Sunjoy 088-1807-8 User manual

Model No. 088-1807-8
Assembly Instructions
IMPORTANT:
3-PIECE BISTRO SET
Pleaseread instructions thoroughly beforeassembling. Familiarize yourself with
the inventory of parts and the accompanying illustrations to assure safe and proper assembly.

Made in China
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8

Table of Contents 3
Important Safety Instructions 3
Parts List
4
Assembly 5
6Technical Data
IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY.
DO NOT over-tighten any screws or nuts.
DO NOT operate if any part is damaged or broken.
NOT FOR USE BY CHILDREN.
WARNING:
Repeated assembly can weaken the locking ability of the washers. Please periodically
check all bolted connections on your bistro to ensure they are tight and secure.
Some parts may contain sharp edges. Wear protective gloves as necessary.
Care and Maintenance 6
Warranty 6
3
Table of Contents
Important Safety Instructions

Nut M8 -
Flat washer M6 -
Spring washer M6 -
Wrench -
Flat washer M8 -
Wrench M6/M8 -
Bolt M6x30 -
Bolt M6x20 -
Nut M6 -
Model No. 088-1807-8
4
Parts List
Table top -
Leg -
11
4
4
8
8
4
1
Middle support - 1
Chair back - 2
Seat - 2
12
12
4
A
B
C
D
E
CC
DD
EE
FF
GG
HH
AA
II
BB
A
D
E
C
B

5
sAs embly
Step 1:
Step 3:
Step 4:
Step 2:
Insert the screw of middle support (C) into the hole of each leg (B) and
secure using four nuts (AA) and flat washers（BB).
Place table top (A) upside down，attach leg (B) to table top (A) using
eight nuts (AA) and flat washers (BB), then tighten them by wrench (CC).
Insert chair back (D) into seat (E).
Attach seat (E) to back (D) using bolt (DD), washer (GG), spring washer
(HH) and nut (FF), then use bolt (EE), washer (GG) and nut (FF) as shown.
Finally tighten all nuts using wrench (CC) and wrench (II).
C
C
A
D
FF
E
EGG
B
B
AA
AA
A
BB
BB
B
HH
D
FF
GG
DD
EE