Summerset SSRFR-24DK1 Service manual

KEGERATOR

SUMMERSET KEGERATOR INSTALLATION INSTRUCTIONS
& OWNERS MANUAL
24” 6.6C DELUXE OUTDOOR RATED
SINGLE TAP KEGERATOR
NAME:
SSRFR-24DK1
PART #:
THANK YOU
Thank you for your purchase. We’d like to welcome you to the Summerset family of luxury outdoor
kitchen products and look forward to being a part of your home for years to come. As a family business
with over 30 years of industry experience, we aim to deliver exceptional quality and personal service.
Welcome to the Summerset family and we hope you love your new kegerator!
INSTALLER:
Please leave this manual for the owner
Serial Number:
Model:
Date of Purchase:
Place of Purchase:
To view on your phone, scan the QR code on your smart phone’s
camera app. (For Android devices, use Google Lens.)
For warranty information and to register your kegerator
visit, Summersetgrills.com/register/refrigeration

SAFETY AND INSTALLATION INSTRUCTIONSSAFETY AND INSTALLATION INSTRUCTIONS
1. Child entrapment and suffocation
are not problems of the past. Junked
or abandoned appliances are still
dangerous, even if they will “just sit for
a few days.”
2. Before discarding your old refrigerator:
Take out the drawers.
RISK OF CHILD ENTRAPMENT
WARNING!
1. Stainless steel models exposed to
chlorine gas and moisture such as areas
with spas or swimming pools, may have
some discolorations of the stainless
steel. Discoloration from chlorine gas is
normal.
2. NEVER USE CHLORIDE TO CLEAN
STAINLESS STEEL.
CAUTION!
• Plug into a grounded 3 prong outlet,
do not remove prong, do not use an
adapter and do not use an extension
cord.
• Replace all panels before operating
• It is recommended that a separate circuit
serving only your appliance be provided.
Use receptacles that cannot be turned
off by a switch or pull chain.
• Never clean appliance parts with
flammable fluids. These fumes can
create a fire hazard or explosion.
• Do not store or use gasolines or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
The fumes can create a fire hazard or
explosion.
• Do not connect or disconnect the
electric plug when your hands are wet.
• Unplug the appliance or disconnect
power before cleaning or servicing.
Failure to do so can result in electrical
shock or death.
• Do not aempt to repair or replace
any part or your appliance unless it
is specifically recommended in this
manual. All other servicing should be
referred to a qualified technician.
WARNING!
Most power failures are corrected within a few
hours and should not affect temperature of your
appliance if you minimize the number of times
the drawer is opened. If the power is going to be
off for a longer period of time, you need to take
the proper steps to protect the contents.
Short Vacations: Leave the appliance operating
during vacations of less than three weeks.
Long Vacations: If the appliance will not be used
for several months, remove all items and turn
off the appliance. Clean and dry the interior
thoroughly. To prevent odor and mold growth,
leave the drawer open slightly, blocking it open if
necessary.
• Remove all items.
• Securely tape down all loose items inside
your appliance.
• Turn the adjustable legs up to the base to
avoid damage.
• Tape the drawers shut.
• Be sure the appliance stays secure in the
upright position during transportation. Also
protect the outside of the appliance with a
blanket or similar item.
Before the appliance is used, it must be
properly positioned and installed as described
in this manual, so read the manual carefully.
To reduce the risk of fire, electrical shock or
injury when using the appliance, follow basic
precautions, including the following:
POWER FAILURE
VACATION TIME
MOVING YOUR APPLIANCE

GENERAL SAFETY REQUIREMENTS
• The appliance should be located in the
coolest area of the room or outdoor location,
away from heat producing appliances and
out of direct sunlight.
• Do not overload the beer dispenser as it
forces the compressor to run longer.
• Position items so that air can circulate freely
around them.
• Do not leave door open for longer than
required.
• Make sure items do not touch the back of
the storage compartment.
• Do not set the thermostat to exceedingly
cold temperatures.
ENERGY SAVING TIPS
GENERAL SAFETY REQUIREMENTS
FOLLOW WARNING CALL OUTS BELOW ONLY
WHEN APPLICABLE TO YOUR MODEL
• Use two or more people to move and
install appliance. Failure to do so can
result in back or other injury.
• To ensure proper ventilation for your
appliance, the front of the unit must be
completely unobstructed.
• Choose a well-ventilated area with
temperatures above 50°F (10°C) and
below 109.4°F (43°C).
• The appliance should not be located
next to ovens, grills or other sources of
high heat.
• The appliance must be installed with all
electrical, water and drain connections in
accordance with state and local codes. A
standard electrical supply (115 V AC only,
60HZ), properly grounded in accordance
with the National Electrical Code and
local codes and ordinances is required.
• Do not kink or pinch the power supply
cord of the appliance.
WARNING!
• The size of the fuse (or circuit breaker)
should be 1.3 amperes.
• It is important that the appliance be leveled
in order to work properly. You may need to
make several adjustments to level it.
• All installations must be in accordance with
local plumbing code requirements.
• Never allow children to operate, play with
or crawl inside the appliance.
• Do not use solvent-based cleaning agents
or abrasives on the interior. These cleaners
may damage or discolor the interior.
• Use this appliance only for its intended
purposes as described in this instruction
manual.
• Keep fingers out of the “pinch point”
areas. Clearances between the drawer and
cabinet are necessarily small. Be careful
closing drawer when children are in the
area.

TABLE OF CONTENTS
Before Operating
Troubleshooting
Operating Your Appliance
Installation
Warranty
1
2
3
4
6

1
BEFORE OPERATING
SHIPMENT ARRIVING DAMAGED:
INTERIOR LIGHT
DEFROSTING
TEMPERATURE ALARM
CLEANING AND MAINTENANCE
IMPORTANT NOTES:
VISIBLE DAMAGE
If your shipment arrives with visible damage to
the box/carton, be sure the damage is noted on
the bill of freight or express receipt and signed
by the person making the delivery. File claim for
damages immediately, regardless of the extent
of damage.
Disconnect all power supplies and baeries
before servicing
CONCEALED DAMAGES
If damages are unnoticed until the kegerator is
unpacked, notify the transportation company or
carrier immediately and file a concealed damage
claim with them. This should be done within (5)
days of the delivery date. Be sure to hold on to
the box/carton for inspection. We cannot assume
responsibility for damage or loss incurred in
transit.
CONSTRUCTION ZONES
Keep all stainless steel products away from
construction zones. Construction debris such as
(but not limited to) stone dust, stucco, and lime
dust could damage or permanently discolor
stainless steel products. Keep all caustic chemicals
including chlorine and pool cleaning products
away from stainless steel at all times.
This unit is equipped with an interior LED light
which will be turned ON when the door is open
and the interior fan is stopped at the same time.
You can press to manually turn on or tun off
the light.
The unit defrosts automatically in normal
operating conditions. The evaporator behind the
rear wall of the unit defrosts automatically. The
condensation collects in the drainage channel
behind the rear wall of the unit and flows through
the drainage hole into the drop tray by the
compressor where it evaporates.
However, frost may accumulate on the evaporator
if the unit is repeatedly opened in a high heat or
high humidity location. If this frost paern does
An audible alarm sounds if the storage
temperature is not cold enough. The temperature
display flashes at the same time.
The cause of the temperature being too high may
be:
• Too much warm ambient air flowed in
when rearranging and removing stored
items.
• Power failure for some time.
• The appliance is faulty.
The audible alarm is automatically silenced and
the temperature display stops flashing when the
temperature is sufficiently cold again.
Periodic cleaning and proper maintenance will
ensure efficiency, top performance and long life.
The maintenance intervals listed are based on
normal conditions. You may want to shorten
the intervals if you have pets or other special
considerations.
Exterior cleaning for your stainless steel model.
• Turn off the power, unplug the appliance,
and remove all items including the dispense
kit.
• Wash the inside surfaces with warm water
and baking soda solution. The solution
should be about 2 tablespoons of baking
soda to a quart of water.
• Wring excess water out of the sponge or
cloth when cleaning area of the controls, or
any electrical parts.
• Wash the outside cabinet with warm water
and mild liquid detergent. Rinse and wipe
dry with a clean so cloth.
• Do not use steel wool or a steel brush on
the stainless steel. These will contaminate
the stainless steel with steel particles and
rusting may occur.
• Dust the front grill and back of the unit
twice yearly, make sure the power is off
before cleaning.
• It is recommended to clean the unit
completely inside and out yearly to
maximize the longevity of the product.
ELECTRICAL PARTS AND COMPONENTS
WARNING!
not clear within 24 hours, your unit will require
manual defrosting.
Press and hold for 6 seconds, the unit will be
defrosted.
To stop defrost, please repeat the same
interaction.

2
TROUBLESHOOTING
You can solve many common problems easily, saving you the cost of a possible service call. Try the
suggestions below to see if you can solve the problem before calling the servicer.
PROBLEM SOLUTION
Kegerator does not
operate
Not plugged in or the appliance is turned off.
The circuit breaker tripped or a fuse has blown out.
Kegerator is not cold
enough
Check the temperature control seing.
External environment may require a higher seing.
The door is opened too oen.
The door is not closed completely.
The door gasket is not sealing properly.
Kegerator is turning on
and off frequently
The room temperature is hoer than normal.
The door is opened too oen.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The light does not work Not plugged in.
The circuit breaker tripped or a fuse has blown.
The light bulb has burned out.
The light buon is “OFF”
PROBLEM SOLUTION
Vibrations Check to assure that the kegerator is on a level surface.
The kegerator seems to
make too much noise.
A faint humming noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds
caused by the flow of the refirgerant in your kegerator.
Contraction and expansion of the inside walls may
cause popping and crackling noises.
During the defrosting process you may hear a water
flowing sound cuased by water flowing through the
drain trough.
The kegerator is not on a level surface.
The door will not close
properly
The kegerator is not on a level surface.
The gasket is dirty.
The shelves are out of position.
Smell/Odor Check for leaks on inside surface or around the keg
coupler.
Outer surface of
appliance is wet
Condensation has formed and can be wiped dry.
External surface is warm Compressor is working to transfer heat from inside
the cabinet.
• Remove the exterior and interior packaging,
but do not remove any foam insulation
surrounding the pipes at the back.
• Before connecting the unit to the power
source, let it stand for approximately 24
hours. This will reduce the possibility of
malfunction in the cooling system from
handling during transportation.
• Clean the interior surface with lukewarm
water using a so cloth.
• Place the unit on a flat, solid floor that is
strong enough to support it when it is fully
loaded. To level the appliance, adjust the
rolling casters at the boom of the unit.
• When moving your kegerator, please do not
incline it more than 45 degrees.
• Locate the appliance away from direct
sunlight and sources of heat (stove, heater,
1. Position the unit on a flat, level surface
capable of supporting the entire weight
of the unit. Remember the unit will be
significantly heavier once it is fully loaded.
2. Connect the unit to a Ground Fault
Interrupter (GFI).
3. The unit must be installed according to your
local codes and ordinances.
4. ELECTROCUTION HAZARD!
• Electrical Grounding Required - This
appliance is equipped with a three
prong (grounding) polarized plug for
your protection against possible shock
hazards.
• NEVER remove the round grounding
prong from the plug.
• NEVER use a two prong grounding
adapter.
BEFORE USE:
radiator, etc.). Direct sunlight may affect
the acrylic coating and heat sources may
increase electrical consumption. Extreme
cold ambient temperatures may also
cause the unit to perform improperly. The
optimal ambient temperature range is 50°F
- 109.4°F. Do not mount the dra tower
remotely, as the exposed beer line will not
be refrigerated, causing foam.
• Avoid locating the unit in damp areas.
• Unwind the power cord to its full length and
inspect for damage before plugging into
the outlet.
• Plug the kegerator into an exclusive,
properly installed and grounded wall outlet.
• Do not under any circumstances cut or
remove the third (ground) prong from
the power cord. Any questions concerning
power and/or electrical grounding should
be directed to a certified electrician or
authorized products service center.
• Aer plugging the appliance into a wall
outlet, allow the unit to cool down for 3
to 4 hours before installing a keg in the
appliance.
It is recommended that you install the appliance
in a place where the ambient temperature
is between 50°F and 109.4°F (10°C-43°C). If
the ambient temperature is above or below
recommended temperatures, the performance
of the unit may be affected. For example, placing
your unit in extremely cold or hot conditions
may cause interior temperatures to fluctuate.
The operating temperature range may not be
reached.

3
Put the screws on top of the drawer where the
handle is to be installed. Align the handle with
screws, tighten the screws using the screwdrivers.
ELECTRICAL CONNECTION
Improper use of the grounded plug can
result in the risk of electrical shock. If the
power record is cord is damaged, have it
replaced by a qualified or an authorized
service dealer.
WARNING!
OPERATING YOUR APPLIANCE
Remove the exterior and interior packing.
Before connecting the appliance to the power
source, let it stand upright for approximately
24 hours. This will reduce the possibility of a
malfunction in the cooling system from handling
during transportation.
Clean the interior surface with lukewarm water
using a so cloth.
Install the handle on the drawer if not already
aached.
The Kegerator is able to maintain the proper
dispensing temperature for beer, provided it is
installed correctly in the proper environment. For
best results, mount the dra tower as close to
the top of the kegerator as possible and seal any
openings to prevent heat transfer. Avoid opening
and closing the door of the kegerator too oen
to ensure a consistent temperature inside the
unit. Factory preset temperature is 36 degrees
Fahrenheit.
The Kegerator should be placed in an area where
the ambient temperature range is between 50-
109.4 degrees Fahrenheit (10-43 degrees Celsius).
If the ambient temperature is above or below
this range, the performance of the unit may
be affected. For example, placing your unit in
extreme cold or hot conditions may cause interior
temperatures to fluctuate. Please be aware
that the desired temperatures may fluctuate
depending on the ambient temperature and the
orientation of the keg.
Press first, then press or buon
to increase (warm) or decrease (cool) the set
temperature by 1°C/ 1°F.
Press again, the temperature is selected and
shows the actual temperature. If no other further
operation in 6 seconds, display will show actual
temperature in the cooler
The temperature you are seing will increase by
one degree each time you press the key and
will decrease by one degree each time you press
the key.
The range of temperature control is from 32°F
to 50°F.
To view the set temperature at any time, press
the key. The set temperature will flash in the
display window for 6 seconds. Aer 6 seconds,
the temperature inside the until will reappear in
the display window.
(The temperature preset at the factory is 36°F)
CONTROL PANEL
°F/°C SELECTOR
SETTING THE TEMPERATURE CONTROL
BEFORE USING YOUR APPLIANCE
OPERATION INSTRUCTION
ON/OFF Power
To turn the appliance ON or OFF, press and hold
the POWER key for 5 seconds.
UP and DOWN
SET
SET
Selects the temperature display seing in
Fahrenheit or Celsius degrees. To change the
temperature from Fahrenheit to Celsius or from
Celsius to Fahrenheit, press and at the
same time, then hold for 6 seconds.
SET
SET

4
Then, aach the regulator to the CO2 tank, using an adjustable wrench
to avoid leakage. Place a metal fastener around the neck of the red hose,
and aach the hose to the nozzle of the regulator. Tighten the fastener
using a flathead screwdriver. Place another metal fastener around the
other end of the red hose, and aach to the nozzle on the Keg Coupler.
Tighten the metal fastener. Twist counterclockwise to open the CO2
tank. Unscrew the pressure valve until loose, and then re-screw until the
pressure gauge reads “12”
Locate the translucent hose connected to the Keg Tower, and aach it to
the Keg Coupler. Then, connect the Keg Coupler to your keg by pushing
down and twisting clockwise to lock it in.
Then, guide the translucent hose through the kegerator opening, or
if you have an island, as shown, guide it through both openings. If
mounting to a counter-top, secure your tower using the four long bolts
& nuts, and 2 rubber washers. If mounting directly onto your kegerator,
use the 4 short bolts and metal washers.
INSTALLATION
Unpackage your kegerator and lay out the kegerator parts on a flat
surface, ensuring you have the following:
STEP 1
STEP 2
5. Keg Tower w/Hose
6. Red Hose w/ 2 Fasteners
7. 4 Short Bolts & 4 Metal
Washers
1. CO2 Regulator
2. Keg Coupler
3. Keg Tap & Handle
4. CO2 Tank
8. 4 Long Bolts, 4 nuts &
2 Rubber Washers
9. Tap Tray
10. Keys
1
3
4
6
5
7
8
9
2
Now, screw the tap handle onto the keg tap, and fasten the keg tap to
the tower by rotating counterclockwise.
STEP 3
Place your CO2 tank onto the shelf, and then lift the keg into
the kegerator. Tap your keg by pulling out the black lever of your
keg coupler, pushing down, and releasing. Make sure your keg
completely cools before use. Place the Tap Tray below the tap.
POUR AND ENJOY!
STEP 6
DO NOT PUSH DOWN THE BLACK LEVER ON KEG COUPLER
STEP 4
STEP 5

5
This appliance should be properly grounded for
your safety. The power cord of this appliance is
equipped with a three-prong plug which mates
with a standard three-prong wall outlet to
minimize the possibility of electrical shock.
Do not under any circumstance cut or remove
the third (ground) prong from the power cord
supplied. For personal safety, this appliance must
be properly grounded. Any questions concerning
power and/or grounding should be directed
toward a certified electrician or an authorized
service center.
The appliance requires a standard 115/220 Volt
AC-60HZ three-prong grounded electrical outlet.
Have the wall outlet and circuit checked by a
qualified electrician to make sure they outlet is
properly grounded. When a standard 2-prong
wall outlet is encountered, it is your responsibility
and obligation to have it replaced with a properly
grounded 3-prong wall outlet.
To prevent accidental injury, the cord should
be secured behind the appliance and not le
exposed dangling.
The appliance should always be plugged into
its own individual electrical outlet which has a
voltage rating that matches the rating label on
the appliance. This provides the best performance
and also prevents overloading house wiring
circuits that could cause a fire hazard from over
heating. Never unplug the appliance by puling
on the power cord, always grip the plug firmly
and pull straight out from the receptacle. Repair
or replace immediately all power cords that have
become frayed or otherwise damaged. Do not
use a cord that shows cracks or abrasion damage
along its length or at either end. When moving
the appliance, be careful not to damage the
power cord.
Because of potential safety hazards under certain
conditions, it is strongly recommended that you
do not use an extension cord with this appliance.
However, if you must use an extension cord it is
absolutely necessary that it be a UL/CUL-Listed,
3-wire grounding type appliance extension cord
having a ground type plug and outlet and that
the electrical rating of the cord be 115 volts and at
least 1.3 amperes.
ELECTRICAL CONNECTION CONTINUED EXTENSION CORD
INSTALLATION
This appliance includes a stainless-steel handle
that is not required to operate this unit. To install
the handle please follow the below instructions:
1. Pull away the door gasket in the area where
the handle is to be installed as shown in
illustration. The gasket is easily displaced by
hand, no tools are necessary.
2. Locate the screws included in the bag with
the user’s guide. Insert the screws into the
holes as shown.
3. Align the handle with the screws installed.
Tighten the screws using a Phillips head
screwdriver until the handle sets both flush
and secured tightly against the door frame.
(DO NOT over tighten as this will cause
damage to the handle assembly).
4. Replace the door gasket to its original
Position.
INSTALLING THE STAINLESS STEEL HANDLE

6
WARRANTY:
(3) year warranty on the compressor. (1) year
warranty on all electrical
WARRANTY LIMITATIONS & EXCLUSIONS
This warranty shall apply only to the products
purchased and located in the continental United
States and Canada. The warranty coverage
begins on the original date of purchase and
proof of date of purchase is required. In order to
activate the warranty, we require that you send
in the aached warranty registration card. This
warranty applies only to the original owner and
may not be transferred.
This warranty does not apply to damages
resulting from negligence, alteration, misuse,
abuse, accident, natural disaster, improper
installation or improper operation, unauthorized
adjustments or calibrations, dings, dents,
scratches, or damages due to harsh cleaning
chemicals. This warranty does not apply to
commercial use, or to products with altered or
removed serial numbers. The Manufacturer shall
not be liable for incidental, consequential, special
or contingent damages resulting from its breach.
SUMMERSET REFRIGERATION WARRANTY
WARRANTY SERVICE & REPLACEMENT PARTS:
Call your authorized selling dealer or call
Summerset directly at 800-966-8126
Be prepared to furnish the following information:
Purchaser’s name, model and serial number
of the Power burner, date of purchase and
the accurate description of the problem. The
Manufacturer will not pay for service calls for
correcting an installation problem. Owner shall
be responsible for proper installation, providing
normal care and maintenance, providing proof
of purchase upon request and making the Power
Burner accessible for service.
In the event of any warranty replacement, all
removal, replacement, installation and shipping
costs are the responsibility of the Power Burner
owner.
Some states do not allow limitations on how
long an implied warranty lasts, or the exclusions
of or limitations on consequential damages. This
warranty gives you specific legal rights and you
may have other rights, which vary from state to
state.

ACCESSORIES
Summerset’s full line of stainless steal outdoor kitchen compo-
nents makes sure you have everything you need for the perfect
outdoor kitchen experience. Double-lined construction provides
the extra insulation and resilience needed against the elements,
so closing drawers offer a luxurious feel, and a thicker flange
provides a sturdy, seamless fit and elegant style that will work
with any countertop and island finish.
Summersetgrills.com 17322 Gothard St., Huntington Beach, CA. 92647 800.966.8126
WE MAKE IT ALL
SINKS AND BAR PREP
Take your outdoor kitchen to the next level with our sinks
and ice chests. The Summerset Beverage Center is complete
with an ice compartment, sink, towel holder, speed rail with
condiment tray, LED lights, and a built-in bole opener. When
you’re grilling, we want to make sure you have everything you
need conveniently on hand.
Summerset Professional Grills strives to meet every outdoor living expression. We offer a wide
range of products from grills, refrigeration, sinks, accessories and more. Our goal is to ensure
you have everything you need to create your perfect outdoor atmosphere. No maer the style
or budget, Summerset will deliver an experience that will help create the ultimate backyard
getaway.
We are a family owned and operated business that is located in beautiful Huntington Beach, California. We pride
ourselves in using only the best materials, and our commitment to quality is reflected in the crasmanship of
the entire Summerset line of barbecue Power Burners, components, and more. With over 20 years of leadership
in branding and manufacturing, our core focus is to provide exceptional customer service with an unparalleled
warranty.
GRILLS
Summerset Professional Grills offers a complete line of
commercial grade stainless steel Power Burners, Power Burner
carts, power burners, and side burners for any style, use, or
budget. Whether you’re looking for a simple, clean, entry-level
grill, or a heavy-duty grill that supports charcoal, lump coal,
and wood chunks, we have it all.