Strong SRT 5434 User manual

High Denition Digital Receiver
SRT 5434
User Manual

Warranty Information
This product comes with a 12 month manufacturer’s warranty from
the date of purchase.
This unit has a 30 days replacement warranty for manufacturing
faults.
Within this period please return the faulty product with all its
supplied accessories to either the place of purchase or STRONG
Australia accompanied by the original purchase receipt.
After this 30 days period the unit must be returned to STRONG
Australia for testing, and if deemed faulty, will be repaired or
replaced at the discretion of STRONG Australia Pty Ltd. The faulty
product can either be sent to STRONG Australia directly or via your
place of purchase for evaluation.
STRONG Australia will cover any reasonable costs incurred in
returning the faulty product for evaluation should the product
be deemed as genuinely faulty. If the product is found to have no
fault, the costs incurred in delivering product to and from STRONG
Australia will be the customer.
Our goods come with guarantees that cannot be excluded under
Australian Consumer Law. You are entitled to a replacement or
refund for major failure and for compensation for any reasonably
foreseeable loss or damage. You are also entitled to have goods
repaired or replaced if the goods fail to be of acceptable quality and
the failure does not amount to a major failure.
STRONG Australia Pty Ltd
60 Wedgewood Rd, Hallam. VIC. 3803
Ph: [phone] FAX: [phone]
1

Table of Contents
Safety Instructions 3
Reference & Software Update 4
Product Overview
Front Panel 5
Rear Panel 5
Remote Control Functions 6
Installation
Connecting to a Television 8
First Time Installation 9
Basic Unit Operations 10
1/Program Management Settings 10
a) Program Edit
b) EPG - Electronic Program Guide
c) Sort Channels
d) Creating favourite channel list
e) View favourite channels
2/Picture Settings 10
a) Aspect Ratio
b) Resolution
c) TV Format
d)3D Output
3/Channel Search 11
a) Auto Search
b) Manual Search
4/System Settings 11
a) Set Password
b) Restore factory default
c) System Information
5/ USB 12
a)Multimedia
b)Recording - Instant Recording, Schedule Recording
c) Time Shift
d) Playback Recorded Files
e) Delete Recorded Files
6/ Clock & Time Settings 13
7/ Trouble Shooting 14
8/ Unit Specications 16
2

Safety Instructions
Safety Precaution
This STB has been designed and manufactured to satisfy the
International safety standards. Please read the following safety
precautions carefully before operating this receiver.
Main Supply:
Before operating, please check the units operating voltage is
100-240V AC 50/60HZ
Overload:
Do not overload a wall outlet, extension cord or adapter, neither
use damaged power cord or touch it with wet hand as this may
result in electric shock.
Liquid:
The receiver shall not be exposed to dripping or splashing water,
and that no objects lled with liquids, such as vase, shall be
placed on the apparatus.
Ventilation:
Keep the slots on top of the receiver uncover to allow sucient
airow to the unit. Do not put the receiver on soft furnishings or
carpets. Do not expose the receiver to direct light or do not place
it near a heater or in humid conditions. Do not stack other
electronic equipments on top of the receiver.
Cleaning:
Plug out the receiver from the wall outlet before cleaning. Clean
the receiver by a soft cloth or mild solution of washing-up liquid
(no solvents).
3

Connection:
Disconnect the receiver from the mains when you connect it to
Antenna or disconnect it from Antenna. Failure to do so, could
possibly cause damage to the Antenna.
Location:
Put the receiver indoor in order to avoid lightening, raining or
sunlight.
Uncover:
Do not remove the cover, to reduce the risk of electric shock.
Contact qualied and licensed service personnel to repair the
receiver, or contact your dealer.
Reference
Auto Search
Manual Search
PAL/NTSC Conversion
True full Color (32 bits) on screen display (OSD)
Menu language supported: English
Multi-language audio supported
Multi-language DVB Subtitle output
7 days Electronic Program Guide (EPG)
Teletext output through VBI and OSD.
USB 2.0 Interface
Software update:
If new software becomes available for this model, it can be
downloaded from our website (www.strong.com.au) and then
placed onto a USB. Plug in the USB into the USB port on the unit
and then go to:
Menu > System > Software Update >USB Upgrade
4

Product Overview
Front Panel
1. Power button : Switch between operation and standby modes.
2. Up & Down Channel: Change channel in viewing mode and
move the cursor up in menu mode
3. Display : It displays channel information. In standby mode it
displays local time.
4. Power /Signal light : Power /signal indicator.
5. USB2.0 : Single USB 2.0 Host Port.
Rear Panel
1. ANT IN : Connect the antenna cable.
2. ANT OUT : Loop out to pass signal through
3. COAXIAL : Digital Audio output (Optical).
4. DV-OUT : Connect to the TV using an HDMI cable
5. AUDIO R/L / VIDEO : Connect to the TV using RCA cabling
6. DC-5V : Connect to the power using power adapter.
*Note: For best results, use HDMI cable and RG6 Quad Shielded antenna cabling
1 2 3 4 5
1 2 3 4 5 6
5

Remote Control Functions
6
1
4
3
89
2
5
6
10
11
12
13
14 15
16
17
18 19
20 21
22
22
23
24
24
25 26
29
27
31
30
32

1. POWER: Turns the receiver On/
Standby
2. MUTE: Mutes audio output of the
receiver
3. ZOOM: To open the recordings list
when in viewing mode. Zoom in on
Photos when in Photo mode
4. ASPECT: Change aspect modes:
4:3, 16:9 and to Auto.
5. V-FORMAT: Change video
resolution modes: 576i to 1080p
(PAL) 480i to 1080p (NTSC)
6. TIMER: Call directly Timer menu to
view or set timers
8. AUDIO: Shows list of available
audio type or language. Temporary
override of Main menu audio
setting.
9. SUB: Shows list of available
subtitle languages Temporary
override of the subtitle setting in the
main menu
10. DVR : to access USB & Recorded
11. FAV: Favourite group selection
12. Fast rewind
13. Fast forward
14. Jumps to previous item in
playlist
15. Jump to next item in playlist
or resume Timeshift
17. TIMESHIFT/ : Start Timeshift
mode or pause
18. Records the TV program to the
connected storage device
19.
20. MENU: Opens the main menu, in
menu you will get
one step back
21. EXIT: Exits from the menu or
sub-menu
previous/next.
Menu On: Moves the cursor up/
down.
current channel list
the volume level
Menu On: Change settings for
25. INFO: Shows the current channel
information
Press twice for program and
technical information.
26. EPG: Shows the EPG (Electronic
Program Guide) in TV mode
27. V+/V-: Increases/decreases the
volume level
29. P+/P-: Channel up/down in
channel list mode
30. 0~9: Channel selection or value
input
31. TV/RADIO: Toggles between TV
or RADIO mode
32. RECALL: Back to previous shown
channel
7
Stop of playback or Timeshift

Connecting to a Television
8