
Fiber Optic Solutions Provider 1/4
www.suntelecom.cn • +86-21-60138638 • ics@suntelecom.cn
1 Brief Introduction
1.1 Fiber End Face Inspector Introduction
Fiber end face inspector is the masterpiece of our engineer which with
excellent performance and convenient operability, trust it is the best choice
for fiber end face inspection.
Taking use of 220k pixel of TFT sharp and finely LCD, which magnify about
200 times of object, it makes you easier to judge the status of fiber end face.
And it's compact size made it ideal tool of connector end face inspection
before fiber network installation, varies of adapters meet different
requirements on inspect male fiber connectors & female fiber connectors,
such as FC SC ST E2000 LC MU and TOSA ROSAfiber end face.
It keeps working about 6 hours with 12V re-chargable battery, which installed
in monitor, or working by powered supply, and another choice for display is
CRT monitor.
1.2 Features
Sharp picture
Easy operability
Compact size, light weight
Low power consumption, working over 6 hours continuously one time
after full recharge
1.3 Application
Fiber network installation
SFP, XFP, TOSA, ROSA inspection
Fiber instrument output inspection
Fiber connector end-face inspection
1.4 Specifications