Sunjoy D-BS958SAL User manual

Assembly Instructions
Item# D-BS958SAL
IMPORTANT:
Please read instructions thoroughly before assembly, get yourself familiar with the parts
list and assembly illustrations to ensure the safe and proper assembly.
Please keep the instructions for future reference.
WARNING:
Repeated assembly can weaken the locking ability of the washers. Please periodically
check all bolted connections on your bistro to ensure they are tight and secure.
DO NOT over tighten any screws or nuts.
DO NOT operate if any part is damaged or broken.
NOT FOR USE BY CHILDREN.

Table assembly instruction
Step 1: Attach leg(C) to shelf (B) with bolt (AA) and spring washer(BB), lock with nut
(CC) by using wrench(DD) and Philips-screwdriver, do not tighten fully.
Part#
Description
QTY
A Tabletop 1
B Shelf 1
C Leg 4
AA Bolt M6x35 8
BB M6 Spring washer 8
CC M6 Nut 8
DD M6 Wrench 2
Foot pad
(Preassembled on legs)
4

Step 2: Attach leg(C) to tabletop (A) with bolt (AA) and spring washer (BB),
lock with nut (CC) by using wrench (DD) and Philips-screwdriver. Adjust the table
to be stable, tighten all the bolts and you may have the complete table.

Chair assembly instruction
Part
#
Description QTY
A Back 1
B Armrest1 1
C Armrest2 1
D Seat 1
E1
Front side Leg
2
E2 Backside Leg 2
F
Decorative part
1
G Support bar 2
AA Bolt M6x35 20
BB Spring washer M6 20
CC Nut M6 20
DD Wrench M6 2
Foot Pad
(Preassembled on legs)
4
Step 1: Attach leg (E1/E2) to seat (D) with (AA) and spring washer (BB), lock by
nut M6 (CC) by using wrench (DD) and Philips-screwdriver as Fig. 1 shown,
don’t tighten fully. Attached the two support bar (G) to legs (E) with bolt (AA),
spring washer (BB).And nut (CC) by using wrench (DD) as Fig.2 shown.
E1
E2
E1

Step 2: Attach decorative part (F) to seat (D) with bolt (AA) and spring washer
(BB), secure by nut (CC) by using wrench (DD) and Philips-screwdriver as showed
on picture. Fix the two support bar (G) by bolt (AA) and nut (CC). Adjust the chair
base to be stable, and tighten all bolts.

Step3: Attach back (A) to seat (D) with bolt
(AA) and spring washer (BB), then lock
And tighten with nut (CC) using wrench
(DD) and Philips-screwdriver.
Step 4: Attach bottom of armrest (B), (C)
to seat (D) with bolt (AA) spring washer
(BB), lock and tighten by nut (CC) using
wrench (DD) and Philips-screwdriver.
Attach side of armrest (B), (C) to back (A)
with bolt (AA) and spring washer (BB),
secure and tighten by (CC) using wench
(DD) and Philips-screwdriver.
Now, the set is ready to use, enjoy it!

Limited Warranty:
This product carries a one (1) year warranty against defects in workmanship and materials.
Important: For technical assistance on assembly or replacement parts. In the continental U.S.,
you can call us toll-free at 1-866-578-6569 from 8 a.m. to 5 p.m. CST Monday – Friday. In the
continental Canada, you can call us toll-free at 1-844-SUNJOY1 (1-844-786-5691) from 8 a.m.
to 5 p.m. CST Monday – Friday. You can fax the replacement part form which is in the box to
(740)-283-3549 .You can also send us an email to [e-mail].
The
manufacturer reserves the right to repair or replace the defective product, at its discretion.
Made in China