................................................. 23
9 Naming Rule................................................................................................................... 25
10 International Certification......................................................................................... 26
APPENDIX .............................................................................................................................. 28
Glossary.................................................................................................................................. 34

Preface
This equipment manual is part of our Intelligent TFT-LCD Module documentation. It
provides the information in regards of operation, installation, configuration, function,
system as well as its technical design and working principle.
Organization of the manual
The STVI101WT-01 equipment manual is organized into the following chapters:
Chapter Contents
1 Overview of features and functional scope of the STVI101WT-01
2-3 Technical Parameters, Interface Description
4-6 Accessories, Installation, Physical Dimensions
7 VGUS system or Command Set V7.0
8-10 Electrical Components, Naming Rule, International Certification
Appendix MCU Sample Program, MCU Circuit Design, ESD Guidelines
Intelligent Customer Online Services
Intelligent Customer Support offers comprehensive additional information of
Intelligent Products through its Online services as follows:
- Official website: http://en.stone-hmi.com/
- Alibaba platform: http://shuangying-ocean.en.alibaba.com/
http://stonetech.en.alibaba.com/
- Or through telephone [phone]
Other support
In need of technical queries, please contact STONE representatives in the subsidiaries
and branches responsible for your area.
STVI101WT-01 Equipment Manual
-3-
Release 04/16

Preface
Trademarks
STONE registered trademarks are as below:
- STONE
- STONE TECH
- Intelligent HMI
- Intelligent TFT-LCD Module
Abbreviations
The abbreviation table in this equipment manual is as below:
LED Light Emitting Diode
CPU Central Processing Unit
ESD Electrostatic Sensitive Device
HMI Human Machine Interface
IF Interface
LCD Liquid Crystal Display
UART Universal Asynchronous Receiver/Transmitter
COM Commercial
DIN Data Input
DOUT Data Output
VIN Voltage Input
GND Ground
TP Touch Panel
A list of all the technical terms together with their explanations is provided in the
glossary at the end of this manual.
STVI101WT-01 Equipment Manual
-4-
Release 04/16

1
Introduction
This chapter contains general information of:
- Brief Introduction
- Warranty
- Product Characteristics
- Application Area
- Working principle
- Operation Processing
- Software Operation
STVI101WT-01 Equipment Manual
-5-
Release 04/16

Introduction
1.1 Brief Introduction
The STVI101WT-01 has been conceived as TFT monitor &Touch controller. It includes
processor, control program, driver, flash memory, RS232/RS485 port, touchscreen, power
supply etc., so it is a whole display system based on the powerful & easy VGUS operating
system, which can be controlled by Any MCU.
The STVI101WT-01 can be used to perform all basic functions, such as text display,
image display, curve display as well as touch function, Video & Audio function etc. The
User Interface can be more abundant and various. And the flash memory can store your
data, configuration files and images etc.
1.2 Warranty
All products purchased from our company are guaranteed to keep in good repair for 3 year
s. If quality problems (except human error) happen in guarantee period, our company will
maintain for free or replace the broken one unconditionally.
1.3 Product Characteristics
- With Cortex CPU & Driving device
- Controlled by any MCU
- Display Picture/ Text /Curve
- 65536 colour TFT display
- With/without Touch Screen
- RS232/ RS485/ TTL UART Interface & USB port
- Wide voltage range
- Easy to use! Powerful function! Saving cost and time!
1.4 Application Area
Widely used in various industrial field
- Medical & Beauty Equipment
- Engineering Machinery and Vehicle Equipment
- Electronic Instrument
- Industrial Control System
- Electric Power Industry
- Civil Electronic Equipment
- Automation Equipment
- Traffic
Etc.
STVI101WT-01 Equipment Manual
-6-
Release 04/16

Introduction
1.5 Working Principle
The Intelligent TFT-LCD Module communicates with the Customer’s MCU via Commands
(HEX Code), and then the MCU would control its connected equipment to work according to
the received commands.
Figure 1.3-1 Configuration and process control phases
STVI101WT-01 Equipment Manual
-7-
Release 04/16

Introduction
1.6 Operation Processing
Only 3 steps to use our TFT-LCD Module:
1. Design a group of Beautiful “Graphical User Interface”. (Ref. Picture 1.4-1)
2. Connect with customer’s MCU through RS232, RS485 or TTL level directly. Plug and play.
3. Write a simple program for MCU to control the TFT-LCD Module via Command. (HEX Code).
That’s all.
The TFT LCD module (VGUS serial port screen) serial port command frame is composed
of 5 data blocks, shown as the table 1-1.6. All serial port commands or data are represented
with hex format. The data transfer in MSB manner. E.g. for 0x1234, first send 0x12 and then
send 0x34.
Table 1-1.6 Command Frame
More information, please reference the document of Development Guide.
Picture 1.4-1
STVI101WT-01 Equipment Manual
-8-
Release 04/16
Definition
Frame
header Data length Command Data CRC check code
Length
(byte) 2 1 1 N 2
Description
R3:RA
definition
Including command, data
and check 0x80-0x84 -
Check if R2.4 is
enabled
Example
0xAB,0xBA
0x05
0x81
0x00,0x10
0x20,0x24

Introduction
1.7 Software Operation
We will offer simple "VUGS Tool Software" to help you to design the new project file for
Intelligent TFT-LCD Module on computer.
STVI101WT-01 Equipment Manual
1-2
Release 04/16
-9-

This chapter contains technical data on:
- Physical Parameters:
Physical Parameters
Display
- Hardware Parameters:
Processor
Memory
Interface
Power Supply
- Storage & Test
Electrical Characteristics
Ambient Conditions
Noise Immunity
Radio Interference
-Support Device
Support Device
STVI101WT-01 Equipment Manual
-10-
Release 04/16
2
TechnicalParameters

Technical Parameters
Physical Parameter
Size 10.1 inch
Resolution 1024×RGB×600
Pixel Spacing 0.1905mm×0.0635mm (H×V)
Color 65536 colors (16 bit)
Viewing Area 222.7mm×125.3mm
Display Dimension 225.9mm× 127.9mm
Overall Dimension
257.8mm×148.1mm×15.2mm(N)/
16.8mm(T)
Net Weight 765g(N)/795g(T)
Display
Backlight Type LED
Brightness
400cd/m2
(Brightness can be adjustable in 100 levels)
Contrast 500:1
Backlight life 30,000 hours
Viewing Angle 70°/70°/50°/60°(L/R/U/D)
TFT Panel A Class Industry Panel
Touch Screen
Industry Level 4 wire resistance
Or without touch screen is optional.
Screen Mode：Digital
Processor
CPU CortexM4200MHz
Refresh Rate 60Hz
Update Speed of per frame 63 ms/frame （16 images/s）
Memory
Flash Memory Standard 128MB, Extension 1GB
MemoryAmount for picture
According to the capability of the image,
Suggest "JPG" format.
STVI101WT-01 Equipment Manual
-11-
Release 04/16
Technical Parameters

Interface
Interface RS232/ RS485/ TTL UART Interface
Image downloading
MiniUSB2.0 (12Mbps) &U storage Disk
downloading
Power Supply
Rated voltage +12 V DC
Permissible voltage range +4.5...+20.0 V DC (or Extend to +42V)
Max. permissible transients +24 V (500 msec)
Time between two transients 50 sec minimum
Fuse, internal Electronic
Power consumption 3.0 W
Electrical Characteristics
Parameter
Condition
Min
Type
Max
Supply Current
VIN=5V
530mA
VIN=12V
220mA
VIN=20V
130mA
Signal
Input
Voltage
TTL level
VIH
2.1V
VIL
0.9V
RS232 level
V range
-15V
+15V
RS485 level
Different
Threshold -0.2V +0.2V
Signal
Output
Voltage
TTL level
VOH
3V
3.3V
VOL
0V
0.1V
RS232 level
V range
-15V
+15V
RS485 level
Different
Driver 5V
Baud Rate
1200 bps
921600 bps
Note:As the brightness lower, the current will also reduce.
STVI101WT-01 Equipment Manual
-12-
Release 04/16

Technical Parameters
Ambient Conditions
Max. permissible ambient temperature
Operation
Storage
-20℃～ +70℃
-30℃～ +80℃
Relative humidity
Operation
Storage
55℃,85%
60℃,90%
Shock loading
Operation
Storage
15 g/11 msec
25 g/6 msec
Vibration
Operation
Storage
0.035 mm (10 - 58 Hz)/ 1 g (58 - 500 Hz)
3.5 mm (5 - 8,5 Hz)/ 1 g (8.5 - 500 Hz)
Barometric pressure
Operation
Storage
706 to 1030 hPa
581 to 1030 hPa
Noise Immunity
Static discharge
(contact discharge/air discharge)
EN 61000-4-2
6 kV/8 kV
RF irradiation
EN 61000-4-3
10 V/m, 80% AM
1 kHz
Pulse modulation
ENV 50204
900 MHz ±5 MHz
10 V/meff., 50% ED, 200 Hz
RF conduction
EN 61000-4-6
150 kHz - 80 MHz
10 V, 80%AM, 1 kHz
Burst interference
Supply lines
Process data lines
Signal lines
EN 61000-4-4
2kV
2kV
1kV
Radio Interference
Radio interference level complying to
EN 55011 Class A
STVI101WT-01 Equipment Manual
-13-
Release 04/16

Technical Parameters
Support Device
Buzzer Support
RTC Support
Key-board Interface
Support
User can set dot matrix for 8*8 or 4*4
16 IO Ports for Users Support
USB port & mini USB port
Support
(Download one 800×600 picture only take
0.5S）
Touch Screen 4 Wire Resistance
Default Font
6×12/ 8×16/ 12×24/16×32 /24×48 /32×64
/48×96 /64×128 (Dot Matrix)
Picture Support JPG Format
Storage Data Support
Command Set Unified Simplified Command Sets
STVI101WT-01 Equipment Manual
-14-
Release 04/16

3
Interface Description
This chapter contains the description of the interfaces:
- VVC
- GND
- DIN
- DOUT
- BUSY
- Baud Rate
Please notify the interface type before ordering. RS232/ RS485/ TTL level interface.
STVI101WT-01 Equipment Manual
1-2
Release 04/16
-15-

Interface Description
Communication Interface Definition：
Pin
Name
Pin
NO.
Pin
Type
Interpret
GND 1,2 P Power Ground
DIN 3,4 I Data Input
DOUT 5, O Data Output
NC 6 None
VCC 7,8 P
Power Supply
Input
I: Input O: Output P: Power
Note A: 1.Adopting the 8 Pin 2mm spacing socket.
2. Direction of the signal was defined with TFT-LCD Module;
“I” refers to the signal from the user’s system transmitted to the TFT-LCD Module.
3. Pins with the same definition are connected together in the module inside.
4. User can set the RS232 or 3.3 V TTL/CMOS level by soldering pad on the PCB.
Default is “OFF” (RS232 Level). If change to “ON”(TTL Level), only need to short
the soldering pad of J21, J22, and take out R60.
5. The RS485 and other interface can be customized which need to point out in the
order.
6.”Busy” signal doesn’t need to be considered as communication, Frame and
Command never be lost, (200MHz CPU,1M bit Command Buffer), “BUSY” signal
can be accessed to data input pin or left vacant.
Note B: The selection of Baud rate for the serial interface：
Baud rate
（bps）1200 2400 4800 9600 19200 38600 57600 115200
Bode_Set
0x00
0x01
0x02
0x03
0x04
0x05
0x06
0x07
STVI101WT-01 Equipment Manual
-16-
Release 04/16

4
Accessories
This chapter contains the accessories:
- Double 8-pin Connect Cable
- DB9 Connecting Cable
- 8-pin Socket
- Mini USB Cable
- MCU board for DEMO
- Converter
- Bezel
STVI101WT-01 Equipment Manual
-17-
Release 04/16

Accessories
Accessory Name Model Note Picture
Double 8-pinCable L8 Optional：
10cm/20cm/30cm/65cm
DB9 Cable LD Connector：
Standard DB9 Joint
8-pin Socket S8 SMD-8 2.0mm with Lock
MiniUSB Cable LU
MCU Demo Board MB Demonstrate Application
Converter UR2.0 UR4.0
UR1.0
USB to RS232
USB to RS485
USB to TTL
Plastic Bezel
PS-V043
PS-V050
PS-V056
PS-V070
PS-V080
PS-V104
For: 4.3’’, 5’’, 5.6’’, 7’’,
8’’, 10.4’’ TFT-LCD
Module.
U Storage Disk
USB Downloading Batch
Function
STVI101WT-01 Equipment Manual
-18-
Release 04/16

5
Installation
This chapter contains the installation of plastic bezel.
STVI101WT-01 Equipment Manual
-19-
Release 04/16

6
Physical Dimensions
This chapter contains the information of Physical Dimensions.
Figure 6-1 STVI101WT-01 dimension
STVI101WT-01 Equipment Manual
-20-
Release 04/16