Sunnydaze Decor NB-147 User manual

08/2020
VICTORIAN FIRE BOWL
NB-147
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.

FP171942 Page 1 / 2
ASSEMBLY
1. Place Base Assembly (B) upright, as shown.
  
AFire Bowl 1
BBase Assembly 1
CLog Grate 1
DSpark Screen 1
EGrub Screw 3
FPoker 1
4. Place Log Grate (C) into Fire Bowl (A) and Spark Screen
(D) onto Fire Bowl (A).
2. Set Fire Bowl (A) onto Base Assembly (B).
3. Hand-tighten 3x Grub Screws (E) to the inside rim of
Fire Bowl (A). Hand-tighten only!
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
CHOKING HAZARD — This item
contains small parts that can be
swallowed. Keep children away
during assembly.
WARNING

FP171942 Page 2 / 2
• For outdoor use only. Never use this product in an enclosed area.
• Always follow local laws and regulations when using wood-burning fire pits.
• Exercise the same care and precautions as you would with an open fire.
• Keep unit a safe distance away from buildings, balconies, or overhangs when in use.
• Only use this fire pit on a level, non-combustible surface.
• Do not use on or near combustible surfaces or structures such as wood decks, dry leaves or grass, mulch, vinyl or
wood siding, etc.
• Keep away from all combustible materials including gasoline and other flammable liquids and vapors.
• Never use accelerants such as, but not limited to, gasoline, alcohol, paint thinners, kerosene, as this may cause serious
injury or product damage.
• The fire pit becomes very hot when in use; let it completely cool before cleaning or moving.
• Keep out of reach of children.
• Do not overfill or use this unit to burn leaves or trash.
• Avoid using any fire pit during dry or windy conditions.
• Never leave unit unattended while hot or in use.
• Supervise children and pets when the fire pit is in use.
• DO NOT USE CHEMICAL-BASED CLEANERS as this may damage the product and/or ignite a flame during the
next use.
• Extinguish the fire properly before leaving. Use a fire extinguisher or a bucket of sand to smother the fire if necessary.
Do not use water to extinguish hot fires or embers as this may cause serious injury and may damage the product.
• Ashes can remain hot for a long time after fire is extinguished. Dispose of cold ashes properly.
• Ensure the unit is completely cool before covering, failure to do so will damage the cover and the unit.
CARING FOR YOUR FIRE PIT:
Clean Regularly: All re pits must be cleaned and inspected periodically. The ash produced in wood-
burning re pit must be cleaned out regularly. Never allow ash to accumulate in the bowl.
Clean Safely: Make sure the re has completely died down and the metal is completely cool before
you remove the ashes and cleaning the bowl.
Avoid Accelerants: Never use accelerants to start a re; this is dangerous and can damage your re pit.
Avoid Plastic: Never use any plastic materials in or nearby a re pit. It is very di󰀩cult to remove the
residue later, and the burning of this residue can cause the emission of toxic fumes.
Use on a Safe Surface: Always use re pits on a smooth, non-combustible surface; do not use on a
wood deck or other combustible surfaces like dry grass, leaves, mulch, etc. Do not use re pits near
combustible structures such as vinyl or wood siding. Take care never to drop your re pit, as any
breakage could cause serious damage and costly repairs.
Cover and Store: If you do not plan to use your re pit for an extended period of time, cover and store
it in a dry location; this will protect it from the elements and dust buildup. Do not allow the re pit to be
exposed to water. The manufacturer is not liable for rust due to weather conditions.
Extinguish: Let res die down gradually, do not use water to put out a re as this may cause the metal
to crack from the sudden drop in temperature.
08/2020

SAFETY STATEMENTS & WARNINGS
WARNING:

