Sunnydaze Decor NB-130 User manual

CONTEMPORARY FIRE PIT
NB-130
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.

10/2019FP1803430 Page 1 / 2
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
[e-mail], or via our contact us page at www.SerenityHealth.com/contact-us/
Purchase Date: / / Order/Customer Reference Number:
ASSEMBLY
Align the holes on Legs (B) with the holes on
Support Ring (C) and hand-tighten 4x Bolts (G).
  
AFire Bowl 1
BLeg 3
CSupport Ring 1
DLog Grate 1
ESpark Screen 1
FGrub Screw 3
GBolt 8
HPoker 1
DO NOT FULLY TIGHTEN THE BOLTS BEFORE ASSEMBLING THE BASE & FIRE BOWL.
Align the holes in Fire Bowl (A) with the holes on
the top of Legs (B). Hand-tighten 4x Bolts (G).
Tighten all bolts with a Phillips screwdriver (not included).
Inspect packaging to ensure all
parts are accounted for before
disposing of packaging.


Phillips Screwdriver
STEP 1 STEP 2

10/2019FP1803430 Page 2 / 2

SAFETY STATEMENTS & WARNINGS
• For outdoor use only. Never use this product in an enclosed area.
• Always follow local laws and regulations when using wood-burning fire pits.
• Exercise the same care and precautions as you would with an open fire.
• Keep unit a safe distance away from buildings, balconies, or overhangs when in use.
• Only use this fire pit on a level, non-combustible surface.
• Do not use on or near combustible surfaces or structures such as wood decks, dry leaves or grass, mulch, vinyl or wood siding, etc.
• Keep away from all combustible materials including gasoline and other flammable liquids and vapors.
• Never use accelerants such as, but not limited to, gasoline, alcohol, paint thinners, kerosene, as this may cause serious injury or
product damage.
• The fire pit becomes very hot when in use; let it completely cool before cleaning or moving.
• Keep out of reach of children.
• Do not overfill or use this unit to burn leaves or trash.
• Avoid using any fire pit during dry or windy conditions.
• Never leave unit unattended while hot or in use.
• Supervise children and pets when the fire pit is in use.
• DO NOT USE CHEMICAL-BASED CLEANERS as this may damage the product and/or ignite a flame during the next use.
• Extinguish the fire properly before leaving. Use a fire extinguisher or a bucket of sand to smother the fire if necessary.
Do not use water to extinguish hot fires or embers as this may cause serious injury and may damage the product.
• Ashes can remain hot for a long time after fire is extinguished. Dispose of cold ashes properly.
• Ensure the unit is completely cool before covering, failure to do so will damage the cover and the unit.
CARING FOR YOUR FIRE PIT:
Clean Regularly: All re pits must be cleaned and inspected periodically. The ash produced in wood-burning re pit must be cleaned
out regularly. Never allow ash to accumulate in the bowl.
Clean Safely: Make sure the re has completely died down and the metal is completely cool before you remove the ashes and
cleaning the bowl.
Avoid Plastic: Never use any plastic materials in or nearby a re pit. It is very di󰀩cult to remove the residue later, and the burning
of this residue can cause the emission of toxic fumes.
Cover and Store: If you do not plan to use your re pit for an extended period of time, cover and store it in a dry location; this will
protect it from the elements and dust buildup. Do not allow the re pit to be exposed to water. The manufacturer is not liable for rust
due to weather conditions.
Extinguish: Let res die down gradually, do not use water to put out a re as this may cause the metal to crack from the sudden
drop in temperature.
Hand-tighten 3x Grub Screws (F) to the inside rim of Fire
Bowl (A). DO NOT use tools to tighten the grub screws.
Place Log Grate (D) into Fire Bowl (A) and Spark Screen
(E) onto Fire Bowl (A).
STEP 3 STEP 4