Sunny Health & Fitness SF-B1805 User manual

MAGNETIC INDOOR CYCLING BIKE
SF-B1805
USER MANUAL
IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions.
Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE
CONTACTED US: [e-mail] or 1-877-90SUNNY (877-907-8669).

2
IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use this equipment
correctly. It is important to read this entire manual before assembling and using the equipment. Safe
and effective use can only be achieved if the equipment is assembled, maintained and used properly.
It is your responsibility to ensure that all users of the equipment are informed of all warnings and
precautions.
1. Before starting any exercise program, you should consult your physician to determine if you have
any medical or physical conditions that could put your health and safety at risk, or prevent you
from using the equipment properly. Your physician’s advice is essential if you are taking
medication that affects your heart rate, blood pressure or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop
exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular
heartbeat, shortness of breath, lightheadedness, dizziness or feelings of nausea. If you do
experience any of these conditions, you should consult your physician before continuing with your
exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To
ensure safety, the equipment should have at least 4 feet (1.2 M)of free space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of the
equipment can only be maintained if it is regularly examined for damage and/or wear and tear.
6. Always use the equipment as indicated. If you find any defective components while assembling or
checking the equipment, or if you hear any unusual noises coming from the equipment during
exercise, discontinue use of the equipment immediately and do not use until the problem has
been rectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become
entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 300 pounds (135 KG).
10.The equipment is not suitable for therapeutic use.
11.To avoid bodily injury and/or damage to the product or property, proper lifting and moving is
required.
12.Your product is intended for use in cool, dry conditions. You should avoid storage in extreme cold,
hot or damp areas as this may lead to corrosion and other related problems.
13. This equipment is designed for indoor and home use only, it is not intended for commercial use!

3
EXPLODED DIAGRAM

4
HARDWARE PACKAGE
#6 (M8*L100) 4PCS
#7 (
Φ8XΦ16X1.5
)4PCS
#8 (D8)4PCS
#9 (M8) 4PCS
#38 S3 1PC
#40 S5 1PC
#39 S4 1PC
#41 S6 1PC
#42 S10,13,14,15,17 1PC
#43 S13,15 1PC

5
PARTS LIST
No. Description Spec. Qty No. Description Spec. Qty
1 Main Frame 1 23
Hex Stopper
Screw
M6X6
1
2 Front Stabilizer 1 24
Hex Socket Cap
Screw
M5X12
2
3 Front End Cap 2 25 Handlebar Post 1
4 Rear End Cap 2 26 Handlebar 1
5 Foot Pad 2 27 L Shaped Knob 1
6 Carriage Bolt
M8XL100
4 28 Seat 1
7 Flat Washer
Φ8XΦ16X1.
5
6 29L/R Crank 1 pr.
8 Spring Washer
D8
4 30 Protective Cover 1
9 Acorn Nut
M8
4 31 Brake Knob 1
10 Nylon Nut
M8
2 32 Flat Washer
Φ40XΦ10X4
1
11 Wheel 2 33 Hex Screw
M10
2
12 Rear Stabilizer 1 34
Inner Hexagon
Panhead Bolt
M10X18
2
13
Hexagon Socket
Head Screw
M8X45
2 35
Cross Head
Screw
M5X12
2
14
Cross Recessed
Countersunk
Head Screw
M4X12
2 36 Flat Washer
Φ5.2XΦ10X1
2
15L/R Pedal 1 pr. 37
Water Bottle
Holder
1
16 L Shaped Knob 3 38 Allen Wrench
S3
1
17 Bushing 1 39 Allen Wrench
S4
1
18 Seat Post 1 40 Allen Wrench
S5
1
19
Seat Horizontal
Post
1 41 Allen Wrench
S6
1
20 Tube Plug 3 42 Spanner
S=10,13,14,1
5,17
1
21 Sleeve 4 43 Spanner
S=13,15
1
22 V Shape Block 1
Ordering Replacement Parts (U.S. and Canadian Customers only)
Please provide the following information in order for us to accurately identify the part(s) needed:
The model number (found on cover of manual)
The product name (found on cover of manual)
The part number found on the “EXPLODED DIAGRAM” and “PARTS LIST” (found near the front of
the manual)
Please contact us at [e-mail] or 1- 877 - 90SUNNY (877-907-8669).

6
ASSEMBLY INSTRUCTIONS
STEP 1:
Attach the Front &Rear Stabilizer (No.
2&No. 12)to the Main Frame (No. 1) using 4
Carriage Bolts(No. 6), 4Flat Washers (No. 7),
4 Spring Washers (No. 8) and 4 Acorn Nuts
(No. 9). Tighten and secure with the Spanner
(No. 43).
Insert the Seat Post (No. 18) to the Main
Frame (No. 1), and lock with L Shaped Knob
(No. 16).
STEP 2:
Insert the Handlebar Post (No. 25)
to the
front tube of Main Frame (No. 1), then lock
with L Shaped Knob (No. 16) after adjusting
to the proper height.
Attach the Handlebar (No. 26)
to the
Handlebar Post (No. 25), tighten and secure
with L Shaped Knob (No. 27) and Flat
Washer (No. 32).
Attach the Seat (No. 28) to the Seat
Horizontal Post (No. 19), tighten and secure
with the Spanner (No. 43).
NOTE: Before exercise, please make sure the
Seat (No. 28) is tightened to the Seat
Horizontal Post (No. 19).

7
STEP 3:
IMPORTANT! Read instructions carefully,
failure to do so may cause permanent
damage to your bike.
Before installation, please make sure you have
the Left Pedal (No. 15L)
in hand. Turn the
Brake Knob (No. 31)all the way to the right
until the Crank Arm (No. 29L)is immobilized.
Align the Left Pedal (No. 15L) with the Left
Crank (No. 29L)at 90°and gently insert the
Pedal (No. 15L) into the Crank Arm(No. 29L).
Screw the Left Pedal (No. 15L) COUNTER-
CLOCKWISE into the Left Crank (No. 29L).
Tighten and secure with Spanner (No. 43).
Align the Right pedal with the Right crank at
90°and gently insert the pedal into the crank
arm. Screw the Right Pedal (No. 15R)
CLOCKWISE into the Right Crank (No. 29R).
Tighten and secure with Spanner (No. 43).
Attach the Water Bottle Holder (No. 37) to
the Main Frame (No. 1) with 2 Cross Head
Screws (No. 35) and 2 Flat Washer (No. 36)
by using Spanner (No. 42).

8
ADJUSTMENTS GUIDE
ADJUSTING THE BALANCE
In order to achieve a smooth and comfortable ride, you must
ensure that the stability of the bike is secured. If you notice
that the bike is unbalanced during use, you should adjust the
foot levelers located beneath the front and rear stabilizers.
To do so, use Spanner (No. 42)to loosen Hex Screw (No.
33)by turning it clockwise (direction A). With the screw
loosened, rotate Foot Pad (No. 5) until it sits level with the
surface that the bike is on. When you have finished adjusting
the foot leveler, use Spanner (No. 42)to re-tighten the Hex
Screw (No. 33)by turning it counter-clockwise (direction B).
If required, repeat this process to adjust the remaining feet.
ADJUSTING THE RESISTANCE
Adjust the resistance of the bike using the Tension Knob
(No. 31)
. Increase the level of resistance by turning the
tension knob to the RIGHT (clockwise), decrease the level of
resistance by turning the tension knob to the LEFT (counter-
clockwise). Push down on the Tension Knob (No. 31) for
emergency brake.
ADJUSTING THE SEAT
An appropriate seat height helps to ensure your exercise
efficiency and reduce the risk of injury. Adjusting the seat
forward or backward can help you work out different body
muscle groups.
With one pedal in the upward position, place your foot in the
toe clip and get on the bike. If your leg is bent too much, you
should move the seat up. If your foot cannot touch the pedal
or your leg is too straight, you should move the seat down.
Loosen the [seat adjustment] L Shaped Knob (No. 16)to
raise or lower Seat Post (No. 18) to the desired position.
Make sure Knob (No. 16)secures into the desired hole.
Loosen L Shaped Knob (No. 16) to move the seat forward
or backward to the desired position. Once the position is
located, firmly secure L-shaped Knob (No.16)
by turning
clockwise.

9
DISMOUNTING THE BIKE
WARNING! Do not dismount t
he bike or remove your feet
from the pedals until the pedals have stopped completely.
You can stop the flywheel at anytime by pushing down on
Brake Knob (No. 31).
ADJUSTING THE HANDLEBAR
Loosen the [handlebar adjustment] Knob (No. 16)to raise or
lower the handlebar to the desired position. Make sure the
Knob (No. 16)
settles into the desired hole and secure it
firmly by turning clockwise. See Figure A.
Loosen the L Shaped Knob (No. 27)to move the handlebar
forward or backward to the desired position.
Once the
handlebar is in the desired position, firmly secure the L
Shaped Knob (No. 27) by turning clockwise. See Figure B.
ADJUSTING THE PEDAL STRAP
Place the ball of each foot in the toe clips so the front of your
shoe fits snuggly in the toe clip cage. Rotate one foot to
within arm’s reach and pull the strap until the top clip cage
fits your shoe snuggly. Insert the strap back into the hoop of
the toe clip. Repeat this for the other foot.
MOVING THE BIKE
To move the bike, first ensure that the handlebar is properly
secured. If the handlebar is loose, tighten the Knob to
secure it. Next, stand at the front of the bike so that you’re
directly in front of the handlebar. Firmly grasp and hold each
side of the handlebar, place one foot on the front stabilizer
and tilt the bike towards you until the transportation wheels
on the front stabilizer touch the ground. With the wheels on
the ground, you can transport the bike to the desired location
with ease.

10
MAINTENANCE INSTRUCTIONS
This is general information for daily, weekly and monthly maintenance to be performed on your bike.
Version 1.1
DAILY MAINTENANCE
After each exercise session, wipe down all
the equipment: seat, frame, handlebars. Pay
special attention to the seat post, handlebar
post and
belt/chain guard. Sweat is very
corrosive and may c
ause problems that
require parts replacement later.
1.
Get on the bike and engage the drive
train.
2.
Pay attention to any vibrations felt
through the pedals. If you feel any
vibrations, you may need to tighten the
pedals, bottom bracket, or adjust the drive
belt/chain tension.
3.
Use a wrench to tighten the pedals until
they are secure.
MONTHLY MAINTENANCE
1. Check all hardware is secure, such as: water
bottle holder, flywheel nuts, belt/chainguard
bolts, brake
caliper lock nuts and brake
caliper tension rod nuts.
2.
Inspect the brake tension rod for signs of
wear such as missing threads. Clean and
lubricate the brake tension rod.
3. Clean and lubricate the seat post, handlebar
post and seat slider. Remove any build up of
foreign material.
WEEKLY MAINTENANCE
1.
Inspect moving parts and tighten the
hardware.
2.
Inspect pull pin frame fittings, making
sure the fittings are snug. Loose frame
fittings may strip out threads over time
and cause extensive damage.
3.
Clean and lubricate pop pin assemblies.
Pull on the pin and spray a small amount
of lubricant onto the shaft.
4.
Tighten the seat hardware, making sure
the seat is level and centered.
5.
Brush and treat the resistance pads.
Remove any foreign material that may
have collected on the pads. Spray the
pads with silicone lubricant. This helps to
reduce noise from friction between the
pads and the flywheel.
6.
Visually inspect the bottom bracket, toe
clips and toe straps. If any of them are
loose or disconnected, attach and tighten.
LEATHER BRAKE PAD CARE (If Applicable)
1.
Perform this maintenance when the brake
pad is first installed and for the life of the
brake pad. Following these simple guidelines
can increase the life of your brake pads.
2. Some brake pad assemblies are pre-
lubricated. Squeeze the brake pad. If
lubricant is released, then the pad has been
pre-lubricated.
3.
If the brake pad is dry, then coat the brake
pad with 3-n-
1 oil. Brush the leather with a
clean, wire bristle brush, and then apply the
oil. The oil should be allowed to soak in to
the pad. Repeat 4-
5 times until the pad is
saturated, but not dripping with oil. When the
pad is saturated, it will no longer absorb oil.
4. Inspect the brake pad weekly and lubricate if
needed. The pad should not have a glazed
appearance. If the pad appears glazed, then
brush it with wire brush and apply lubricant
as needed. If any of the sponge padding is
showing through the leather pad, the brake
pad should be replaced.