SUBADA S7608 User manual
(Model: S7608)
Read this user manual carefully before you use the bottle warmer and save it for future reference
INSTRUCTION MANUAL
BOTTLE & POUCH WARMER
S7608
110V 60Hz, 220V 50Hz
1. To prevent damage to the appliance do not use alkaline cleaning agents when cleaning, use a
soft cloth and a mild detergent.
2. Cleaning and user maintenance shall not be made by children unless the y are aged 14 years
and above and supervised.
3. Keep this appliance and it's cord out of the reach of children.
4. This appliance is not intended for use by persons(including children) with reduced physical，
sensory or mental capabilities，or lack of experience and knowledge，unless they have been
given supervision or instruction concerning the use of the appliance by a person responsible for
their safety.
5. Children do not understand the dangers associated with operating electrical appliances.Never
allow children to use this appliance.
6. The heating element surface is subject to residual heat after use.Do not touch hot surfaces use
handles and knobs.
7. Ensure that the heating guidelines are followed to ensure that the food is not heated for too long.
8. For your child's safety-Always check food temperature before feeding by testing on a sensitive
part of your skin.
9. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions
or has been damaged in any manner.
10. If the supply cord is damaged it must be changed by a qualified person in order to avoid a
hazard.
11. Always use on a dry flat heat resistant kitchen surface.do not move appliance when in use.
12. Do not let the cord hang over edge of kitchen worksurface or touch hot surfaces.
13. Do not use any accessories other than those supplied with this appliance.
14. If the cordis correctly placed in the tidy the product will sit level.Do not start using the product
if it is not sitting level.
15. Regularly check the cord and plug for signs of damage, if visible remove from use immediately.
16.The water inside the unit gets very hot and can cause burns, please take care when removing
items from the food and bottle warmer.
Do not immerse the cord, plug or appliance in water or other liquid.
This appliance is intended to be used in household and similar applications such as: staff
kitchen areas in shops, offices and other working environments; farm houses; by clients in
hotels, motels and other residential type environments; bed and breakfast type environments.
Do not use outdors.
Before plugging in the food and bottle warmer for the first time ensure that the voltage is
compatible with your electricity supply by checking the label on the base of the unit. Ensure
water has been added to the unit before switching the unit on.
Do not immerse in water.
To protect against fire, electric shock and injury to persons do not immerse cord, plugs or other
parts of the unit in water or other liquid.
Misuse of the product may result in the risk of fire, electric shock and/or personal injury. This
appliance can be used by persons aged 14 years and above if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved.
Keep this instruction sheet for future reference as it includes important information.
200W
Check the appropriate voltage to plug in the power supply. The
bottle warmer is stand by when the light is flickering.The
appliance is switched on when the light is lit.
when plug in machine, long press for 2 seconds to enter MUTE
mode, after press the power button, machine will enter into
standby state, it can adjust the temperature or time, it can
change quickly when long press the button.
when plug in machine, long press for 2 seconds to restore the
factory default settings (except for the MUTE setting), after
press the power button, machine will enter into standby state, it
can adjust the temperature or time,it can change quickly when
long press the button.
"FAST" function is for fast heating/thawing, the working time
range can be set: 0.5-8 minutes, product startup: press "FAST"
function, the display screen shows the countdown time, after
the end of the countdown, machine will convert to "Milk"
function automatically, it will show the before default setting
temperature.（60ml milk, heat with MAX line water, 2.5
minutes can reach to 45°C）
Select this mode when you would like to warm a bottle of
milk/water with a temperature range of 37-60 ℃. "Milk" function
is to maintain the setting temperature for a long time.
Select this mode when you would like to warm containerl /jar of
baby food with a temperature range of 45-80℃.
Sterilize the baby bottle/pacifier with steam.
It’s forbidden to continuously start the "FAST" and "Sterilize" function of the
product. Multiple starts will cause over-temperature protection to end the work
in advance. It is recommended to use the machine until the water temperature
drops and then heat or replace the normal water to start the work.
NOTE:
1. Place the bottle or container in the bottle warmer. (Fig.1)
2. Fill the bottle warmer with 80ml distilled water. (Fig.2)
1. Place the bottle or container in the bottle warmer. (Fig.4)
2. Fill the bottle warmer with 80ml distilled water. (Fig.5)
3. Select FAST, the indicator light above will lit. (Fig.3)
At this setting, your are able to defrost/ heat up your frozen/
refrigerated milk/ baby food to liquid/ warmed state with
atimer selection of 2.5-8 minutes.
After this mode is completed, the bottle warmer will beep
five times and automatically turn to 24H constant warmin g
mode at the temperature level you selected last time at
WARM mode.
(Warming time depends on milk volume/ starting temperature/ bottle
material)
NOTE:
1. Due to the high variety of baby food consistencies, it is strongly recommended to
continuously stir and check while you are defrosting the baby food for an optimal result.
2. Note: The milk/ food should not be eaten directly after thawing.
NOTE:
1. SUBADA recommends to feed your baby as soon as possible
after the milk is warmed.We advise not to reheat the milk after it has
cooled down again.
2. Always check the temperature before you feed your baby (Fig.7).
FAST WARMING CONSTANT WARMING SETTING
3. Select MILK, the indicator light above will lit. (Fig. 6)
At this setting, your are able to heat up milk to a desired
temperature level from 37-60 ℃by touching or .
The screen will show real time temperature in degree
Centigrade.
(Before feeding, shake the milk well and even. Please make sure the
temperature is suitable for feeding.The bottle warmer will precisely
keep the milk/ water at the desired temperature for 24 hours to fit
every baby's preference in this mode. lt isnot recommended to warm
breast milk for too long.)
1. Place the food container/ jar (heat-resistant) in the bottle
warmer (Fig.8)
5. Please feed after a warming test with a spoon to ensure
the food is suitable for baby. (Fig.12)
1. Place the milk bottle (bottle mouth down) and pacifier in
the bottle warmer. (Fig.13)
2. Fill the bottle warmer with 30ml distilled water (Fig.14)
2. Fill the bottle warmer with 80ml distilled water (Fig.9)
4. Please remember to stir the food well before feeding.The
food container/ jar can be very hot after using this function,
please be cautious. (Fig. 11)
NOTE:
1. Due to the high variety of baby food consistencies, it is strongly recommended to
continuously stir and check while you are warming the baby food for an optimal result.
2. Due to the high variety of baby food consistencies, it is not possible to indicate
warming timings for baby food.
FOOD WARMING SETTING
STERILIZING
3. Select FOOD, the indicator light above will lit.(Fig.10)
At this setting, your are able to heat up baby food to a
desired temperature level from 45-80 ℃by touching
or .
The screen will show real time temperature in degree
Centigrade.
(The machine will stop working automatically after 2-hour food
warming.)
