Sunlighten lumiNIR User manual

Follow these simple steps for maximum results:
• Read Quick Start Guide.
• Take note of the treatment area before you begin to measure results.
• Take a “before” picture if applicable.
• Refer to www.sunlighten.com/lumiNIR for FAQs and treatment protocols.
lumiNIR
Congratulations on your lumiNIR purchase!
Get to Know Your Device:
LED attachment
LED detach lever
Power button
Intensity button
Treatment Steps:
• Cleanse and dry skin
• Turn on device and select intensity level (see chart on back)
• Place light directly on clean, dry skin
• Device will beep when treatment time ends
• Move on to your next treatment area
QUICK START GUIDE

lumiNIR Intensity Options
The lumiNIR offers four intensity levels. Level 1 is considered one dose.
This is the minimum amount needed for a treatment. You can increase the dosage based on your need.
Intensity Level Light Indicator
(the light on the on device will change color for each level) Treatment Time
Level 1 (default) Green light 35 seconds
Level 2 Blue light 1:10 minutes
Level 3 Green/Red light 1:45 minutes
Level 4 Red light 2:20 minutes
Cleaning:
Use a damp, soft, lint-free cloth and water or rubbing alcohol to clean the LED attachments. Makeup wipes are also a good option.
Do not immerse in water at any time. The back of the LED heads must remain dry.
For specic treatment protocols, visit www.sunlighten.com/luminir/#protocols.
www.sunlighten.com |877-292-0020