Sunnydaze Decor NB-CGO101 User manual

CAMPFIRE ON THE GO FIRE PIT
ASSEMBLY INSTRUCTIONS
!PLEASE READ ALL RULES FOR SAFE
OPERATION BEFORE ASSEMBLY
!
CAMPFIRE ON THE GO IS FOR OUTDOOR USE ONLY!
USE ONLY ON BRICK, CONCRETE, STONE OR OTHER MASONRY SURFACES!
DO NOT USE ON LAWNS, WOODEN DECKS OR ASPHALT!
MAKE SURE ALL LEG LATCHES ARE SECURE AND LOCKED BEFORE USING.
KEEP THE FIRE ON THE GO AWAY FROM BUILDINGS, FLAMMABLE ITEMS AND
VEHICLES.
CAMPFIRE ON THE GO FIRE PIT IS FOR ADULT USE ONLY.
DO NOT LEAVE UNATTENDED AT ANY TIME WHILE IN USE.
KEEP ALL OBJECTS A SAFE DISTANCE FROM THE SPARK GUARD AND FIRE.
KEEP SPARK GUARD ON AT ALL TIMES WHILE IN USE.
DO NOT USE IN WINDY CONDITIONS!
DO NOT OVERLOAD OR USE FOR BURNING GARBAGE.
NEVER USE GASOLINE, ALCOHOL OR VOLATILE FLUIDS TO START FIRES.
NEVER USE UNDER LOW HANGING TREE BRANBHES, TRELLIS, OVERHANGS
OF ANY KIND INCLUDING COVERED PORCHES.
USE CAUTION WHEN TENDING THE FIRE, AS SURFACES WILL BE HOT WHILE IN USE.
BEFORE EACH USE MAKE SURE THE FIRE ON THE GO IS IN GOOD WORKING
CONDITION.
USE CAUTION AFTER THE FIRE HAS BEEN EXTINGUISHED, SURFACES WILL
REMAIN HOT FOR SOME TIME.
DO NOT DUMP ASHES WERE THEY COULD START A FIRE.
DISPOSE OF ASHES IN PROPER RECEPTACLE ONLY AFTER ASHES HAVE COOLED.
ALL PARTS MUST BE COMPLETELY COOLED BEFORE PLACING THEM IN THE
CARRYING BAG.
PAGE 1
PARTS LIST:
When unpacking Fire on the Go from the carton, make sure you
find and become familiar with all the pieces listed belaw:
A
LEG / RING ASSEMBLY
E
POKER
B
FIREBOWL
C
SPARK GUARD
D
CARRYING BAG
Assembly and Use Instructions for Models:
NB--- CGO101
Camp
-

CAMPFIRE ON THE GO FIRE PIT
PAGE 2
PACKING INSTRUCTIONS:
A
A
INSET 1 INSET 2 INSET 3
C
B
A
ASSEMBLY INSTRUCTIONS:
A
B
D
E
C
STEP 1
Carefully unpack all parts from the carton.
STEP 2
Place the leg / ring assembly (A) on a flat
surface as shown with the latches down.
STEP 3
Lift the leg / ring assembly (A) straight up
to allow the legs to move down.
STEP 4
Take the leg latch hook and move the
hook to the ring hole. SEE INSET 1, 2.
Lock the leg latch to the ring as shown.
SEE INSET 3. Continue to assemble the
remaining legs.
STEP 5
Place the firebowl (B) on the leg / ring
assembly.
STEP 6
Place the spark guard (C) in the center of
the firebowl.
STEP 7
The poker (E) can be used to lift the
spark guard from the firebowl if needed.
STEP 1
Make sure all parts are completely cool to the touch before packing them
in the carrying bag. Unzip the carrying bag completely and place the bag
on a flat surface. Flip the spark guard and place in the firebowl cavity.
Unlatch the legs and place the leg / ring assembly inside the spark guard.
Place the firebowl, leg / ring assembly and spark guard in the unzipped
carrying bag as shown. Place the poker in the cavity.
STEP 2
Zip the carrying bag closed. Use the handle fold to velcro the two pieces
of handle together.
CACAFire on the Go may be cleaned with water and mild detergent.
Periodic maintenance is required to return painted steel surfaces to
original appearance. Remove any rust with sandpaper, steel wool or stee
brush. Repaint with grill paint for high temperature surfaces. Follow pain
manufacturer's instructions.
MAINTENANCE:
E
Camp
! !
WARNING
This product can expose you to carbon Monoxide, which is
known to the State of California to cause cancer. For more
information go to
www.P65Warnings.ca.gov