Summit VC60D User manual

INTEGRATED WINE CELLARS
Model VC28S Model VC60D
INSTRUCTION MANUAL
Please read this manual carefully before installing and starting up, and store
it in a safe place.
Write Serial Number here:
________________________
Felix Storch, Inc.
Summit Appliance Division
770 Garrison Avenue
Bronx, New York 10474
Tel.: [phone]
Fax: [phone]
www.summitappliance.com

TABLE OF CONTENTS
IMPORTANT SAFEGUARDS ................................................................................ 2 - 3
DISPOSAL ............................................................................................................... 3
PRODUCT FEATURES .............................................................................................. 4
INSTALLATION ...................................................................................................5 – 8
Before using your wine cellar ................................................................ 5
Installation of your wine cellar .............................................................. 5
Fully integrated built-in-column installation .......................................... 6
Electrical connection .............................................................................. 7
Extension cord ....................................................................................... 7
Installing the handle .............................................................................. 8
Reversing the door hinge ....................................................................... 8
OPERATING YOUR WINE CELLAR ....................................................................9 – 16
Use and control  single zone ..........................................................9 – 10
Use and control  dual zone ..........................................................10 – 12
Temperature display ............................................................................ 12
Temperature memory function ........................................................... 12
Temperature alarm .............................................................................. 12
Door alarm ........................................................................................... 12
Interior light .................................................................................. 12 - 13
Dynamic climate / Silent mode ............................................................ 13
Sabbath mode ...................................................................................... 13
Cabinet shelves .................................................................................... 13
Defrosting / Humidity / Ventilation ..................................................... 14
Bottle storage ...................................................................................... 14
Wine serving temperature chart .......................................................... 15
Important information about temperature ......................................... 15
Notes on wine storage ......................................................................... 16
CARE AND MAINTENANCE ............................................................................17 – 18
Removing shelves ................................................................................ 17
Cleaning your wine cellar ..................................................................... 17
Power failure .................................................................................17 – 18
Vacation tine ........................................................................................ 18
Moving your wine cellar ....................................................................... 18
Energy saving tips ................................................................................ 18
PROBLEMS WITH YOUR WINE CELLAR .......................................................... 19 - 20
LIMITED WARRANTY ............................................................................................ 23
1

IMPORTANT SAFEGUARDS
When using an electrical appliance, basic
precautions should always be followed.
Read all instructions carefully, even if
you are already familiar with the
appliance.
General Safety
Before the appliance is used, it must be
properly positioned and installed as
described in this manual, so read the
manual carefully. To reduce the risk of
fire, electric shock, or injury when using
the appliance, follow basic precautions,
including the following:
•Plug into a grounded 3-prong outlet.
Do not remove grounding prong, do
not use an adapter, and do not use an
extension cord.
•A separate circuit serving only your
appliance must be provided. Use
receptacles that cannot be turned off
by a switch or pull chain.
•Never clean appliance parts with
flammable fluids. These fumes can
create a fire hazard or explosion. And
do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
The fumes can create a fire hazard or
explosion.
•Before proceeding with cleaning and
maintenance operations, make sure
the power line of the unit is
disconnected.
•Do not connect or disconnect the
electric plug when your hands are
wet.
•Unplug the appliance or
disconnect power before cleaning
or servicing. Failure to do so can
result in electrical shock or death.
•Do not attempt to repair or
replace any part of your
appliance unless it is specifically
recommended in this manual. All
other servicing should be referred
to a qualified technician.
•Replace all panels after service
before operating.
•The appliance is intended to be
used for the storage of wine.
•Use two or more people to move
and install the appliance. Failure
to do so can result in back or
other injury.
•Do not store or install the
appliance outdoors.
•To ensure proper ventilation for
your appliance, the front of the
unit must be completely
unobstructed. Choose a well-
ventilated area with
temperatures above 60°F (16°C)
and below 90°F (32°C). This unit
must be installed in an area
protected from the elements,
such as wind, rain, water spray or
drips.
•The appliance must be installed
with all electrical, water and drain
connections in accordance with
2

state and local codes. A standard
electrical supply (115V AC only, 60
Hz), properly grounded in accordance
with the National Electrical Code and
local codes and ordinances, is
required.
•Do not kink or pinch the power supply
cord of the appliance.
•The size of the fuse (or circuit breaker)
should be 15 amperes.
•Never allow children to operate, play
with or crawl inside the appliance.
•Do not use solvent-based cleaning
agents or abrasives on the interior.
These cleaners may damage or
discolor the interior.
•Use this appliance only for its
intended purpose as described in this
manual.
•Keep fingers out of the “pinch point”
areas. Clearances between the door
and cabinet are necessarily small. Be
careful closing the door when children
are in the area.
•If your model requires defrosting,
never use an ice pick or other sharp
instrument to help speed up
defrosting. These instruments can
puncture the inner lining or damage
the cooling unit. Never use an
appliance with a damaged refrigerant
circuit.
•Do not use mechanical devices or
other means to accelerate the
defrosting process, other than those
recommended by the manufacturer.
•Keep ventilation openings, in the
appliance enclosure or in the built-in
structure, clear of obstruction.
•If you have a lockable appliance,
do not keep the key near the
appliance or within reach of
children.
Disposal
Dispose of your appliance packaging
properly. Ensure that any plastic
wrappings, bags, etc. are disposed
of safely and kept out of the reach
of babies and young children.
Danger of suffocation!
Refrigeration equipment must be
properly disposed of in a
professional and appropriate way,
in accordance with the current local
regulations and laws which protect
the environment. This applies to
your old appliance and to your new
unit once it has reached the end of
its service life.
Risk of child entrapment!
Child entrapment and suffocation
are not just problems of the past.
Junked or abandoned appliances
are still dangerous, even if they will
“just sit for a few days”.
Before discarding your old
refrigerator:
•Take off the doors.
•Leave the shelves in place so that
children may not easily climb
inside.
SAVE THESE INSTRUCTIONS
3

PRODUCT FEATURES
•Built-in (integrated) installation
with single (VC28S) or dual
(VC60D) temperature zone.
•Continuously variable electronic
temperature control with digital
display and touchpad input.
•Temperature can be set from 41°
to 72°F (5° to 22°C) for either
compartment and can be
displayed in either Fahrenheit or
Celsius degrees.
•Can be set at a long time storage
maturing temperature or at a
specific serving temperature for
red/white/sparkling wines.
•Cools and heats to maintain the
perfect storage and/or service
condition.
•Dynamic compressor cooling to
ensure interior air circulation
with even distribution of
temperature and humidity.
•Soft white LED Interior Light with
ON/OFF switch – Function and
Showcase modes.
•Open-door and temperature
warning system.
•Sabbath mode allows the lights
to remain off during certain
religious observances.
•Temperature memory function -
If power is interrupted (power
surge, breaker switch, etc.) and
then powered up again, the unit
will operate with the last
temperature set-point.
•Automatic defrosting with
defrost water evaporation.
•Reversible tempered smoked
glass door protects your wine
from UV light and creates an
attractive display with little
condensation and low noise.
•Black coated matte steel outer
frame and black plastic interior
liner offer lifetime performance
and stability. The black liner
prevents excessive light from
interfering with the maturing
process.
•Seamless stainless steel-framed
glass door with stainless steel
handle.
•Roll-out, adjustable solid
varnished beech shelves allow
for maximum convenience and
flexibility to accommodate
various size bottles.
5
4

INSTALLATION
BEFORE USING YOUR WINE CELLAR
1. Remove all exterior and interior
packing. Clean the interior
surface with lukewarm water
using a soft cloth. The unit may
have residual odors at first, they
will disappear as the unit cools.
2. Before connecting the Wine
Cellar to the power source, let it
stand upright for at least 2 hours.
This will reduce the possibility of
a malfunction in the cooling
system caused by handling during
transportation.
3. The door on this appliance can be
opened from either the left or
the right side. The unit is
delivered with the door opening
on the left side. Should you wish
to open the door from the right,
follow the instructions “Reversing
the door hinge” on page 8.
4. Install the handle on the door if
necessary.
INSTALLATION OF YOUR WINE CELLAR
1. This appliance is only designed to
be built-in (integrated).
Warning: Do not store or install
the appliance outdoors.
2. Place your appliance on a surface
that is strong enough to support
it when fully loaded.
3. For built-in installation, it is a
must to keep 5mm (0.2”) of
space on each side and at the top
and 50mm (2”) at the rear to
ensure proper service access and
ventilation. Take care that the
bottom of the appliance is not
blocked in any way so that air
circulation can occur freely.
4. Locate the unit away from direct
sunlight and sources of heat
(stove, heater, radiator, etc.).
Direct sunlight may affect the
finish and heat sources may
increase electrical consumption.
Extremely cold ambient
temperatures may also cause the
unit not to perform properly.
5. Avoid locating the unit in damp
areas.
6. Plug the unit into an exclusive,
easily accessible plug socket. Any
questions concerning power
and/or grounding should be
directed towards a qualified
electrician or an authorized
products service center.
7. The appliance must be installed
to all electrical, plumbing, water
and drain connections in
accordance with state and local
codes.
8. IMPORTANT: High Humidity Climate
During periods of high humidity,
some condensation may appear
on the outside surface of the
glass door. This condensation will
disappear when humidity levels
drop. For prevention, it is
advisable to install the appliance
with sufficient ventilation in a dry
and/or an air-conditioned place.
Note:Make sure that the socket
and ON/OFF switch are easily
accessible after the appliance
has been installed.
5

FULLY INTEGRATED BUILT-IN-COLUMN
INSTALLATION
The wine cellar door seals the
installed unit almost completely, so
an air vent must be provided in the
base of the housing. Warmed air
must be conducted via the
ventilation shaft to the rear wall of
the housing and then expelled
upwards. The ventilation channels
should measure at least 31 in2(200
square centimeters) in cross-
section.
Model A BC
VC28S
17.36”
(44.1cm)
17.91”
(45.5cm)
17.72”
(45cm)
VC60D
34.29”
(87.1cm)
34.84”
(88.5cm)
34.37-34.57”
(87.3-87.8cm)
Warning: To ensure the proper
functioning of the appliance, air
vents should never be blocked or
covered.
6

ELECTRICAL CONNECTION
Warning: Improper use of the grounded
plug can result in the risk of electrical
shock. If the power cord is damaged,
have it replaced by a qualified
electrician or an authorized service
center.
This appliance should be properly
grounded for your safety. The power
cord is equipped with a three-prong
plug which mates with standard three-
prong wall outlets to minimize the
possibility of electrical shock.
Do not under any circumstances cut or
remove the third (ground) prong from
the power cord supplied.
All electrical work should be carried out
by a suitably qualified and competent
person in accordance with local and
national safety regulations.
Check that the voltage marked on
the product corresponds with your
supply voltage.
This appliance requires a standard
115/120V AC ~ 60Hz three-prong
grounded electrical outlet. Have the
wall outlet and circuit checked by a
qualified electrician to make sure the
outlet is properly grounded. When a
standard 2-prong wall outlet is
encountered, it is your responsibility
to have it replaced with a properly
grounded 3-prong wall outlet.
The appliance must not be used with a
plug adapter as these can cause damage
to the appliance’s electronic unit.
The cord should be placed securely
behind the appliance and should
not be allowed to lie or hang
unprotected.
The appliance should always be
plugged into its own individual
electrical outlet which has a voltage
rating that matches the rating label
on the appliance. This provides the
best performance and also prevents
overloading house wiring circuits
that could cause a fire hazard from
overheating. Never unplug the
appliance by pulling on the power
cord. Always grip the plug firmly and
pull straight out from the receptacle.
Repair or replace immediately all
power cords that have become
frayed or otherwise damaged. Do
not use a cord that shows cracks or
abrasion damage along its length or
at either end. When moving the
appliance, be careful not to damage
the power cord.
Warning:
THIS APPLIANCE MUST BE GROUNDED.
EXTENSION CORD
Because of potential safety hazards
under certain condition, it is strongly
recommended that you do not use
an extension cord with this
appliance. However, if you must use
an extension cord, it is absolutely
necessary that it be a UL/CUL-Listed,
3-wire grounding type plug and
outlet and that the electrical rating
of the cord be 115 volts and at least
10 amperes.
7

INSTALLING THE HANDLE
IMPORTANT: Do not over-tighten the
screws and do not use power
tools to install the handle.
Locate the handle (1) over the pins
(3) of the door and tighten the
handle by screwing the Allen key
grub screws (2).
REVERSING THE DOOR HINGE
It is possible to reverse the door
on this appliance, if required.
To do so, follow the steps below:
Note: All parts must be saved for
reinstallation of the door.
1. Remove the glass door by
unscrewing the eight lock
screws (3) and (4). Be careful to
hold the glass door firmly after
removing the screws and place
it on a padded surface to avoid
the risk of damage.
2. Unscrew and transfer the door
supporter (2) to the opposite side.
3. Rotate the glass door 180° and refit
the glass door to the opposite side.
Then screw and tighten it after the
door is leveled.
4. Remove the handle from the left side
of the door and install it on the right
side.
1
2
3
8

OPERATING YOUR
WINE CELLAR
This appliance is designed for operation
at certain ambient temperatures. The
climate class is specified on the rating
plate.
The appliance may not work properly if it
is left for a long period at a temperature
outside the specified range. For example,
placing your unit in extremely cold or hot
conditions may cause interior
temperatures to fluctuate. The range
between 41°F and 72°F (5°C and 22°C)
may not be reached.
Climate class
Ambient room temperatures
SN
50°F to 90°F (10°C to 32°C)
N
61°F to 90°F (16°C to 32°C)
ST
64°F to 100°F (18°C to 38°C)
T
64°F to 109°F (18°C to 43°C)
Notes:
•When you use the Wine Cellar for the
first time or restart the Wine Cellar after
having been shut off for a long time,
there could be a few degrees difference
between the temperature you select and
the one indicated on the LED readout.
This is normal and is due to the length of
the activation time. Once the Wine
Cooler has been running for a few hours
everything will be back to normal.
•If the unit is unplugged, power lost, or
turned off, you must wait 3 to 5 minutes
before restarting the unit. If you attempt
to restart before this time delay, the unit
will not start.
USE AND CONTROL – SINGLE
ZONE
The Controls of Your VC28S Wine
Cellar
Power
To turn the appliance on/off,
press and hold the key for 5
seconds.
Note: Pressing the key once
can switch off the audible
alarm when the alarm is on.
Light
To turn the inner light on/off.
Up
Used to increase (warm) the set
temperature by 1°C/1°F.
Down
Used to decrease (cool) the set
temperature by 1°C/1°F.
Display
Displays the digital temperature
and service indicators.
Indicator Light
The indicator light is located at
the left lower corner of the
display. The indicator light will be
on when the multi-key function is
selected. To perform the multi-
key function, press and hold the
9

first key, then press the second key
the required number of times and
then release both keys.
°F/°C Selector
Select the temperature display setting in
Fahrenheit or Celsius degrees. To change
the temperature from Fahrenheit to
Celsius or from Celsius to Fahrenheit,
press and hold the Light key for 5
seconds.
Setting the Temperature Control
•The VC28S has a single temperature
zone. The temperature can be set
between 41°F and 72°F (5°C and
22°C) which is ideal for storing red,
white or sparkling wine.
•When the unit is plugged in for the
first time, the unit will power up
automatically to the preset defaults.
The temperature preset at the factory
is 12°C/54°F.
•You can set the temperature as
required by pressing the Up or Down
key. When you press either key the
first time, the display will show the
last temperature set previously. The
temperature will increase 1°C/1°F if
you press the Up key once, and will
decrease 1°C/1°F if you press the
DOWN key once. The display flashes
while you make the setting.
•After the temperature has been set,
the display shows the current inner
temperature.
•To view the set temperature at any
time, press the Up or Down key. The
set temperature will temporarily
flash on the display for 5
seconds. Then the display shows
the current inner temperature
again.
USE AND CONTROL – DUAL ZONE
The Controls of Your VC60D Wine Cellar
Power
To turn the appliance on/off, press
and hold the key for 5 seconds.
Note: Pressing the key once can
switch off the audible alarm
when the alarm is on.
Up
Used to increase (warm) the set
temperature by 1°C/1°F.
Down
Used to decrease (cool) the set
temperature by 1°C/1°F.
Light
To turn the inner light on/off.
10

Display
Digitally displays the temperature
and service indicators.
is for Upper temperature zone and
is for Lower temperature zone.
Indicator Light
The indicator light is located at the left
lower corner of the display. The
indicator light will be on when the multi-
key function is selected. To perform the
multi-key function, press and hold the
first key, then press the second key the
required number of times and then
release both keys.
°F/°C Selector
Select the temperature display setting in
Fahrenheit or Celsius degrees. To
change the temperature from
Fahrenheit to Celsius or from Celsius to
Fahrenheit, press and hold the Light key
for 5 seconds.
Setting the Temperature Control
The unit has two separate temperature
zones. The temperature of both zones
can be set between 41°F and 72°F (5°C
and 22°C). The Lower temperature zone
is ideal for storing red wine at a setting
of 55°F to 72°F (13°C to 22°C). The
Upper temperature zone is suitable for
storing champagne and white wine at a
setting of 41°F to 55°F (5°C to 13°C).
•When the unit is plugged in for the
first time, it will power up
automatically to the preset defaults.
The preset temperature at the factory
for the Upper temperature zone
is 10°C/50°F and for the Lower
temperature zone is 16°C/60°F.
•You can press the left side Up and
Down keys to control the internal
temperature of the Upper
temperature zone and press the
right side Up and Down keys to
control the internal temperature
of the Lower temperature zone.
When you press either key the
first time, the display will show
the last temperature set
previously.
Note: The temperature set for
the Lower temperature zone
must always be just as high or
higher than that in the Upper
temperature zone. For optimal
performance, the set
temperature of the two zones
should differ by at least 7F°
(4C°).
•The temperature that you desire
to set will increase 1°C or 1°F if
you press the Up mark once. On
the other hand, the temperature
will decrease 1°C or 1°F if you
press the Down mark once. The
display flashes while you make
the setting.
•After the temperature has been
set, the display shows the
current inner temperature of the
particular temperature zone.
•To view the set temperature at
any time, press the UP or Down
key. The set temperature will
11

flash in the display for 5 seconds.
Afterwards, the display will show the
current inner temperature again.
TEMPERATURE DISPLAY
During normal operation, the
temperature display on the control panel
shows the temperature inside the
appliance.
The temperature display will flash if
-A different temperature is being set,
-The temperature in the zone deviates
by more than 9F°(5C°) from the set
temperature.
The flashing of the temperature display
ensures that the temperature can not
rise or fall unnoticed and damage the
wine.
TEMPERATURE MEMORY FUNCTION
In the event of a power interruption
(power surge, breaker switch, etc.), the
unit can remember the previous
temperature settings, and when the
power is recovered, the cabinet
temperature will return to the same
temperature setting as before the power
went off.
TEMPERATURE ALARM
An alarm will sound if the temperature in
one of the zones rises or falls outside the
temperature range. The relevant
temperature display will flash at the
same time.
The temperature the appliance is set at
determines the temperature the
appliance recognizes as being too
warm or too cool.
The alarm will sound and the
temperature display will flash:
-When you switch the appliance
on, if the temperature inside the
appliance is very different from
the set temperature.
-When there has been a lengthy
interruption to the power supply.
-When too many items have been
put into the unit at one time.
-When the door has not been
closed tightly.
DOOR ALARM
If the door has been left open for
more than 60 seconds, the alarm
will sound.
Once the set temperature has
been reached in the appliance,
the alarm stops and the relevant
temperature display stops
flashing. However, if the noise
disturbs you, you can switch the
alarm off before this if you wish
by pressing the Power key once.
The alarm will stop. The relevant
temperature display continues to
flash until the set temperature
has been reached. The display
then lights up steadily, and the
alarm system is fully active again.
INTERIOR LIGHT
The interior light makes it easy to
view your wine labels and
enhances the display of your
collection. Touching the Light
12

mark toggles between 2 modes of
operation for the internal lights:
functional (default) mode and
showcase mode. If you are in
functional (default) mode, the lights
will turn on only when the door is
open. If you are in showcase mode,
the lights will be on whether or not
the door is open.
DYNAMIC CLIMATE / SILENT MODE
The Dynamic Climate mode enables
the relative humidity inside the unit
and the temperature to be distributed
evenly around the interior so you can
store all your wine under exactly the
same excellent conditions. If you
would like to use the unit to store
wine long term, the Dynamic Climate
mode is a must. This will create a
continuous climate in the cabinet
which imitates that of a wine cellar.
In the Dynamic Climate mode, the
interior fan circulates the inside air
evenly even after the set temperature
is reached. Dynamic Climate mode is
the factory preset mode, creating a
soft whirring sound. To change to
Silent mode, touch and hold the Up
key for approximately five seconds.
The wine cooler will beep three times
to confirm Silent mode is on. To
change back to Dynamic Climate
mode, touch and hold the Down key
for approximately five seconds. The
wine cooler will beep five times to
confirm Dynamic Climate mode is on.
SABBATH MODE
Sabbath mode is available for the
observance of certain religious
holidays. This mode turns off the
displays, interior light and audible
alarms and prevents them from
turning on again. Normal cooling
operations will still take place.
To initiate Sabbath mode, press
the Power and Light keys at the
same time for at least 5 seconds.
The indicator light will flash four
times and confirm the Sabbath
mode is ON.
Sabbath mode can be exited by
repeating the above process. The
Sabbath Mode will automatically
turn off after 96 hours.
CABINET SHELVES
IMPORTANT - Do not cover any
part of the shelves with
aluminum foil or any other
material that will prevent
adequate air circulation within
the cabinet.
•To prevent damaging the door
gasket, make sure the door is
fully open when pulling shelves
out of the rail compartment.
•For easy access to the stored
bottles, pull the shelves out
approximately 1/3. The shelves
are designed with an
emergency stop to prevent
them being removed too far
when loaded.
13

DEFROSTING / HUMIDITY /
VENTILATION
Your wine cellar is designed with an
automatic defrost system. During “Off-
cycle”, the evaporator behind the rear
wall of the unit defrosts automatically.
The condensate collects in the drain
trough behind the rear wall of the
unit, and flows through the drainage
hole into the drip tray by/above the
compressor. The heat is transferred
from the discharge pipe or compressor
and evaporates any condensation that
has collected in the tray. Part of the
remaining water is collected within the
wine cellar for humidity purposes.
This system enables the creation of
the correct humidity level inside your
wine cellar required by natural cork to
maintain a long-lasting seal.
The wine cellar is not totally sealed: fresh
air admission is permitted through the
drainpipe. Air is circulated through the
cellar by means of a fan/fans and the
slotted shelves.
NOTE: However, frost may accumulate
on the evaporator if the unit is
repeatedly opened in a high heat or
high humidity location. If this frost
pattern does not clear within 24 hours,
your unit will require manual
defrosting.
BOTTLE STORAGE
Bottles differ in size and dimensions. As
such, the actual number of bottles you
may be able to store can vary.
Stated bottle capacities are approximate
maximums when storing traditional
Bordeaux 750-ml bottles and
include bulk storage.
You may load your wine bottles in
single row or by stacking while
taking note of the following: if you
do not have enough bottles to fill
your wine cellar, it is better to
distribute the load throughout the
wine cellar so as to avoid “all on
top” or “all below” type loads.
Remove or relocate adjustable
wooden shelves to accommodate
larger type of bottles or increase
the capacity of the cellar by stacking
the bottles up when necessary. (See
“Removing Shelves”.)
•Keep small gaps between the
walls and the bottles to allow air
to circulate. As in an underground
cellar, air circulation is important
to prevent the growth of mold
and to achieve a more
homogeneous temperature
within the cellar.
•To facilitate air circulation, do not
overload your wine cellar.
•Avoid obstructing the internal
fans (located inside on the back
panel of the wine cellar).
•To prevent bottles from falling,
do not try to slide the shelves
outward beyond the fixed
position.
•Do not pull out more than one
loaded shelf at a time as this may
cause the wine cellar to tilt
forward if not properly installed.
14

WINE SERVING TEMPERATURE CHART
The chart below indicates the best
temperature for drinking purposes.
Wine Style
°C
°F
Champagne NV, Sparkling,
6
43
Spumante
Dry White Semillon, Sauvignon
8
46
Blanc
Champagne Vintage
10
50
Dry White Chardonnay
10
50
Dry White Gewürztraminer,
10
50
Riesling, Pinot grigio
Sweet White Sauternes,
Barsac, Montbazillac, Ice Wine,
10
50
Late Harvest
Beaujolais
13
55
Sweet White Vintage:
14
57
Sauternes
White Vintage Chardonnay
14
57
Red Pinot Noir
16
61
Red Grenache, Syrah
16
61
Red Vintage Pinot Noir
18
65
Cabernet & Merlot: French,
Australian, New Zealand,
20
68
Chilean, Italian, Spanish,
Californian, Argentinean
Room
Vintage Bordeaux
temperature
not exceeding
20°C/68°F
IMPORTANT INFORMATION
ABOUT TEMPERATURE
Your wine cellar has been designed
to guarantee optimum conditions
for storing and/or serving your
wines.
Fine wines require long and gentle
development and need specific
conditions in which to reach their
full potential.
All wines mature at the same
temperature, which is a constant
temperature set between 11°C to
14°C. Only the temperature of
“dégustation” (wine appreciation)
varies according to the type of wine
(see “Wine Serving Temperature
Chart” on the previous page). This
being said and as it is for natural
cellars used by wine producers for
long period of storage, it is not the
exact temperature that is
important, but its consistency. In
other words, as long as the
temperature of your wine cellar is
constant (between 11°C to 14°C, or
52°F to 57°F) your wines will be
stored under perfect conditions.
Not all wines will improve over the
years. Some should be consumed at
an early stage (2 to 3 years) while
others have tremendous ageing
capability (50 years and over). All
wines have a peak of maturity.
Check with your wine merchant to
get the relevant information.
15

NOTES ON WINE STORAGE
•Only store wine in unopened bottles.
Always lay bottles on their side for
storage.
•Do not overload the cabinet.
•Do not open the door unless
necessary.
•Do not cover shelves with aluminum
foil or any other shelf material which
may prevent air circulation.
•If the wine cooler is to be left empty
for long periods, unplug the appliance
and after careful cleaning, leave the
door ajar to allow air to circulate
inside the cabinet in order to reduce
the possible formation of
condensation, mold or odors.
16

CARE AND MAINTENANCE
Warning: Failure to unplug the appliance
during service and cleaning could result
in electrical shock or other personal
injury.
REMOVING SHELVES
•To remove any of the shelves from the
rail compartment, move the shelf to
the position where the notch of the
wooden shelf is exactly under the
plastic post and then lift it up and out.
•In order to replace the shelf, repeat
the steps described above in reverse.
And make sure to engage the shelves
with the small pegs of the extended
rails when the model is equipped with
a roller system.
CLEANING YOUR WINE CELLAR
•Turn off the power, unplug the
appliance and remove all items,
including shelves/racks.
•Wash the inside surfaces with a warm
water and baking soda solution. The
solution should be about 2
tablespoons of baking soda to a pint
of water.
•Wash the shelves with a mild
detergent solution.
•Wring excess water out of the
sponge or cloth when cleaning any
area of the controls.
•Wash the outside cabinet with
warm water and mild liquid
detergent. Rinse well and wipe
dry with a clean soft cloth.
•Do not clean the stainless
steel with steel wool pads.
Instead, use an all-in-one
stainless steel cleaner to
clean the stainless steel.
Always wipe in the
direction of the grain.
POWER FAILURE
•In the event of a power
interruption, all previous
temperature settings are
automatically memorized. If
power is interrupted (power
surge, breaker switch, etc.)
and then powered up again,
the unit will operate with the
last temperature set-point.
•Most power failures are
corrected within a few hours
and should not affect the
temperature of your
appliance if you minimize
the number of times the
door is opened. If the power
is going to be off for a longer
period of time, you need to
take the proper steps to
protect the contents.
Note: Irrespective of the cause,
if you notice either abnormal
temperature or humidity
levels inside your wine cellar,
be reassured that only long
17

and frequent exposure to these
abnormal conditions can cause a
detrimental effect on your wines.
VACATION TIME
•Short holidays: Leave the Wine
Cellar in operation for holidays
of less than three weeks.
•Long absences: If the appliance will
not be used for several months,
remove all items, turn off the
appliance and unplug. Clean and dry
the interior thoroughly. To prevent
odor and mold growth, leave the
door open slightly, blocking it open
if necessary.
MOVING YOUR WINE CELLAR
•Remove all items.
•Securely tape down all loose items
(shelves) inside your appliance.
•Tape the door shut.
•Be sure the appliance stays secure in
the upright position during
transportation. Also protect the
outside of the appliance with a
blanket or similar item.
ENERGY SAVING TIPS
•The wine cellar should be located in
the coolest area of the room, away
from heat-producing appliances and
out of the direct sunlight.
•Ensure that the unit is adequately
ventilated. Never cover air vents.
Clean dust and dirt from the
condenser at regular intervals.
•Do not keep the door open longer
than necessary.
•Store contents in an organized
way.
•To allow air to circulate, do
not overfill the appliance.
18

PROBLEMS WITH YOUR WINE CELLAR
You can solve many common Wine Cellar problems easily, saving you the cost of
a possible service call. Try the suggestions below to see if you can solve the
problem before calling customer service.
Troubleshooting Guide
PROBLEM POSSIBLE CAUSE REMEDY
Appliance does not
operate.
•Appliance is not connected to a power
supply.
•The appliance is turned off.
•Tripped circuit breaker or blown fuse.
•Connect the appliance.
•Switch on the appliance.
•Switch on circuit breaker or
replace fuse.
Appliance is not cold
enough.
•The temperature is not set correctly.
•The ambient temperature could
require a higher temperature setting.
•The door was opened too often.
•The door was not closed completely.
•Door is not hermetically sealed.
•The condenser is dirty.
•The ventilation opening is blocked or
too dusty.
•Check the set temperature.
•Set a higher temperature.
•Do not open the door more
often than necessary.
•Close door properly.
•Check the door seal and
clean or replace.
•Clean the condenser when
necessary.
•Clear the obstructions and
clean the dust.
Appliance turns itself
on and off frequently.
•The room temperature is higher than
average.
•A large number of bottles has been
added to the unit.
•The door is opened too often.
•The door is not closed completely.
•The door gasket does not seal
properly.
•Put the appliance in a cooler
place.
•Leave the appliance to work
for a while until the set
temperature has been
reached.
•Do not open the door more
often than necessary.
•Close the door properly.
•Check the door seal and
clean or replace.
The light does not
work.
•Appliance is not connected to a power
supply.
•Tripped circuit breaker or blown fuse.
•The light was switched off at the
control panel.
•Connect the appliance.
•Switch on circuit breaker or
replace fuse.
•Switch on the light.
Vibrations
•The appliance is not level.
•Level appliance with the
adjustable feet.
The appliance seems
to make too much
noise.
•
A rattling noise may come from the flow of refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds caused by the flow of
refrigerant in your appliance. If temperature fluctuations occur, the
contraction and expansion of the inner walls may cause popping and
cracking noises.
•The appliance has not been leveled properly.
19