STRILING SM-102 User manual

Features:
WATER
CAPACITY
800mL
For thorough steam cleaning
of hard floors and carpets
800ml
Water Capacity
POWER
Powerful steam generation
for easy cleaning
1500W Power
15-30 SEC
INSTANT STEAM
Fast heat-up time for
steam production
15-30 Second
Instant Steam
STEAM
TRIGGER
Integrated into
handle for easy use
Steam
Trigger
STEAM MOP
800mL Water Tank
2 Reusable Microfibre Pads

For more information
please visit www.stirlingappliances.com.au
or call 1300 886 649
Quick Start Guide
This Quick Start Guide only contains basic information. Please read the full manual for
comprehensive instructions and safety advice before first use. The relevant sections in the
manual are listed in brackets below. You will need a Phillips head screwdriver to assemble.
CAUTION:
- Always ensure the unit is unplugged from the electrical outlet
before filling or refilling the water tank.
- To avoid scalding and burns, take extra carpet when using the
steam mop. Never point the mop at persons, pets or plants,
and only use it on surfaces that can withstand high heat.
Model Number SM-102
Colour Red
Power 1500W
Warranty 3 Years
Version QSG-V1.1
Step 1 – Assembling the appliance:
Attach the triangular steam head to the body of the
steam mop and secure it tightly with the small head
fastening screw. Then insert the handle into the body
of the steam mop and fasten with the large screw
(page 10). Place the microfibre cloth pad onto the
mop head and fasten using the cord and toggle
(page 11).
Step 2 – Filling the water tank:
Push the water tank up to detach it from the steam
mop. Fill with fresh tap water, making sure not to overfill
past the MAX marking. Reinstall the tank, pushing it
securely into place (page 11).
Step 3 – Steam-cleaning floors:
Before use, make sure that the surfaces to be
steam-cleaned have been swept or vacuumed. Plug
in the appliance and after about 15-30 seconds, press
the trigger switch to start releasing steam. Slowly pass
over the surface to be cleaned in a forward and
backward or sideways motion, or leave for a few
seconds over the area for more intensive cleaning
(page 13). To refresh carpet, place the mop head into
the carpet glider for better manoeuvrability (page 11).