Sunny Health & Fitness SF-RB420032 User manual

PERFORMANCE INTERACTIVE SERIES
RECUMBENT BIKE
WITH ARM EXERCISER
SF-RB420032
USER MANUAL
English, Pages 1~15 IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your
satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US:
[email protected] or 1-877-90SUNNY (877-907-8669).
Español, Páginas 16~30 IMPORTANTE Por favor, conserve el manual del propietario para las instrucciones de mantenimiento y
ajuste. Su satisfacción es muy importante para nosotros, POR FAVOR NO DEVUELVA EL
PRODUCTO HASTA QUE SE HAYA COMUNICADO CON NOSOTROS:
[email protected] o 1-877-90SUNNY (877-907-8669).
Français, Pages 31~45 IMPORTANT ! Veuillez conserver le manuel du propriétaire pour les instructions d'entretien et de
réglage. Votre satisfaction est très importante pour nous, VEUILLEZ NE PAS RETOURNER AVANT
DE NOUS AVOIR CONTACTE : [email protected] ou 1-877-90SUNNY
(877-907-8669).
Deutsch, Seiten 46~60WICHTIG! Bitte bewahren Sie das Benutzerhandbuch für Wartungs- und Einstellanweisungen auf. Ihre
Zufriedenheit ist uns sehr wichtig. BITTE SENDEN SIE NICHT ZURÜCK, BEVOR SIE UNS
KONTAKTIERT HABEN: [e-mail] oder 1-877-90SUNNY (877-907-8669).
Italiano, Pagine 61~75 IMPORTANTE! Conservare il manuale d'uso per le istruzioni di manutenzione e regolazione. La vostra
soddisfazione èmolto importante per noi, VI PREGO DI NON RESTITUIRE IL PRODOTTO PRIMA DI
AVERCI CONTATTATO: [email protected] o 1-877-90SUNNY (877-907-8669).

1
IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use this
equipment correctly. It is important to read this entire manual before assembling and using the
equipment. Safe and effective use can only be achieved if the equipment is assembled,
maintained and used properly. It is your responsibility to ensure that all users of the equipment are
informed of all warnings and precautions.
1. Before starting any exercise program you should consult your physician to determine if you
have any medical or physical conditions that could put your health and safety at risk, or prevent
you from using the equipment properly. Your physician’s advice is essential if you are taking
medication that affects your heart rate, blood pressure or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop
exercising if you experience any of the following symptoms: pain, tightness in your chest,
irregular heartbeat, shortness of breath, lightheadedness, dizziness or feelings of nausea. If
you do experience any of these conditions, you should consult your physician before continuing
with your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult use
only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet.
To ensure safety, the equipment should have at least 4 feet (1.2 M) of free space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of
the equipment can only be maintained if it is regularly examined for damage and/or wear and
tear.
6. Always use the equipment as indicated. If you find any defective components while assembling
or checking the equipment, or if you hear any unusual noises coming from the equipment
during exercise, discontinue use of the equipment immediately and do not use until the
problem has been rectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may
become entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 265 lbs (120 kgs).
10.The equipment is not suitable for therapeutic use.
11.Use caution when lifting and moving the equipment. Always use proper lifting technique and
seek assistance if necessary.
12.Your product is intended for use in cool, dry conditions. You should avoid storage in extreme
cold, hot or damp areas as this may lead to corrosion and other related problems.
13.This equipment is designed for indoor and home use only! It is not intended for commercial
use!

2
PRE-ASSEMBLY CHECK LIST
.Before you start to assemble, please make sure all parts are included.
No.
Description
Spec.
Qty.
No.
Description
Spec.
Qty.
1
Main Frame
1
44
Long Axle
Φ19×300
1
2
Front Stabilizer
1
45L-1
Left Pedal
YH-30
1
3
Rear Stabilizer
1
45R-1
Right Pedal
YH-30
1
4
Handlebar Post
1
52
Support Pad
1
5L
Left Swing Bar
1
62
Seat
1
5R
Right Swing Bar
1
63
Backrest
1
6L-1
Left Connecting Arm
1
64
Nut Cap
S13
2
6R-1
Right Connecting Arm
1
65
Meter
TZ4112
1
7L
Left Handlebar
1
A
Manual
1
7R
Right Handlebar
1
B
Thank You Card
1
9
Rear Handlebar
1
C
Hardware Package
1
10
Adjustable Handle
1
D
Battery
AAA
2
11
Seat Rail
1

3
HARDWARE PACKAGE
Ordering Replacement Parts (U.S. and Canadian Customers only)
Please provide the following information in order for us to accurately identify the part(s) needed:
✓The model number (found on cover of manual)
✓The product name (found on cover of manual)
✓The part number found on the “EXPLODED DIAGRAM” (page 76) and “PARTS LIST” (pages
14-15)
Please contact us at [email protected] or 1-877-90SUNNY (877-907-8669).

4
ASSEMBLY INSTRUCTIONS
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY
(877-907-8669).
STEP 1
Remove the 2 Paper Tubes (No. E), 4
Carriage Bolts (No. 27), 4 Arc Washers (No.
26)and 4 Cap Nuts (No. 33) from the Main
Frame (No. 1) using Spanner (No. 119).
NOTE: You may discard the 2 Paper Tubes
(No. E) or save them to repackage the item in
the future.
Attach the Front Stabilizer (No. 2) and the
Rear Stabilizer (No. 3) to the Main Frame
(No. 1) with 4 Carriage Bolts (No. 27), 4 Arc
Washers (No. 26) and 4 Cap Nuts (No. 33)
that were just removed using Spanner (No.
119).
Tighten the Support Pad (No. 52) to the
bottom of the Main Frame (No. 1).

5
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY
(877-907-8669).
STEP 2
Remove 4 Screws (No. 22), 4 Spring Washers
(No. 41) and 4 Arc Washers (No. 26) from the
Main Frame (No. 1) using Allen Wrench (No.
120).
NOTE: Make sure the Tension Controller (No.
71a) is at the lowest level before you connect
the cable. This ensures the cables are at their
longest point. We recommend the assistance of
a second person to help hold the Handlebar
Post (No. 4). This will make the connection
easier when you are attaching Tension Hook
(No. 72)to the Tension Cable (No. 71b).
Attach the Tension Cable (No. 71b) into the
metal bracket of Tension Hook (No. 72)as
shown in drawing A-①. Then, pull Tension
Cable (No. 71b) upward and insert it into the
slot of metal bracket of Tension Hook (No. 72)
as shown in drawing A-③. Make sure the metal
fitting on Tension Cable (No. 71b) is secured in
the metal bracket.
Connect the Pulse Extension Wire 2 (No. 77)
to the Pulse Extension Wire 1 (No. 76)and
connect the Sensor Extension Wire 2 (No. 74)
to the Sensor Extension Wire 1 (No. 73).
Attach the Handlebar Post (No. 4) to the Main
Frame (No. 1) with 4 Screws (No. 22), 4
Spring Washers (No. 41) and 4 Arc Washers
(No. 26) that were just removed. Tighten and
secure with the Allen Wrench (No. 120).
NOTE: Do not cut or pinch any wires when
attaching the Handlebar Post (No. 4).

6
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY
(877-907-8669).
STEP 3
Remove 2 Hex Screws (No. 30),2Spring
Washers (No. 41),2Flat Washers (No. 38)
and 2Wave Washers (No. 36)from the Long
Axle (No. 44) using the Spanner (No. 119) and
the Spanner (No. 122).
Insert the Long Axle (No. 44)into the
Handlebar Post (No. 4), then insert 2 Wave
Washers (No. 36)that were just removed to
the both sides of Long Axle (No. 44).Attach
the Left and Right Swing Bars (No. 5L & No.
5R)to both sides of the Long Axle (No. 44)
using 2Flat Washers (No. 38), 2 Spring
Washers (No. 41)and 2 Hex Screws (No. 30)
that were just removed. Pre-secure with the
Spanner (No. 119) and the Spanner (No.
122).
NOTE: Do not completely tighten the Hex
Screws (No. 30)yet.

7
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY
(877-907- 8669).
STEP 4
Remove Left and Right Nylon Nuts (No. 23L & No.
23R) and 2 Spring Washers (No. 78)from the Left
and Right Pedals (No. 45L-1 & No. 45R-1) by
Spanner (No. 123).
Attach the Left Pedal (No. 45L-1) to the left side of
Crank (No. 35) with 1 Left Connecting Arm (No.
6L-1), 1 Spacer (No. 43-1) and 1 Alloy Bushing
(No. 24-1).Turn the Left Pedal (No. 45L-1)
counter-clockwise as tightly as you can with your
hand. Use Spanner (No. 119) to hold the pedal bolt
on Left Pedal (No. 45L-1) in place. Use Spanner
(No. 123)to screw 1 Spring Washer (No. 78)and 1
BLACK Left Nylon Nut (No. 23L) clockwise onto the
end of Left Pedal (No. 45L-1).
Attach the Right Pedal (No. 45R-1) to the right side
of Crank (No. 35) with 1 Right Connecting Arm (No.
6R-1), 1 Spacer (No. 43-1) and 1 Alloy Bushing
(No. 24-1).Turn the Right Pedal (No. 45R-1)
clockwise as tightly as you can with your hand. Use
Spanner (No. 119) to hold the pedal bolt on Right
Pedal (No. 45R-1) in place. Use Spanner (No. 123)
to screw 1 Spring Washer (No. 78)and 1 WHITE
Right Nylon Nut (No. 23R) counter-clockwise onto
the end of Right Pedal (No. 45R-1).
NOTE: Please do not fully tighten Left and Right
Pedals (No. 45L-1 & No. 45R-1) and Left and Right
Nylon Nuts (No. 23L & No. 23R) at this time.
Attaching the Left and Right Pedals (No. 45L-1 &
No. 45R-1) to the wrong side of the Crank (No. 35)or
turning it the wrong direction can damage the Crank
(No. 35).
Attach Left and Right Swing Bars (No. 5L & No.
5R)to Left and Right Connecting Arms (No. 6L-1 &
No. 6R-1) with 2 Bolts (No. 19),2 Flat Washers (No.
39) and 2 Nylon Nuts (No. 34)using Allen Wrench
(No. 121) and Spanner (No. 119).
NOTE: Please do not fully tighten 2 Bolts (No. 19) at
this time.
Firstly, fasten Left and Right Pedals (No. 45L-1 &
No. 45R-1) and Left and Right Nylon Nuts (No. 23L
& No. 23R) using Spanner (No. 123)and Spanner
(No. 119).
Secondly, fasten 2 Bolts (No. 19) and 2 Nylon Nuts
(No. 34)using Allen Wrench (No. 121) and Spanner
(No. 119).
Then fasten 2 Hex Screws (No. 30)for STEP 3 using
Spanner (No. 119) and the Spanner (No. 122).
Finally, cover with 2 Nut Caps (No. 64).
NOTE: Ensure that all bolts and washers are in place
and partially threaded in before completely tightening
any of them.

8
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY
(877-907- 8669).
STEP 5
Attach Left and Right Handlebars (No. 7L &
No. 7R) to Left and Right Swing Bars (No. 5L
& No. 5R) with 4 Carriage Bolts (No. 29),4
Arc Washers (No. 26) and 4 Cap Nuts (No.
33).Tighten and secure with Spanner (No.
119).
Remove the preassembled 4 Screws (No. 70)
from the Meter (No. 65) with Spanner (No.
119).
Connect the Pulse Extension Wire 2 (No. 77)
with Meter Pulse Connecting Wire (No. 65b),
and connect the Sensor Extension Wire 2
(No. 74) with Meter Sensor Connecting Wire
(No. 65a).
Attach the Meter (No. 65)to the bracket of the
Handlebar Post (No. 4) with 4 Screws (No.
70) that were just removed using Spanner (No.
119).
STEP 6
Attach the Seat Rail (No. 11) to the Main
Frame (No. 1) with 4 Bolts (No. 20) and 4 Flat
Washers (No. 39). Tighten and secure with
Allen Wrench (No. 120).
Remove 2 Screws (No. 16)from the
Adjustable Handle (No. 10) using Allen
Wrench (No. 121).
Attach the Adjustable Handle (No. 10) to the
Axle (No. 12) with 2 Screws (No. 16)that
were just removed. Tighten and secure with
Allen Wrench (No. 121).

9
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [email protected] or 1-877-90SUNNY
(877-907-8669).
STEP 7
Remove 1 Screw (No. 22), 1 Spring Washer
(No. 41) and 1 Flat Washer (No. 39) from the
Seat Support (No. 8) using Allen Wrench
(No. 120).
Attach the Rear Handlebar (No. 9) to the Seat
Support (No. 8)with 1 Screw (No. 22), 1
Spring Washer (No. 41)and 1 Flat Washer
(No. 39) that were just removed. Tighten and
secure with Allen Wrench (No. 120).
Tighten the Rear Handlebar (No. 9) to the
Seat Support (No. 8) with 1 Carriage Bolt
(No. 28), 1 Flat Washer (No. 39) and 1 Nylon
Nut (No. 34) using Spanner (No. 119).
Connect the Pulse Extension Wire 1 (No. 76)
to the Pulse Wire (No. 75).
Attach the Seat (No. 62) to the Seat Support
(No. 8) with 4 Flat Washers (No. 39) and 4
Screws (No. 22). Tighten and secure with
Allen Wrench (No. 120).
Attach the Backrest (No. 63)to the Seat
Support (No. 8) with 2 Flat Washers (No. 39)
and 2 Bolts (No. 18) using Allen Wrench (No.
121).
THE ASSEMBLY IS COMPLETE!