Sunmaxx solar Thermopower vdf20 User manual



Binghamton, NY 1.877.786.6299 fax: 1.800.786.0329 www.sunmaxxsolar.com

 1



SunMaxx

U‐PipeSolarCollector

InstallationManual



WARNING!

Foryoursafety,pleasereadthroughthismanualcarefullybeforeinstallationtominimize

theriskoffire,propertydamage,andpersonalinjury!

SAFETYPRECATIONS



Binghamton, NY 1.877.786.6299 fax: 1.800.786.0329 www.sunmaxxsolar.com

 2



OnlyusethesolarhotwatersystemasintendedanddescribedintheInstallationManual;

deviationsfromtheInstallationManualwillvoidthewarrantyandmayleadtofire,

propertydamage,andpersonalinjury.

SolarhotwatersystemmustbeproperlyinstalledinaccordancewithInstallationand

TechnicalManualbeforeitisused.

Donotstoreanycombustiblematerialsinthevicinityofthesystem.(dryleaves,tree

branches,gasoline,andothercombustiblematerials)

Wearprotectiveglovesandsafetyglassesduringinstallation.

Usecautionwhilehandlingtheevacuatedtubes;themetalpartoftheevacuatedtube

mightbeHOT.

Keepthesolarhotwatersystemandcomponentsawayfromchildrenandanimals.

BEFOREYOUSTART

 Theassemblyofthesolarhotwatersystemrequirestwoablepersonswiththeabilitytolift

75poundseach.

 Besttoinstallonacoolandcloudyday.

 Storeevacuatedtubesindarkorshadedplacesuntilinsertionintothemanifold.

 Exposureofthesolarcollectorwithinstalledevacuatedtubestodirectsunlightfor

extendedperiodswithoutprotectiveheattransferfluidmayvoidwarranty(ifexposedto

directsunlightforthirtyormoredays).Seewarrantyforadditionalinformation.

 ItisrecommendedtoremovetheevacuatedtubesfromtheVDFcollectorifthesystemwill

beexposedtodirectsunlightforextendedperiodsoftime.

THINGSYOUNEED

 10mmand½inchratchet

 Adjustablewrench

 Liquidsoaporothernon‐flammablelubricant



Binghamton, NY 1.877.786.6299 fax: 1.800.786.0329 www.sunmaxxsolar.com

 3



Components

PartA:OnepartiallyassemblyU‐Pipesystem(1).

Coldwatercomesinfromtheleftsideandhotwaterleavesfrom

therightside!



PartB:Foot

(4)



PartC:Right

Leg(1)



Binghamton, NY 1.877.786.6299 fax: 1.800.786.0329 www.sunmaxxsolar.com

 4



PartD:Left

Leg(1)



PartE:

Crossbar(2)



PartF:

Connecting

Plate(2)



PartG:Side

Bar(2) 

PartH Onebagofnutsandbolts



Binghamton, NY 1.877.786.6299 fax: 1.800.786.0329 www.sunmaxxsolar.com

 5



Installation Instructions: Flat Mounting

*Skip to next page if angle mounting

1) ATTACHING THE FEET TO THE PARTIALLY ASSEMBLY SYSTEM

a) Align the hole of the foot to the hole of the partially assembly U-Pipe system.

b) Insert 10mm bolt and nut and tighten with 10mm ratchet. The two big holes on the foot are

used to bolt the system onto the roof or other surface.

c) Repeat this for all four corners of the system.



Binghamton, NY 1.877.786.6299 fax: 1.800.786.0329 www.sunmaxxsolar.com

 6



Installation Instructions: Angle Mounting

1) ATTACHING THE FEET TO THE PARTIALLY ASSEMBLY SYSTEM

a) Only attach the feet to the bottom of the system

b) Align the hole of the foot to the hole of the partially assembly U-Pipe system.

c) Insert 10mm bolt and nut and tighten with 10mm ratchet. The two big holes on the foot are

used to bolt the system onto the roof or other surface.

2) INSTALLING THE FOOT TO THE LEG



Binghamton, NY 1.877.786.6299 fax: 1.800.786.0329 www.sunmaxxsolar.com

 7



a) Align the hole of the foot to the bottom hole of the left leg, insert 10mm nut and bolt and

tighten.

b) Repeat this for the right leg.

3) INSTALLING CONNECTING PLATES TO THE ASSEMBLY

a) Align holes of the connecting plate to the top two holes of the leg. Insert 10 mm nut and bolt

and tighten.

b) Repeat for the right leg.

4) INSTALLING CROSSBARS TO THE LEGS

a) Align the hole of the crossbar to the front hole of the left leg.

b) Align the other hole of the crossbar to the front upper part of the right leg.



Binghamton, NY 1.877.786.6299 fax: 1.800.786.0329 www.sunmaxxsolar.com

 8



c) Repeat this for the second crossbar on the back of the leg.

d) Connect the two crossbars together in the middle using the long bolt.

5) INSTALLING FRAME TO ASSEMBLY

a) Have one person holding the tube assembly up.



Binghamton, NY 1.877.786.6299 fax: 1.800.786.0329 www.sunmaxxsolar.com

 9



b) Connect the frame and assembly together by joining them with the connecting plate and two

bolts and nuts.

c) Repeat this for the left side.

d) Connect the sidebar from the frame to the assembly and secure it with two nuts and bolts.

e) Repeat this for left side.

6) THE END PRODUCT SHOULD LOOK LIKE THIS

 MAKE SURE TO TIGHTEN ALL NUTS AND BOLTS!



Binghamton, NY 1.877.786.6299 fax: 1.800.786.0329 www.sunmaxxsolar.com

    10



REPLACING BROKEN TUBES

WEAR PROTECTIVE GLOVES AND SAFETY GLASSES DURING INSTALLATION.



Binghamton, NY 1.877.786.6299 fax: 1.800.786.0329 www.sunmaxxsolar.com

    11



1) REMOVING DAMAGED TUBES

a. Detach the tube assembly from the frame.

b. Unscrew the end cap.

c) Carefully take out the damage tube by pulling and twisting slowing.

2) INSERTING A TUBE

a. Fit the o-ring in the manifold first.



Binghamton, NY 1.877.786.6299 fax: 1.800.786.0329 www.sunmaxxsolar.com

    12



b. Insert tube onto the aluminum fin.

c. Carefully insert the tube into the manifold; a small amount of non-flammable

lubrication might be need inside the o-ring to smoothly insert the tube.

d. Screw the end cap back on.

e. Reattach the manifold to the frame.





SunMaxx Solar ThermoPower VDF20 User manual

Popular Solar Panel manuals by other brands