Sullivans 38436 User manual

Stowaway Table
INSTRUCTIONS
Item No. 38436SULLIVANS
www.sullivansusa.net
page 1

Part List for Stowaway Table
page 2
Tools needed: Phillips Head screwdriver Assembly time: Approximately 40 minutes
A 1 PC B 1 PC C 1 PC
D 1 PC E 1 PC
F 1 PC
1 20 PCS 2 4 PCS 3 4 PCS 4 4 PCS 5 4 PCS 6 14 PCS
7 10 PCS 8 2 PCS 9 4 PCS 10 4 PCS 11 2 PCS 12 2 PCS
13 2 PCS 14 2 PCS 15 3 PCS 16 1 PC 17 1 PC 18 1 PC 19 1 PC
G 1 PC H 1 PC I 1 PC J 1 PC K 1 PC
L 1 PC M 1 PC N 1 PC
O 2 PCS
P 1 PC
Q 1 PC
48”x 24”
Large Table Top
40”x 20”
Small Table Top
20”x 13-¼”
Bottom Board
11”x 8-¾”
Front Panel
for Drawer
17-½”x 7”
Side Panel
for Drawer
17-½”x 7”
Side Panel
for Drawer
24”x 9-⁄”
Support Frame
⁄” x ⁄”
Screws
¼”x 1-½”
Screws ¼” x 2-½” Screws Cam-bolt Cam-lock Sliders Locking Caster
Caster Caster Handle Open-end
Wrench Allen Key Metal SquareLocking Caster
⁄” x ½”
Screws ⁄” x 2” Screws ¼” x ⁄” Screws ¼” x 1-⁄” Screws ¼” x 1-¼” Screws
29-⁄”x 19-⁄”
Support Frame 29-⁄”x 19-⁄” Support Frame
41-⁄”
Metal Tube
41-⁄”
Metal Tube 24” Metal Tube
7-¹⁄”x 7”
Back Panel
for Drawer
17-¼”x 7-⁄”
Bottom Panel
for Drawer
24-⁄”x 17-⁄”
Support Frame 24-⁄”x 17-⁄” Support Frame 24-⁄”x 17-⁄” Support Frame

page 3
Step 1
Press the plastic locking bar in the drawer Sliders (11) and pull out the track. Screw the track
on to the Support Frames, (I) and (J), and Drawer Side Panels (E) and (F).
Step 2
Use ¼”x 1-½” screws (7) to connect the Support Frames (J) and (K) to (L) and Metal Tube (Q).
Step 3
Use ¼”x 1-¼” screws (6) to connect Support Frames
(I), (J), and (K) to Small Table Top (B). Use ¼”x 1-⁄”
screws (5) to connect Support Frame (I) and (J) to
Bottom Board (C). Use ⁄” x ⁄” screws (1) to install
the Locking Casters (12) and Casters (13) onto Bottom
Board (C). Screw one Locking Caster (14) and one Caster
(15) to Support Frame (K). Then turn the Table Top upwards.

page 4
Step 6
Use ¼”x 1-¼” screws (6) to connect the
Metal Tube (O), Support Frames (M) and
(N) with Large Table Top (A). NOTE: Do not
screw to the end. Then connect Support
Frames (M) and (N) with Metal Tubes (P)
and (O). Lastly, screw all the screws tightly
to the end. Then install one Locking Caster
(14) and two Casters (15) on to Support
Frame (M) and (N). Turn the Table Top
upwards. Insert the round tube on
Support Frame (M) into the round
tube on Table Top (B).
Step 4
Use ¼” x ⁄” screws (4) to connect Metal Square (19)
to corner of Small Table Top (B).
Step 5
Screw Cam-bolt (9) and Handle (16) into Front Panel
(D). Screw Cam-lock (10) into Side Panels (E) and (F),
then insert into Front Panel (D). Insert Bottom Panel
(H) into the grooves of Panels (E), (F), and (D). Use ⁄”
x 2” screws (3) to connect the Back Panel (G) with Side
Panels (E) and (F). Tightly screw Cam-Locks (10) and
put in the drawer.

page 5
Safety & Maintenance
This table is not a toy - do not let children play on, under, or around it. To clean the table, use a
cloth or sponge with mild soap. Never use anything abrasive. Never rest a hot iron directly on
the surface.
Sullivans USA
4341 Middaugh Avenue • Downers Grove, IL • Ph. [phone] • [email protected]
M. T. Sullivan & Co. Pty. Ltd.
40 Parramatta Road • Underwood, Brisbane, Queensland Australia
Sullivans Enterprises (NZ) Ltd.
28 Sir William Avenue • East Tamaki, Auckland New Zealand
Sullivans USA, Inc. will replace any missing or defective parts within 30 days of purchase.
Fax a dated receipt to [phone] or email to [email protected], along with
your request. Some restrictions apply. See website for details.
This policy does not apply to damages due to shipping. For further assistance, please call
toll-free at [phone].

DO NOT RETURN
TO THE STORE
800.862.8586
PLEASE CALL US AT
FOR ASSISTANCE WITH MISSING OR REPLACEMENT
PARTS, INSTALLATION, OR INFORMATION
4341 MIDDAUGH AVENUE • DOWNERS GROVE, IL 60515 • ORDERS: 800.862.8586 • FAX: [phone]
www.sullivansusa.net www.sullivansusa.net