Sunmer FSB001 Installation instructions

GARDEN SWING
CHAIR
---------------------------------------------------------
EN USER INSTRUCTION & OPERATION MANUAL
ES MANUAL DE INSTRUCCIONES Y OPERACIONES PARA EL USUARIO
DE BENUTZERANLEITUNG & BETRIEBSANLEITUNG
FR MANUEL D'UTILISATION ET D'UTILISATION
IT ISTRUZIONI PER L'USO E MANUALE OPERATIVO
WATERPROOF
THREE SEATS
ADJUSTABLE
CANOPY
CAN HOLD UP
TO 200KG
EN

Thank you for purchasing this SUNMER product.
Please read the user manual carefully before using this product.
We will update our instruction manuals if necessary.
For the most up-to-date user manual, please visit our official website:
www.nettadirect.com.
You can download a copy of up to date user manuals at any time in
electronic format. We do not supply you with a paper-based user manual
after each revision.
Require a larger version of this Instruction
Manual?
Please download electronically from our
website and use PDF reader on your
device to enlarge the text if needed.
www.nettadirect.com

SAFETY & WARNINGS...
INTENDED USE
SUNMER products are for private and
residential use only. This product is not
intended for use in public places such as
hotels, sports grounds, etc.
RISK OF PERSONAL INJURY
.
•DO NOT use this product other than for the intended use.
•Failure to follow the warnings could result in a serious injury.
•Handle heavy parts with care.
•Ensure that the product is fully assembled as illustrated before use.
•This product should only be used on firm, level ground.
•Do not stand or climb onto this product.
•Ensure you have the right tools, ample space, and a clean, dry
workspace.
•Check you have all the parts listed.
•Check all screws and bolts are tight before use.
•Do not stand or climb on the product.
•Do not use power tools to construct this product.
•Do not use this product is parts are damaged, missing or worn.
•Do not swag the swing back and forth violently.
•Do not swing the chair from side to side as this will cause the frame to
buckle. Only swing backwards and forwards.
ASSEMBLY
Time: 50 minutes
People required: 2

ASSEMBLING THE PRODUCT

•Slide part Cinto part B.
•Attach together by inserting bolt Q (x2) into the holes provided and fix
together with M6 washers (W) and M6 nuts (V) and tighten.
•Attach nut cover (Z) when the hammock is fully assembled.

•Attach the front leg (part A1) into the back leg (part A2) through the crossbar
by inserting M6 bolts (U) through the holes in the three tubular parts as shown.
•Fix together by using M6 washers (W) and nuts (V) and tighten.
•Repeat on the other side.
•Attach nut cover (Z) when the hammock is fully assembled.

•Attach the side brace (part D) to the outside of the back leg by inserting bolt Q
through the holes provided as shown.
•Fix together by using M6 washer (W) and M6 nut (V) and tighten.
•Repeat for the front leg and then do the same on the opposite side.

•Slide the right rear brace (F) into the left rear brace (E) as shown.
•Insert M6 bolt (T) through the holes provided and fix together using M6
washer (W) and M6 nut (V) and tighten.
•Attach M6 nut cover (Z) when the hammock is fully assembled.

•Attach the assembled rear leg brace from step 4 to the two back legs by
inserting M6 bolt (S) through the holes provided as shown.
•Fix together using M6 washer (W) and M6 nut (V) and tighten.
•Repeat on the other side.

•Attach the armrests (part I) to the front of the seat frame (J) by inserting M8
bolt (R) through the holes provided as shown.
•Fix together by using M8 washer (W) and M8 washer (V) and tighten.
•Repeat on the other side.

•Attach one suspension tube (part G) to the front of the armrest by inserting
M8 (R1) through the holes as shown. Fix together using M8 washer (W) and
M8 nut (V) and tighten.
•Attach the other suspension tube (part G) to the back of the armrest by
inserting M8 bolt (R) through the holes shown.
•Fix together using M8 washer (W) and M8 nut (V) and tighten. Repeat on the
other side

•Attach the seat frame to the main crossbars by inserting a spring (part P)
through the holes provided in the two suspension tubes.
•Repeat on the other side.
•When the springs are attached on the two sides, gently lift the seat frame, and
insert the springs through the metal loops on the crossbar. The assistance of
another person is suggested.

•Attach the canopy side tube (part K) to the crossbar by lining up the plastic
bracket on the canopy side tube with the corresponding plastic part on the
crossbar.
•Fix together by inserting part Y and screwing into place. Use wingnut (Y1) to
help tighten but do not overtighten.
•Repeat on the other side.

•Attach the fabric canopy over part M to the canopy straight tubes (part L) by
inserting the tubes through the fabric tunnels on the underside of the canopy.
•Insert each tube separately and gather the canopy cover into the centre of the
tubes. This will make the next step easier.

•With the assistance of another person, lift the combined canopy cover and
canopy straight tubes up and insert the straight tube into the canopy side tube
as shown.
•Repeat on the back.
•When one side is complete, repeat on the other side of the hammock.
•Be careful not to strain the plastic bracket fittings/brackets on the side of the
hammock

•Fit the main seat and back cushions (part N) to the hammock seat by sliding the
fabric flap on the back of the cushion over the back frame.
•Attach the cushions to the seat frame using the ties provided.
ASSEMBLY IS COMPLETE

CLEANING & MAINTANENCE
•Only clean this swing chair using a damp cloth and mild detergent. Do not use
bleach or abrasive cleaners.
•From time to time, check that no screws are loose on this product.
•This product should not be discarded with household waste. Contact your local
authority for advice on how to dispose of this.

SPARE PARTS/REPAIR
We hope our products will last as long as possible to reduce the
build-up of waste in the world.
If any consumable parts need replacing, please check our website for
stock availability and purchase.
If our website does not have the parts listed, but you still need
consumable parts, please contact our customer support to check
availability and process your order.
To order replacement parts, please go to www.nettadirect.com/parts.
You will need PDC information from your product, user manual or
carton box. Alternatively, go to our website and use search bar to
find the parts available.
You can also find this code on the back of this User Manual.
For our Repair Service, please contact our customer support with
email on
[email protected] they will provide with more details of repair
service with NETTA.

DISPOSAL OF PRODUCT
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
DISPOSAL:
Please dispose of this product responsibly. This item cannot
be disposed of with general waste. Please contact your local
council authority for more information on how to dispose this
product. If this product is disposed of with general waste, it
will end up in a landfill and may leak hazardous substances
into the groundwater –effecting our food chain.

YOUR WARRANTY
If you purchased with NETTADIRECT, or one of our authorised resellers, you will
automatically enrol your warranty for 1 (ONE) year. You do not need to register
again for your warranty. All warranties will be carry out our terms and conditions
include warranty conditions you will find out from our website at
www.nettadirect.com.
PLEASE NOTE: Consumable parts will not be covered by warranty. If a consumable
part needs replacing, you need purchase separately from our website.
Please quote with your original proof of purchase (invoice) and name or delivery
address, postcode, so we can locate you when you contact us for warranty.
NOTES:
You may need fill following details after your purchase.
I purchased this product with ____________________
(Name of Authorised Reseller/Distributor)
Purchase Date: ______/_______/_______
The order number from Authorised Reseller is:
Initial order delivery address is:
_________________________________
_________________________________
_________________________________
_________________________________