Sub-Zero 600 Series BI-30U User manual

Over-and-under Model BI-30U offers easy-
access refrigerated storage with a roll-out
freezer drawer. Sub-Zero dual refrigeration
along with new air purification and water
filtration systems guard the freshness of
your food and water like nothing before.
Framed, overlay/flush inset and stainless
steel models are available. New flush inset
installation allows the unit to sit flush with
surrounding cabinetry. Model BI-30U/S is
Energy Star qualified.
New Built-In Model BI-30U
Over-and-Under
Interior Features
Refrigerator
12.7 cu ft Capacity
Air Purification System
3 Adjustable Glass Shelves
1 Stationary Glass Shelf
1 High-Humidity Drawer with Divider
1 Storage Drawer with Divider
2 Adjustable Door Shelves
1 Stationary Door Shelf
Adjustable Dairy Compartment
Freezer
4.1 cu ft Capacity
Water Filtration System
Full-Extension Roll-Out Freezer Drawer
Two-Tier Wire Storage Baskets
Automatic Ice Maker
Model BI-30U shown with stainless steel flush inset panels and tubular handles.
Accessories
Louvered, panel and stainless steel grilles
for 83", 84" and 88" finished heights
Stainless steel front panels for framed,
flush inset and dual flush inset applications
with stainless steel finish and handle
options
Side panels in classic stainless steel and
white
Stainless steel tubular, pro or curved
handles and full-length extended handles
Dozen egg container with lid
Dual installation kit
90° door stop kit
Accessories are available through your Sub-Zero
dealer. To obtain local dealer information, visit the
Showroom Locator section of our website,
subzero.com.
Features
Framed, overlay/flush inset and
stainless steel design applications
Flush inset installation option allows unit
to sit flush with surrounding cabinetry
Air purification system
Water filtration system
Model BI-30U/S is Energy Star qualified
with $47 annual energy usage
Dual refrigeration system
Flip-up grille for easy access to condenser
Evenly-distributed bright interior lighting
Door shelves are adjustable in one-inch
increments
Crisper and deli drawers form a special
low-temperature zone
Informational freshness cards inside unit
Max ice feature to increase rate of ice
production for a 24-hour period
This appliance is certified by Star-K
to meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
Flip-Up Grille Air Purification System
Model Options BI-30U/F BI-30U/O BI-30U/S/TH BI-30U/S/PH BI-30U/S/CH
Design Framed Overlay/Flush Inset Stainless Stainless Stainless
Grille Louvered Panel Stainless Stainless Stainless
Handle Full-Length * Tubular Pro Curved
*Handle not included to allow for design flexibility.
Model BI-36U shown.

Installation Notes
Built-In models may be used in a standard
installation or in a flush inset installation which
allows the unit to be flush with surrounding
cabinetry.
Built-In over-and-under models with opposite
hinges can be used in a dual installation.
Complete installation specifications, including
panel sizes, can be found on our website,
subzero.com.
Specifications
Overall Dimensions 30"W x 84"H x 24"D
Door Clearance Standard 311/4"
Flush Inset 313/4"
Opening Width 291/2"
Flush Inset Width 32"
Opening Height 833/4"
Flush Inset Height 84"
Opening Depth 24"
Flush Inset Depth 263/16"
Electrical Requirements 115 V AC, 60 Hz
15 amp circuit
Plumbing Requirements 1/4" OD copper line
30–100 psi
Shipping Weight 430–462 lbs
Built-In Model BI-30U
Overall Dimensions
Unit dimensions may
vary by ±
1
/ 8 " (3).
30"
(762)
84"
(2134)
24"
(610)
237/8"
(606)
BEHIND
FRAME
30"
(762)
311/4"
(794)
291/4"
(743)
751/2"
(1918)
7"
(178)
6"
(152)
E
LOCATE
ELECTRICAL
WITHIN
SHADED AREA
1/2"
(13)
18" (457)*6"
(152)
24" (610)
OPENING
DEPTH
263/16"
(665)
FLUSH INSET
DEPTH
SHUT-OFF
VALVE
OUTLINE
OF FLUSH INSET
APPLICATION WITH
3/4"(19) PANEL
18"
(457)
W
LOCATE WATER SUPPLY
WITHIN SHADED AREA
6"
(152)
FRONT VIEWSIDE VIEW
TOP VIEW
833/4"
(2127)
OPENING
HEIGHT
84"
(2134)
FLUSH
INSET
HEIGHT
1/4" (6) 23/16"
(56)**
3" (76)
291/2" (749)
OPENING WIDTH
32" (813)
FLUSH INSET WIDTH
11/4"
(32)
11/4"
(32)
23/16"
(56)**
24" (610)
OPENING
DEPTH
263/16" (665)
FLUSH INSET
DEPTH
*ANTI-TIP BRACKET MUST NOT
INTERFERE WITH WATER LINE.
REFER TO INSTALLATION
INSTRUCTIONS FOR COMPLETE
DETAILS.
**ASSUMES 3/4"(19) PANEL
THICKNESS.
EXTEND WATER LINE APPROX
36" (914) FROM BACK WALL.
WATER LINE
1/4"
(6)
11/4"
(32)
FLUSH INSET
DETAIL
23/16"
(56) 24" (610)
OPENING
DEPTH
751/2"
(1918)
7"
(178)
6"
(152)
E
LOCATE
ELECTRICAL
WITHIN
SHADED AREA
18"
(457)
W
LOCATE WATER SUPPLY
WITHIN SHADED AREA
6"
(152)
FRONT VIEWSIDE VIEW
833/4"
(2127)
OPENING
HEIGHT
291/2" (749)
OPENING WIDTH
3" (76)
24" (610)
OPENING
DEPTH
1/2"
(13)
18" (457)*6"
(152)
24" (610)
OPENING
DEPTH
SHUT-OFF
VALVE
OUTLINE OF
FRAMED, OVERLAY
OR STAINLESS
STEEL MODEL
TOP VIEW
*ANTI-TIP BRACKET MUST NOT
INTERFERE WITH WATER LINE.
REFER TO INSTALLATION
INSTRUCTIONS FOR COMPLETE
DETAILS.
EXTEND WATER LINE APPROX
36" (914) FROM BACK WALL.
WATER LINE
Flush Inset Installation
Installation Specifications
Standard Installation
*Anti-tip bracket must not interfere
with water line. Extend water line
approximately 36" from back wall.
**Dimensions based on
3
/ 4 " (19)
panels.
*Anti-tip bracket must not interfere
with water line. Extend water line
approximately 36" from back wall.
Dimensions in parentheses are in
millimeters unless otherwise specified.