Sunnydaze Decor COSMIC NB-984 User manual

FP2300630 10/2023
COSMIC SMOKELESS FIRE PIT
NB-984
Review all assembly and care information before using this product. Save this manual for future reference.

Page 1 / 4
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
 (not included)
Phillips Screwdriver
  — This item contains small parts that can be
swallowed. Keep children and pets away during assembly.
WARNING
  
ASmokeless
Fire-Bowl 1
BLeg 3
CSafety Ring 4
Heat Deector 1
EAsh Tray 1
FPoker 1
GCover 1
1M6x8mm Bolt 4
2M6x12mm Bolt 16
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,


FP2300630 10/2023 Page 2 / 4
ASSEMBLY
STEP 1
A: 1
E: 1
2: 3
STEP 2
B: 3
2: 9
STEP 3
C: 4
2: 4
1: 4
STEP 4
 1
Securely fasten Ash Tray (E) to the bottom of Smokeless
Fire-Bowl (A) using three M6x12mm Bolts (2).
Align one Leg (B) with the bottom of the re-bowl and
securely fasten using three M6x12mm Bolts (2).
Repeat to fasten the remaining two legs.
Place Heat Deector (D) onto the re-bowl.
Insert one Safety Rings (C) into another and loosely
secure them by hand-tighten the rings to the re-bowl
using M6x12mm Bolts (2). Then, loosely connect the
remaining two rings to the re-bowl.
Ensuring the ring is straight, use four M6x6mm Bolts (1)
to secure the rings to each other.
Finish tightening all bolts.

FP2300630 10/2023 Page 3 / 4
OPERATION
Lighting:
1. Place dry wood that is no longer than 3/4 the depth of the re pit, into the center of the re pit.
Wood should remain below the top row of air holes inside the re pit. Do not let wood rest on the ame rim.
TIP: Start small, use smaller wood pieces for starting the re. Add larger pieces after the re is going strong.
2. Add tinder and dry kindling to the base of the wood stack.
3. Use a long match to light the tinder/kindling.
4. Allow several minutes for the wood to catch re.


Tending:
1. Protective gloves and long-handled tools are recommended for use with this re pit.
2. Use a re poker or re tongs to shift burning wood and embers to allow for additional airow.
3. Wait until the re is going strong before adding additional wood. While adding wood, take care not to
smother the re, leave plenty of room for oxygen between the logs.
Extinguishing:
1. It is best to allow the re to burn out by itself.
2. Do not use water to put out a re, the sudden temperature drop will damage to the re pit.
3. Once the re pit has completely extinguished and cooled down, clean out and properly dispose of all ashes
and debris.
4. When not in use, store this unit in a dry location.
Prepare:
1. Only use seasoned/dry wood; wet wood increases smoke and burns less e󰀩ciently.
2. Clean out all ash and debris before every use. Leaving ash and debris in the re pit reduces airow and can
prevent secondary combustion.
SAFE USE: Always use re pits on a at, non-combustible surface such as concrete, rock, or stone. Do not
use this re pit on a wood deck or any other combustible surfaces like dry grass, leaves, mulch, etc. Never use
in an area with an overhead structure or near unprotected combustible constructions like vinyl or wood siding.
Avoid using near or under overhanging trees and shrubs.
The re pit will become extremely hot while in use. Always use the re-resistant gloves and long-handled tools
while maintaining a re.
 Never use accelerants to start a re; this is dangerous and can damage
the re pit.
Never use any plastic materials in or nearby a re pit. The emissions from burning plastic are toxic. Additionally,
plastic residue is very di󰀩cult to remove and could plug the airow holes.
EXTINGUISH: Let res gradually die down and go out on their own. DO NOT use water to put out a re as
the sudden drop in temperature may damage the metal and/or cause serious injury.
Note, ashes can remain hot long after a re dies down. If you feel heat when your hand is close to the metal
or the ashes, the unit is too hot to safely empty.
CARE & MAINTENANCE

FP2300630 10/2023 Page 4 / 4
SAFETY STATEMENTS & WARNINGS

• For outdoor use only. Never use this product in an enclosed area.
• Always follow local laws and regulations when using wood-burning fire pits.
• Exercise the same care and precautions as you would with an open fire.
• Keep unit a safe distance away from buildings, balconies, or overhangs when in use.
• Only use this fire pit on a level, non-combustible surface.
• Do not use on or near combustible surfaces or structures such as wood decks, dry leaves or grass, mulch, vinyl or wood
siding, etc.
• Keep away from all combustible materials, including gasoline and other flammable liquids and vapors.
• Never use accelerants such as, but not limited to, gasoline, alcohol, paint thinners, kerosene, as this may cause serious injury
and product damage.
• The fire pit becomes very hot when in use. Ensure the unit completely cool before cleaning or moving.
• Always supervise children and pets when the fire pit is in use.
• Do not overfill or use this unit to burn leaves or trash.
• Avoid using any fire pit during dry or windy conditions.
• Never leave unit unattended while hot or in use.
• DO NOT USE CHEMICAL-BASED CLEANERS as this may damage the product and/or ignite a flame during the next use.
• Extinguish the fire properly before leaving the unit unattended. It is best to let the fire die on its own, but you can use a bucket
of sand to smother the fire if necessary. Do not use water to extinguish hot fires or embers as this may cause serious injury
and damage the product.
• Ashes can remain hot for a long time after fire is extinguished. Dispose of cold ashes properly.
• Ensure the unit is completely cool before moving or covering.
Contact your local authorities regarding possible burn restrictions before using this product.
If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team through one of the methods mentioned at the top of page 1.
Please have the item number and your order information ready to expedite response time.
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

:Long-term exposure to high-intensity heat can cause the high-temperature
paint to ake or burn o󰀨 the steel. If the paint burns o󰀨, and the steel is exposed to moisture, it will rust. As with
any outdoor steel product, periodic maintenance is required to maintain integrity and appearance. Remove rust
and renish with a suitable high-temperature paint (not included); carefully follow the manufacturer instructions
and ensure the paint is completely dry before using the unit again.
Do not allow ash to accumulate in the bottom of the pit; ash can plug the airow holes.
Never drop the re pit as doing so could cause permanent damage.
CLEANING: Ensure the re pit and ashes are completely cool before cleaning. Ashes can remain hot long
after a re dies down. If you feel heat when your hand is close to the metal or the ashes, the re pit is too hot
to clean.
Remove ashes and debris from the ash tray and the inside of the re pit before every use.
 Ensure the re pit is completely cool before covering. Always clean the re pit before
covering it. Do not allow the re pit to be exposed to water. Manufacturer is not liable for damage resulting from
general use and/or environmental conditions. Store in a dry location to protect it from the e󰀨ects of weather
elements.