Sunnydaze Decor NB-CGO101 User manual

PORTABLE FOLDING FIRE PIT
NB-CGO101
Read the assembly instructions carefully and follow the care instructions. Keep these instructions for future reference.
09/2019NB-CGO101 Page 1 / 2
  
ALeg/Ring Assembly 1
BFirebowl 1
CSpark Screen 1
D
Carrying Bag
1
EPoker 1
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
[e-mail], or via our contact us page at www.SerenityHealth.com/contact-us/
Purchase Date: / / Order/Customer Reference Number:
Inspect packaging to ensure all parts are
accounted for before disposing of packaging.
ASSEMBLY
1. Place the leg/ring assembly (A)
on a at surface with the latches
down. Lift the leg/ring assembly
straight up and allow the legs to
move down.
3. Place Fire Bowl (B) on Leg/
Ring Assembly (A) and Spark
Screen (C) onto Fire Bowl (B).
2. Take the leg latch hook and place
it in the hole on the ring (Fig. 1, 2).
Lock the latch to the ring (Fig. 3).
A
B
CA Fig. 1
Fig. 2
Fig. 3

PACKAGING
09/2019NB-CGO101 Page 2 / 2

SAFETY STATEMENTS & WARNINGS
• For outdoor use only. Never use this product in an enclosed area.
• Always follow local laws and regulations when using wood-burning fire pits.
• Exercise the same care and precautions as you would with an open fire.
• Keep unit a safe distance away from buildings, balconies, or overhangs when in use.
• Use on a level, non-combustible surface.
• Do not use on or near combustible surfaces or structures such as wood decks, dry leaves or grass, mulch, vinyl or wood siding,
etc.
• Keep away from all combustible materials including gasoline and other flammable liquids and vapors.
• Never use accelerants such as, but not limited to, gasoline, alcohol, paint thinners, kerosene, as this may cause serious injury or
product damage.
• The fire pit becomes very hot when in use; let it completely cool before cleaning or moving.
• Keep out of reach of children.
• Do not overfill or use this unit to burn leaves or trash.
• Avoid using any fire pit during dry or windy conditions.
• Never leave unit unattended while hot or in use.
• Supervise children and pets when the fire pit is in use.
• DO NOT USE CHEMICAL-BASED CLEANERS as this may damage the product and/or ignite a flame during the next use.
• Extinguish the fire properly before leaving. Use a fire extinguisher or a bucket of sand to smother the fire if necessary.
Do not use water to extinguish hot fires or embers as this may cause serious injury and may damage the product.
• Ashes can remain hot for a long time after fire is extinguished. Dispose of cold ashes properly.
• Ensure the unit is completely cool before covering, failure to do so will damage the cover and the unit.
CARING FOR YOUR FIRE PIT:
Clean Regularly: All re pits must be cleaned and inspected periodically. The ash produced in wood-burning re pit
must be cleaned out regularly. Never allow ash to accumulate in the bowl.
Clean Safely: Make sure the re has completely died down and the metal is completely cool before you remove the
ashes and cleaning the bowl.
 Never use accelerants to start a re; this is dangerous and can damage your re pit.
 Never use any plastic materials in or nearby a re pit. It is very di󰀩cult to remove the residue later, and
the burning of this residue can cause the emission of toxic fumes.
Use on a Safe Surface: Always use re pits on a smooth, non-combustible surface; do not use on a wood deck or other
combustible surfaces like dry grass, leaves, mulch, etc. Do not use re pits near combustible structures such as vinyl
or wood siding. Take care never to drop your re pit, as any breakage could cause serious damage and costly repairs.
 If you do not plan to use your re pit for an extended period of time, cover and store it in a dry location;
this will protect it from the elements and dust buildup. Do not allow the re pit to be exposed to water. The manufacturer
is not liable for rust due to weather conditions.
Extinguish: Let res die down gradually, do not use water to put out a re as this may cause the metal to crack from
the sudden drop in temperature.
Unzip the carrying bag completely an place it on a at surface. Flip the spark screen upside-down and place
it in the re bowl. Unlatch and collapse the leg/ring assembly and place it on the spark screen. Place the
poker in the cavity. Carefully zip the carrying bag closed.
Make sure all parts are completely cool before packing
them into the carrying bag.
E
D
A
B
C