Streamline PR1 User manual

STREAMLINE
®
INSTRUCTION MANUAL
INSTR-PR1
English
PR1
PR16002-AS
PR18002-AS
Codes:
STREAMLINE®
Electric Powerdrive
Hose Reel

STREAMLINE
®
2W: www.streamline.systems E: [e-mail] T: [phone] W: www.streamline.systems E: [e-mail] T: [phone]
• Place your in Electric Hose Reel a suitable position
• Ensure you leave enough space to manually operate the reel with the handle kit
should it be required.
• Check underneath the vehicle below where the hose reel is situated to ensure
that you can find multiple fixing points without obstruction
• Ensure that the hose reel is bolted through the peaks of the undulated floor
and not through the troughs (See figure 1).
• Remove the hose reel controller to enable access to the mounting
points underneath
• We recommend that you have a least four mounting points, 2 at the front and 2 at
the back (See Figure 2). The further apart the bolt centers, the better!
• Once you selected an appropriate position for your hose reel, drill the holes that
you have selected and fit the bolt down kit as shown in below.
• After the hose reel is secured, place the controller back onto its mounting pegs
and screw down securely
Installation Instructions
Figure 1 Figure 2 Figure 3
Electrical connections
Operational instructions
Once your hose reel has been fixed in position, run the length of conduit up to your
system battery in a place where it will not be crushed by other items in your vehicle.
For connections to the battery please refer to the hose reel controller quick start guide sent
with this item.
Please refer to the hose reel controller quick start sent with this item for the operation of the
control unit
Do not expose the hose reel to freezing conditions as internal seals may split causing leaks. If this
occurs, repairs/replacements will not be covered under warranty.
• Take a step back from the hose reel to ensure that your hands are clear of the reel
• We recommend that you start with a low speed of 20 – 30 and build your speed up as you
become competent using the electric hose reel unit
• We recommend a maximum speed of 60.
• When reeling the hose in, ensure that the environment you are working in is free from
any members of the public, animals, and any apparent obstructions

STREAMLINE
®
4W: www.streamline.systems E: [e-mail] T: [phone] W: www.streamline.systems E: [e-mail] T: [phone]
• STREAMLINE® systems can be built according to customers’ exact requirements
• For non-standard systems, the user’s needs or specifications are listened to and turned
into reality.
• Whilst price is important, quality is remembered long after price is forgotten
• We insist on sourcing brand name products from around the world, only of a reputable
quality, and bring them together under the STREAMLINE® name
• All STREAMLINE® products carry a full one year’s warranty, according to the manufacturers’
standard terms and conditions of sale.
• We have an in-house technical helpline able to answer most of your questions relating to the
capabilities and functionalities of all STREAMLINE® products
• If we get it wrong, we will put it right. If you are sent a wrong item, we will immediately
attend to sending you the correct item and arrange a collection of the wrong item without
any quibbles
• STREAMLINE® is backed by a comprehensive range with massive stocks providing you with a
‘one stop shop’ for all your requirements.
Flexibility
Quality
Service
Why STREAMLINE®?
STREAMLINE® Warranty
MANUFACTURED
IN THE
UNITED KINGDOM
CHECKED AND
TESTED BY
QUALITY CONTROL
The warranty on all Machines and Equipment is
for 1 year (12-months) from RECORDED DATE
OF PURCHASE.
THIS WARRANTY EXCLUDES NORMAL
MAINTENANCE ITEMS, including but not limited
to HOSES, FILTERS, O-RINGS,
DIAPHRAGMS, VALVES, GASKETS,
CARBON BRUSHES and damage to motors
and other components as a result of failure to
replace normal maintenance items. THIS LIST
IS NOT EXHAUSTIVE.
If STREAMLINE® receives notice of such defects
during the warranty period, STREAMLINE®
will either, at its opinion, repair or replace
components which prove to be defective.
Replacement parts will only be supplied under
warranty, upon the inspection and approval of
the defective parts by STREAMLINE®.
Should it be necessary to supply replacement
parts before the opportunity to inspect, these
will be charged at current prices and credit will
only be issued upon subsequent inspection and
warranty approval by STREAMLINE®.
The customer is responsible for the cost of
return of the defective part. If warranty is
approved, STREAMLINE® will pay for the cost
of the repaired or replacement part.
This warranty excludes the following conditions
and circumstances which are at the discretion
of STREAMLINE®:
Wear and tear, misuse, abuse improper
maintenance, frost damage, the use of chemicals
other than those supplied or approved by
STREAMLINE®, improper installation or repair,
unauthorised modification, incidental or
consequential costs, loss or damage, service,
labour or third party charges, the cost of
returning defective parts to STREAMLINE®.
This warranty constitutes the exclusive remedy
of any purchaser of a STREAMLINE® unit and
is in lieu of all other warranties, express or
implied, including without limitation any implied
warranty of merchantability or fitness for use, to
the fullest extent permitted by law. In no event
shall any implied warranty of merchantability or
fitness for use exceed the term of the applicable
warranty stated above and STREAMLINE® shall
have no other obligation or liability.
Important
Unfortunately these rights cannot be
transferred to a third party.

Hamilton House, 8 Fairfax Road,
Heathfield Industrial Estate,
Newton Abbot
Devon, TQ12 6UD
United Kingdom
Telephone: [phone]
Email: [e-mail]
Visit www.streamline.systems
INSTR-HRM4
Hamilton House, 8 Fairfax Road,
Heathfield Industrial Estate,
Newton Abbot
Devon, TQ12 6UD
United Kingdom
Telephone: [phone]
Email: [e-mail]
Visit: www.streamline.systems INSTR-PR1