Sunnydaze Decor SSS-596 User manual

 
Fountain Topper 1
Pedestal 1
Electric Submersible Pump 1
Adapter Cord 1
Decorative Rocks 
ORB ON PEDESTAL CERAMIC OUTDOOR
FOUNTAIN WITH LIGHTS
SSS-596
Read the assembly instructions carefully and follow the care instructions. Keep these instructions for future reference.


03/2020MZ15143BA Page 1 / 2
ASSEMBLY
1. Run the longer cable on the pump through the tube in the pedestal and under the groove in the backside
of the pedestal.
2. Locate the light cable in the fountain topper and connect it to the short cable on the pump.
3. Firmly connect the water tube in the fountain topper to the pump.
4. Gently place the topper onto the pedestal.
5. Gently place the decorative rocks in the fountain, as shown.
6. Connect the pump power cable to the adapter cord.
7. Fill the fountain with enough water to keep the pump fully submerged during operation.
8. Plug the power cord into a properly grounded GFCI outlet.
Note
Purchase Date: / / Order/Customer Reference Number:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerser[email protected], or via our contact us page at https://tiny.cc/SunnydazeContact
NOTE: The water tubing is built into the fountain topper. Take care when handling the water tube; detaching the
water tube will damage the fountain and void the product warranty.
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.

03/2020MZ15143BA Page 2 / 2

IMPORTANT INFORMATION
USE & CARE
• For outdoor use only.
• Some splashing is normal; adjust the flow rate on the pump if the water rate is too high.
• Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as
it will burn out the motor.
• Only use water in this fountain. Distilled water will help prevent mineral buildup but is not required, avoid heavily
chlorinated water as it may damage the fountain or pump.
• Periodically change the water to keep the fountain and pump clean. Remove scale and buildup regularly.
DO NOT use harmful additives such as bleach, chlorine, etc.
DO NOT use a pressure washer or abrasive materials to wash the fountain.
• Always shut off the power supply before cleaning and maintaining the fountain and the recirculating pump.
• Take care when handling the pump; only pick it up by the body of the pump, never by the power cord.
• During freezing weather, drain the fountain, disconnect the pump and store indoors; allowing ice to form may
damage the fountain in such ways as, but not limited to, the fountain cracking, permanent pump damage, and /or
lighting malfunctions.
TROUBLESHOOTING
• Ensure that the pump is fully submerged and add water if necessary.
• Make sure the pump is not suspended inside the fountain.
• If water is not flowing within several moments of the fountain being plugged in, the pump may have trapped air
which can prevent water from circulating properly. Simply unplug the power supply for a few moments and plug it
back in. Also check the pump and tubing for obstructions.
• If water is not flowing or water is splashing, check the flow control on the body of the pump; it may need to be
adjusted to achieve the desired flow rate.
• If the light is not working, ensure the cables are fully connected and the seal is adequately tightened (do not over-tighten).
• Make sure the adapter cable is fully connected to the pump power cable.
• Make sure the power outlet is working; if in doubt about electrical connections, consult a certified electrician.
If you are still experiencing issues, please contact our customer service team through one of the methods mentioned
at the top of page 1. To expedite response time, please have the item number and order information available.
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage

