Sunny Health & Fitness SF-B910 User manual

SUNNY MAGNETIC EXERCISE BIKE
SF-B910
IMPORTANT: Please read this manual carefully before using the product. Retain
owner’s manual for future reference. For Customer Service, please contact:
[e-mail]

IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use this
equipment correctly. It is important to read this entire manual before assembling and using the
equipment. Safe and effective use can only be achieved if the equipment is assembled,
maintained and used properly. It is your responsibility to ensure that all users of the equipment are
informed of all warnings and precautions.
1. Before starting any exercise program you should consult your physician to determine if you
have any medical or physical conditions that could put your health and safety at risk, or
prevent you from using the equipment properly. Your physician’s advice is essential if you are
taking medication that affects your heart rate, blood pressure or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health.
Stop exercising if you experience any of the following symptoms: pain, tightness in your chest,
irregular heartbeat, and extreme shortness of breath, lightheadedness, dizziness or feelings of
nausea. If you do experience any of these conditions, you should consult your physician
before continuing with your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult use
only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet.
To ensure safety, the equipment should have at least 2 feet of free space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of
the equipment can only be maintained if it is regularly examined for damage and/or wear and
tear.
6. It is recommended that you lubricate all moving parts on a monthly basis.
7. Always use the equipment as indicated. If you find any defective components while
assembling or checking the equipment, or if you hear any unusual noises coming from the
equipment during exercise, stop using the equipment immediately and don’t use the
equipment until the problem has been rectified.
8. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may
become entangled in the equipment.
9. Do not place fingers or objects into moving parts of the exercise equipment.
10. The maximum weight capacity of this unit is 220 pounds.
11. The equipment is not suitable for therapeutic use.
12.You must take care of yourself when lifting and moving the equipment so as not to injure your
back. Always use proper lifting technique and seek assistance if necessary.
13.This equipment is designed for indoor and home use only! It is not intended for commercial
use!
WARNING: This product can expose you to one or more chemicals known to
the State of California to cause cancer and birth defects or reproductive
harm. For more information go to www.P65Warnings.ca.gov.
1

EXPLODED DRAWING
1
E
D
15
14
16
17
E
HI
23 19 21
23
22
20
18
13 27
G
12 11
10
F
25R
6
8
29
28
9
25L
A
4
5
5
A
23
3C
C
B
26
B
7
22
20
24
24
D
E
2

PARTS LIST
No.
Description
Qty
No.
Description
Qty
A
Bolt M8*73
4
13
Upper sensor wire
1
B
Cap nut M8
4
14
Tension control knob
1
C
Arc washer ID8.5*D25
4
15
Handlebar post
1
D
Bolt M8*15
4
16
Arc washer
1
E
Arc washer ID8.5*D19
5
17
Screw M5*45
1
F
Knob M16
1
18
Computer
1
G
Screw M5*15
2
19
Handle pulse wire
1
H
Knob M8
1
20
Screw
2
I
Bolt M8*94
1
21
Handlebar
1
1
Main frame
1
22
End cap
2
2
Front stabilizer
1
23
Sponge tube
2
3
End cap with wheel
2
24
Pulse sensor
2
4
Rear stabilizer
1
25 R,L
Pedal (Left &Right)
2
5
End cap
2
26
Crank
1
6
Seat post bushing
1
27
Computer wire
1
7
Extent cover
1
28
Nylon lock nut M8
3
8
Saddle post
1
29
Washer d8
3
9
Saddle
1
10
Lower tension wire
1
11
Lower sensor wire
1
12
Post connect cover
1
3

HARDWARE PACKAGE
4

ASSEMBLY INSTRUCTIONS
STEP 1:
Secure the Front and Rear Stabilizers (No. 2 and No. 4) to the Main Frame (No. 1) using 4
Bolts (No. A), 4 Arc Washers (No. C) and 4 Cap Nuts (No. B).
5

STEP 2:
Remove the 3 Nylon Lock Nuts (No. 28)and 3 Washers (No. 29) from the Saddle (No. 9). Then
secure the Saddle (No. 9) to the Saddle Post (No. 8) using 3 Nylon Lock Nuts (No. 28)and 3
Washers (No. 29).
Insert the Saddle Post (No. 8) into the tube located on the back end of the Main Frame (No. 1).
Adjust the saddle post to the desired height and secure it in place using the Knob (No. F).
6

STEP 3:
IMPORTANT: Before attempting to connect the link wire of Tension Control Knob (No. 14),
ensure that the Tension Control Knob (No. 14)is turned all the way to the left (the lowest level of
resistance), this will provide the tension wire with the necessary length required to connect it.
Connect the Upper Sensor Wire (No. 13) to the Lower Sensor Wire (No. 11) shown above in
Fig.1. Ensure that the connection is properly secured before continuing.
Lower the link wire of Tension Control Knob (No. 14)from the Handlebar Post (No. 15)and
connect it to the Lower Tension Wire (No. 10)following the tension cable assembly shown
above in Fig. 2.
Attach the Handlebar Post (No. 15)to the Main Frame (No. 1) using 4 Bolts (No. D) and 4 Arc
Washers (No. E), tighten and secure with Allen Wrench.
FIG. 1
FIG.2
7

STEP 4:
Connect the Upper Sensor Wire (No. 13)to the Computer Wire (No. 27)as shown above in Fig.
1. Ensure that the connection is properly secured before continuing.
Secure the Computer (No. 18) onto the mount at the top of the Handlebar Post (No. 15)using 2
Screws (No. G).
FIG.1
8

STEP 5:
Attach the Handlebar (No. 21) to the Handlebar Post (No. 15)using 1 Knob (No. H), 1 Arc
Washer (No. E),and 1 Bolt (No. I). Tighten and secure with Allen Wrench.
Insert the Handle Pulse Wire (No. 19)into the socket on the back of the Computer (No. 18).
9

-10-
STEP 6:
NOTE: The Left and Right Pedals (No. 25Land No. 25R) are marked Lfor the left pedal and R
for the right pedal.
Left Pedal: Align the Left Pedal (No. 25L) with the Left crank arm at 90 degrees. Gently insert
the pedal into the crank arm, turn the pedal counter-clockwise as tightly as you can with your
hand. Tighten and secure with Spanner.
Right Pedal: Align the Right Pedal (No. 25R) with the Right crank arm at 90 degrees. Gently
insert the pedal into the crank arm, turn the pedal clockwise as tightly as you can with your hand.
Tighten and secure with Spanner.
The assembly is complete!
10

Notice:
How to adjust the seat’s
height：
a. Turn the knob 3-4
rotations to the left to
loosen the knob.
b. With one hand pull the
knob out; use your other
hand to move the seat
post to the desired
place.
c. Place the knob in the
desired hole and turn it
clockwise to tighten.
The lowest magnetic force setting is on level 1
The highest magnetic force setting is on level 8
11

EXERCISE COMPUTER INSTRUCTION MANUAL
FUNCTIONAL BUTTONS:
MODE - Press to select functions.
–Press and hold the MODE button for 3 seconds to reset time, distance and calories.
SET –Press to set values of time, pulse, distance and calories when not in scan mode.
RESET - Press to reset values.
A. Press the MODE button to cycle through functions: time, distance and calories to select desired
function.
B. Use the SET button to set a value for time, distance or calories. The value of a function will be set
on a countdown.
C. Press the MODE button once more, to save the function value you’ve created.
–Press to reset time, pulse, distance and calories to zero when not in scan mode.
FUNCTIONS:
1. SCAN: Press MODE button until “▼” appears at SCAN position, the computer will automatically
rotate through all 5 functions: Time, Speed, Distance, Calories and Total Distance. Each function will
display for 6 seconds.
2. TIME: Counts the total time of the exercise from start to finish.
3. SPEED: Displays the current speed.
4. DISTANCE (DIST): Counts the distance of an exercise from start to finish.
5. CALORIES (CAL): Counts the amount of total calories burned during an exercise from start to
finish.
6. TOTAL DISTANCE (ODO): Counts the total distance after installing the batteries.
7. AUTO ON/OFF: When you press a button or start pedaling, the computer will turn on. After 8
minutes of inactivity, the computer will shut off automatically.
8. PULSE RATE
Press MODE button until P appears. In order properly measure your pulse rate, you must place both
your palms on the contact pads located on the handlebar next to the seat. Once you have done this
the computer will show your current heart beat rate in beats per minute (BPM) on the LCD after 3~4
seconds.
Remark: During the process of “pulse measurement”, the initial measurement value may be higher
than pulse rate during the first 2~3 seconds, after which it will return to normal level. To ensure testing
accuracy, it is suggested that user test pulse during stop/pause exercise to avoid any possible
influence. The measurement value cannot be regarded as the basis of medical treatment.
OPERATING INSTRUCTIONS
Press a button on the computer or start pedaling. The computer will measure speed and count the
TIME, DISTANCE, CALORIES, and TOTAL DISTANCE. Press MODE until meter is on SCAN or until
it is on a function you want to display.
COUNTDOWN
The functions of time, distance and calorie can be set to countdown. Make sure the computer is not
on SCAN. Press MODE to select the function, then press SET to adjust the value. Begin pedaling and
the computer will countdown. When the value goes to zero, the computer will beep and start counting
up again.
12

SPECIFICATIONS
FUNCTION
Auto Scan
Every 6 seconds
Running Time
00:00 ~ 99:59(Minute: Second)
Current Speed
The max pick-up signal is 999.9 MILE/HR
Trip Distance
0.0 ~ 999.9 MILE
Calories
0 ~ 9999 Kcal
Total Distance
0 ~ 9999 MILE
Pulse Rate
40-240BPM
Battery Type
2 pcs of SIZE- AAA (included)
Operating Temperature
0℃~ +40℃(32℉~ 104℉)
Storage Temperature
-10℃~ +60℃(14℉~ 140℉)
BATTERY REPLACEMENT
The batteries are located on the back of the computer. To replace the batteries, open the battery
cover. Remove the batteries. Replace with new batteries. Make sure the (-) end of the battery
goes to the spring end in the battery compartment. Put the cover back.
When changing batteries, always change both of them with new batteries. Do not mix old and new
batteries.
BATTERY DISPOSAL
Dispose of batteries according to the laws and regulations of your local region. Some batteries
may be recycled. When disposing or recycling, do not mix battery types.
Version 1.3
13