Storage 4 Crafts storeaway Clovelly User manual

Clovellystore
away
Assembly Instructions
revised 0620 - 1.0

It is strongly recommended to have two persons present when
assembling this item. We advise that you unpack the boxes in
the order shown in these instrucons and follow the assembly
instrucons carefully.
Please be careful during construcon as secon of the cupboard
may be unstable unl construcon is complete.

Your hardware pack should contain the following:
CONNECTING
BOLT (CB1)
X 37
CONNECTING
LOCK (CL1)
X 37
SHELF
PEG (SP1)
X 48
SCREW (35-17D)
X 16
HOOK (AH1)
X 5
BLACK CASTOR
With Brake (C3)
X 4
SHELF
CLIP (SR1)
X 24

CLOVELLY
(BOX 1)
STEP 1
You will need to open box -
screw in to
this point
CB1
Screw CB1 Bolts into all
the holes marked with
a red circle
Insert CL1 Locks into
the holes as indicated
with a blue circle
CLOVELLY
(BOX 3)
&
CLOV-SMSIDE

STEP 2
Insert CL1 Locks into
the holes as indicated
with a blue circle
CLOV-LGEBACK
CLOV-SMLBACK

STEP 4
screw in to
this point
CB1
Screw CB1 Bolts into all
the holes marked with
a red circle
Insert CL1 Locks into
the holes as indicated
with a blue circle
CLOV-TCD
CLOV-MIDSH
(SIDE 1 BOTTOM)

STEP 5
CLOV-MIDSH
(SIDE 2 TOP)
screw in to
this point
CB1
Screw CB1 Bolts into all
the holes marked with
a red circle

STEP 6
CLOV-LGEBACK
CLOV
SMLBACK
CLOV-SMSIDE
CLOV-TCD
Connect together the CLOV-LGEBACK and the CLOV-SMSIDE by slong the panels together and turning
the connecng locks in the LGEBACK to ghten
STEP 7
Connect together the CLOV-SMLBACK and the CLOV-TCD by slong the panels together and turning
the connecng locks in the SMLBACK to ghten
STEP 8
Connect the two secons you have ust made to the CLOV-MIDSH as shown below and ghten the connecng
lock in the CLOV-TCD and the CLOV-SMSIDE
CLOV-MIDSH

STEP 9
CLOV-LGESIDE
screw in to
this point
CB1
Screw CB1 Bolts into all
the holes marked with
a red circle
Insert CL1 Locks into
the holes as indicated
with a blue circle

STEP 10
Connect the secon you constructed in STEP 8 to the CLOV-LGESIDE as shown below and ghten the connecng
locks in the CLOV-LGEBACK, CLOV-SMLBACK and the CLOV-MIDSH
CLOV-LGEBACK
CLOV
SMLBACK
CLOV-SMSIDE
CLOV-TCD
CLOV-LGESIDE

STEP 11
CLOV-LGERS
X2
Insert CL1 Locks into
the holes as indicated
with a blue circle

STEP 12
Fit the 2 x CLOV-LGERS as shown below and ghten the connecng locks.
CLOV-LGERS

STEP 13
CLOV-TOP
screw in to
this point
CB1
Screw CB1 Bolts into all
the holes marked with
a red circle

STEP 14
Aach the CLOV-TOP to the secon that you have already constructed and ghgten all of the
connecng locks.

STEP 15
screw in to
this point
CB1
Screw CB1 Bolts into all
the holes marked with
a red circle
CLOV-BASE
(top)
CLOV-BASE
(underneath)
Aach the four castors
to base as indicated

STEP 16
Aach the CLOV-BASE to the secon that you have already constructed and ghgten all of the
connecng locks.

STEP 17
Fit the CLOV-LGESH
and the CLOV-SML-SH
as shown - the
back of the shelf
is supported on an
SP1 peg and the
front of the shelf
is xed using an
SP1 and a SR1 clip.
&
CLOV-LGESH
CLOV-SMLSH

STEP 18
Fit the CLOV-LGERSH
and the CLOV-SML-RSH
as shown - the
back of the shelf
is supported on an
SP1 peg and the
front of the shelf
is xed using an
SP1 and a SR1 clip.
Fit acrylic into slots
in the shelves and the
base as required
Fit Hooks to the
CLOV-SMLBACK
in the pre drilled holes
CLOV-LGERSH
CLOV-SMLRSH
ACRYLIC

The Storeaway Clovelly unit is designed and manufactured in the UK by:
CRAFTS
storage
www.storage4crafts.co.uk
Clovellystore
away