Strata DK24 User manual

High Quality Original Manuals for you
Visit us on the Internet
[e-mail]

To set up a Two CO Line
Connection:
While on an outside call established
on a CO button, press the
Press another CO button and dial a
telephone number.
Press button after
the called answers.
button
again, then hang up.
The two outside parties are
conversing.
U I C K
G U I D E
STRATA DK

To enter a Forced
Account Code:
Access an outside line by dialing a
line access code or pressing a
CO or
button.
Enter the Forced Account Code.
Listen for dial tone.
Dial a telephone number.
To enter a Voluntary
Account Code:
After seizing a CO line or while on
a call: Press the
button;
or dial * 5 0; or press the
button and dial 4 6.
Enter the Account Code
To activate Automatic
Busy Redial:
After dialing an outside telephone
number, press the ARR button,
or press the button
and dial 4 4.
Your telephone will signal you
when the called number becomes
not busy.
To cancel Automatic Busy Redial,
press the ARR button, or press
the button and dial 4 4.
To activate Automatic
Callback:
After dialing a busy station or
station in the Do Not Disturb
mode, press the
button or
dial 4.
-Hang up. The system will call you
back when the station becomes
available.
To redial the Last
Number Dialed:
Lift the handset and press any
available CO button.
Press the RDL (or button.
To “Save” a number to
redial later:
Any time after dialing a telephone
number and before disconnecting
the call, press the
button.
To redial a “Saved”
number:
Access an outside line, then press
the
button.
To store a Speed Dial
number:
Press the RDL (or button, then
the
SDS button.
Press the SD button you want to
store the telephone number on, or
dial a Speed Dial access code
(1 0 4 9 for Station Speed
Dial, 6 0 9 9 for System
Speed Dial) where you want to
store the number.
Enter the telephone number, then
press the RDL (or #) button.
To make a call with
Speed Dial:
Access an outside line.
Press a SD button, or press the
SDS (or button and dial a
Speed Dial access code
(1 0 4 9 for Station Speed
Dial, 6 0 9 9 for System Speed

To leave a Message
Waiting Indication at
another station:
After reaching a busy or
unanswered station, press the
button.
To answer a Message
Waiting Indication at your
station:
The Message Waiting Indication is
indicated by a flashing
LED.
Lift the handset, press the
button, then press the
button to call back the station or
voice mail device that left the
indication.
To make a Busy Override
or Executive Override
call:
To make a Busy Override call, dial
2 after dialing a busy station.
To make an Executive Override
(barge-in) call, dial 3 after
reaching a busy station.
To make a Page
announcement:
.
Lift the handset and press the
button.
To page all stations in the All Call
Page group, dial 3 0; station
groups, dial 3
1 3 4; the All Call
Page group with external page
zones optionally included, dial
3 9; external page zones, dial
35-38.
To set Call Forward with
a Call Forward button:
Press a Call Forward button:
CFAC, CFB, or
Enter the station number to which
calls will forward.
Press the Call Forward button
again.
To set Call Forward with
an access code:
Press the button and dial a
Call Forward access code: Call
Forward-All Calls, 6 0 4; Call
Forward-Busy, 6 0 2; Call
Forward-No Answer, 6 0 3; Call
Forward-Busy/No Answer, 6 0 4.
Enter the number of the station to
which calls will forward.
Press the SPKR button.
To cancel Call Forward:
Press the same Call Forward
button that you used to set Call
Forward; or press the
button, dial 6 0 1, then press the
SPKR button.
To Park a call:
While on a call, press the
button and dial 4
To retrieve the Parked
call:
Press the button and dial 4 2.

To Pick Up a call:
Press the PKUP button or dial 5.
To pick up a call that is ringing or
held at a station, dial the station
number; for an intercom page or
ringing door phone, dial 3 0; on
an external page, dial 3 5; for a
CO line on hold, dial 7 0
1
7 3 6; for any ringing CO line,
dial 9.
To Transfer a call:
While on a call, press the
TRNS button and dial a station
number.
If the station is idle: Wait for the
station to answer, make a voice
announcement and hang up.
If the station is busy: Hang up.
To make a Conference
Call:
While on a call, press the
TRNS button.
To add an outside line to the call,
access an outside line and dial a
telephone number; to add a
station to the call, dial a station
number.
Press the button
after the called party answers. All
parties are together.
To activate/deactivate
Do Not Disturb:
To activate, press the DND button
so that the LED lights; to
deactivate, press the button again
so that the LED turns off.
To place a call on
Exclusive Hold:
Press the HOLD button twice.
No one can accidentally pick up
your call.
To receive a Handsfree
Answerback call:
You will hear a single warning tone
followed by the caller’s voice.
Without lifting the handset, speak
toward the telephone at a normal
voice level to answer the caller.
To use Handsfree
Monitoring:
While holding down the SPKR
button during a call, place the
handset on-hook.
Release the SPKR button.
Lift the handset to resume the
conversation.
To make an outside call:
Press a CO or button; or, press
the
INT button and dial a line
access code (7 0 I- 7 3 6,
8 1 -8 8, or 9).
Dial a telephone number, and lift
the handset when the called party
answers.
To make a call to another
station:
Lift the handset and press the
button.
Dial a station number.