Sub-Zero UC-24B User manual

Planning Information
Undercounter Model UC-24B
Beverage Center
1
Dimensions in parentheses are in
millimeters unless otherwise specified.
2/07
Easy-access
electronic controls
Spill-proof cantilever
glass shelf
Location of rating/
serial number plate
Accent lighting
Wine storage
shelves
Overlay or classic
stainless steel design
Clear utility bin
Spill-proof glass
floor
Double-pane glass
door
Matches appearance
of Wine Storage
Model 424
Model UC-24B/O
Overlay
Model UC-24B/S
Classic Stainless
Steel
Sub-ZeroUndercounter units simplify life at home by
bringing refrigeration anywhere it's needed. Fresh
greens in the kitchen island. Soda and snacks in the
media room. Chilled wine and mineral water in the
master suite. Imagine how this innovative built-in unit
can serve you.
The all refrigerator Model UC-24B, with full-view glass
door,can be ordered in the overlay or classic stainless
steel design.
The Model UC-24B offers more features than ever.
The easy-access electronic controls with LCD display
are visible through the glass door. Two wine storage
shelves hold 16 (750 ml) bottles and a clear utility bin
stores smaller items.
This appliance will be certified byStar-K
to meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
The Sub-Zero Undercounter all
refrigerator Model UC-24B, with full-view
glass door, is available in your choice of
the overlay or classic stainless steel
design application. A high altitude glass
door unit may be special ordered for
installations at or above 5,000' (1524 m)
in elevation.

Planning Information
Undercounter Model UC-24B
2
Overall dimensions shown in the overlay
design application with standard full-view
glass door.
Dimensions may vary by ± 1/8"(3).
Dimensions in parentheses are in
millimeters unless otherwise specified.
FEATURES
All refrigerator beverage center with wine
storage to accommodate 16 (750 ml) bottles
Overlay or stainless steel design application
with standard full-view glass door
Easy-access electronic controls with LCD
display visible through the glass door
Roller-glide wine storage shelves faced with
natural cherry wood have a three-quarter
extension for easy access
Adjustable spill-proof cantilever glass shelf
and spill-proof glass floor
Clear utility bin for storage of smaller items
Double-pane, full-view glass door and accent
lighting matches appearance of Wine
Storage Model 424
High altitude glass door model can be
special ordered
Optional lock available as a sales accessory
UL approved for US and Canada
Two, five and twelve year residential
warranty—exclusions apply, see warranty at
the end of this guide
OVERALL DIMENSIONS
90˚
253/8"
(645)
TOP VIEW
F
FRONT VIEW SIDE VIEW
(CABINET DIMENSION)
4
(102)
3
4
(273)
10
CENTERED
VERTICALLY
DOOR FRAME
(597)
1
2
23
30
(767)
DOOR
FRAME
*34
(864)
(587)
1
8
23
3
16
23 7
8
(606)
*
1/2"(13) +
_ADJUSTMENT IN LEVELING LEGS

Planning Information
Undercounter Model UC-24B
Dimensions in parentheses are in
millimeters unless otherwise specified. 3
SPECIFICATIONS
Model UC-24B Undercounter Beverage Center
Overall Width 237/8"(606)
Overall Height 34" (864)
Overall Depth 24" (610)
Refrigerator Capacity 5.7 cu ft (161 L)
Wine Storage Capacity 16 Bottles (750 ml)
Door Swing Clearance 253/8"(645)
Electrical Requirements 115 V AC, 60 Hz
15 amp dedicated circuit
Annual EnergyUsage 424 kWh / $ 39
(based on 9.06 cents per kilowatt hour)
Shipping Weight Overlay – 130 lbs (59 kg)
Stainless Steel – 135 lbs (61 kg)
Special Note High altitude glass door unit is available
for elevations 5,000' (1524 m) or above
Specifications are subject to change without notice.
MODEL OPTIONS
Overlay Design UC-24B/O
Classic Stainless Steel UC-24B/S
DOOR OPTIONS
High Altitude Glass Door UC-24BA/O
UC-24BA/S
You must allow 90 days from order to
delivery for high altitude glass door
model.
ACCESSORIES
Classic stainless steel tubular
handle for overlay application
Polished chrome handle for
overlay application
UL approved door lockkit
Accessories are available through your
Sub-Zero dealer. To obtain local dealer
information, visit the Locator section of
our website,subzero.com.

Planning Information
Undercounter Model UC-24B
4
INSTALLATION SPECIFICATIONS
DIMENSIONS
Finished Rough Opening Width 24" (610)
Finished Rough Opening Height 34 1/2"(876)
Finished Rough Opening Depth 24" (610)
Location of Electrical Within shaded area
See Installation Instructions shipped with unit for detailed specifications.
341/2"
(876)
ROUGH
OPENING
HEIGHT
341/4"
(870)
MINIMUM
HEIGHT
REQUIRED
24" (610)
ROUGH OPENING
WIDTH
151/2"
(394)
2
LOCATE ELECTRICAL
WITHIN SHADED AREA
3" (76)
2" (51)
FRONT VIEW
ANTI-TIP BRACKET
24"
(610)
ROUGH
OPENING
DEPTH
TOP VIEW
F
Dimensions in parentheses are in
millimeters unless otherwise specified.

Planning Information
Undercounter Model UC-24B
Dimensions in parentheses are in
millimeters unless otherwise specified. 5
INSTALLATION NOTES
Refer to the illustrations and specifications
for overall dimensions, finished rough opening
dimensions and installation specifics.
For corner installations, you need allow for a
minimum 3" (76) filler so the door can open to
90˚. If you are using some larger handle
hardware, you will also need to take that into
account.
The anti-tip bracket must be installed to
prevent the unit from tipping forward.
When planning to install the Undercounter
unit next to adjoining cabinetry, you must make
provisions to allow the door to open to a
maximum of 145˚ and not interfere with the
door panel. Refer to the full-scale illustration on
page 10 for cabinetry dimensions.
For the overlay design, you will need to
provide a frame panel for the glass door.
Refer to the overlay door panel information on
page 6.
IMPORTANT NOTE: Asolid door panel must
not be installed on a glass door unit, as this
may cause moisture to form behind the panel.
For the overlay panel application, you must
supply your own handle hardware.It is recom-
mended you use our optional handles and use
the pre-drilled holes supplied to locate the
handles within the frame of the unit.
For the overlay model, the weight limit for a
frame panel for the glass door unit is 10 lbs
(5 kg). The panel must be a minimum of 5/8"
(16) thick.
A115 V AC, 60 Hz, 15 amp fused electrical
supply is required. It is recommended that a
separate circuit, serving only this appliance, be
provided.
The Model UC-24B is equipped with a power
supply cord with a 3-prong grounding plug
which must be plugged into a mating 3-prong
grounding type wall receptacle. The electrical
outlet must be placed so the grounding prong
is to the right of the thinner blades. The
outlet must be flush with the back wall. Locate
electrical within the shaded area shown in the
installation illustration on page 4.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
Refer to the Undercounter Installation
Instructions packed with the appliance, which
provides step-by-step procedures for making
sure the unit is installed properly.

Planning Information
Undercounter Model UC-24B
Dimensions in parentheses are in
millimeters unless otherwise specified. 6
OVERLAY DOOR PANEL
The overlay door panel design allows for a decorative
panel to cover the door trim for a seamless appearance
that will compliment surrounding cabinetry. You may also
choose to match the handle hardware of surrounding
cabinetry.
The overlay door panel applied to the Model UC-24B will
consist of only a frame and will affix directly to the door
with screws through a series of predrilled holes in the
perimeter of the door.
The glass door opening of the Model UC-24B is designed
to be exposed to room air circulation. Decorative overlays
on the glass should be kept to a minimum. Rails and stiles
must be a minimum of 21/4"(57) wide. They can be
increased in size but should not exceed cabinet manufac-
turers’ standard width. Rails and stiles cannot exceed the
overall door panel dimensions specified in the chart below,
as they would interfere with the operation of the door.The
backsides of rails and stiles that will be visible through
the glass door will need to be finished.Also, the inside
edges of the frames must be finished to match the front
surface.
IMPORTANT NOTE: The weight of the door panel cannot
exceed 10 lbs (5 kg).
When planning to install an Undercounter model next to
adjoining cabinetry, you must make provisions to allow the
door to open to a maximum of 145˚ and not hit the door
panel. Refer to the full-scale illustration at the end of this
section.
Refer to the following chart and the OverlayDoor Panel
illustration for panel specifications for Model UC-24B.
OVERLAY PANEL DIMENSIONS
Door Panel Width 23 3/4"(603)
Door Panel Height 301/16"(764)
Width of Rails and Stiles 21/4"(57) min
Door Panel Weight 10 lbs (5 kg) max
Panel Thickness 5/8"(16) min
W
H
Overlay Door Panel
Asolid panel must not be
installed on a glass door unit, as
this may cause moisture to form
behind the panel.

Planning Information
Undercounter Model UC-24B
Dimensions in parentheses are in
millimeters unless otherwise specified. 7
WOOD FACING WINE SHELVES
Sub-Zero has provided a natural cherry wood facing to the
wine shelves in Model UC-24B. If, however, you would like
to replace these strips with wood more complementary to
your design and surrounding cabinetry, you can.
The Wine Shelf Wood Facing illustration on page 9 can be
used as a full-scale template. You must follow the layout
of this format to accommodate the shelves properly. To
remove the cherry strips, take the shelves out and merely
remove the screws.
Reverse the procedure to affix the new wood. If you
choose to stain or seal the wood facing, be aware that
some of these substances are hazardous and will damage
stored wine.
HARDWARE CONSIDERATIONS
When using an Undercounter model in an overlay applica-
tion, you must provide your own handle hardware. It is
recommended you use our optional handles available as
sales accessories. For Model UC-24B/O, use the pre-drilled
holes supplied to locate the handles within the frame of
our unit. The metal frame on the door has numerous
mounting holes on each side to accommodate Sub-Zero
accessory handles. This will allow you to provide the best
possible handle alignment and not takeaway from the
strength of the stile in this area after the unit is used a
number of times. We recommend using a pull handle and
not a pull knob.
If you elect to place different hardware on the Model
UC-24B/O, we encourage you to fasten the hardware by
passing through our door and attach the hardware through
the Sub-Zero door's frame. The other option is to fasten
the handle directly to the overlay panel.
Optional stainless steel handles are available in a variety of
diameters and lengths in the classic stainless steel finish
and polished chrome. Contact your Sub-Zero dealer for
specifics. To obtain local dealer information, visit the
Locator section of our website, subzero.com.
When planning for hardware on
Model UC-24B/O, refer to the
Door Frame Profile full-scale
illustration at the end of this
section to give you a better
understanding of the unit's frame
and positioning of the glass for
the door. You must not drill
through the glass.

Planning Information
Undercounter Model UC-24B
Dimensions in parentheses are in
millimeters unless otherwise specified. 8
FULL-SCALE TEMPLATES
The full-scale illustrations on this page and the following
pages enable you to understand some of the unique situa-
tions you may face as you design the Undercounter units
into homes. These templates can be easily photocopied or
used in your tracings.
DOOR FRAME PROFILE
The full-scale illustration above shows the door frame
profile for Model UC-24B.
IMPORTANT NOTE: Rails and stiles must be a minimum
of 21/4"(57) wide. The back sides of rails and stiles that
will be visible through the glass door will need to be
finished.
Glass
C
L
1" (25)
DOOR FRAME PROFILE
1" (25)
21/4"(57) Rail/Stile
Door Panel Profile
DOOR FRAME PROFILE

Planning Information
Undercounter Model UC-24B
Dimensions in parentheses are in
millimeters unless otherwise specified. 9
191/2"(495)
Maximum Thickness
FRONT VIEW SIDE VIEW
11/2"(38)
5/8"
(16)
7/64"
(3)
5/64"
(2)
23/64"
(9)
9/16"(14)
27/32"
(21)
WINE SHELF WOOD FACING
WINE SHELF WOOD FACING
For Models UC-24B, use the full-scale illustration above as
atemplate if you choose to replace the natural cherry
wood facing with wood more complementary to your
design and surrounding cabinetry.

Planning Information
Undercounter Model UC-24B
10
Dimensions in parentheses are in
millimeters unless otherwise specified.
DOOR PANEL
SUB-ZERO DOOR
145˚*
1
2
(13)
1
4(6)*
1
8(3)
3
4(19)
23 (587)
TO BACK OF
APPLIANCE
1
8
*UNDERCOUNTER
UNIT MUST EXTEND
A MINIMUM 1/4" (6)
BEYOND THE FRONT
SURFACE OF
ADJOINING
CABINETRY TO
ALLOW THE MAXIMUM
DOOR SWING
SUB-ZERO
DOOR
DOOR
PANEL
24 (610)
CABINETRY
OPENING
23 (600)
DOOR PANEL
WIDTH
3
4
DOOR CLOSED AND 145˚ MAX OPENING