Sunnydaze Decor GSI-281 User manual

GSI-281
Warning
•Keep fountain out of reach of children.
•Use proper power source as indicated on water pump label.
•Keep electrical cords away from all heat sources. D not place electrical cords in high temperatures.
•Check water level at pump location regularly, avoid damage the pump must be fully submerged.
PARTS:
A. Basin -1pc
B. Pump and Transformer with finger light -1pc
C. Lower Lid- 1pc
D. Fountain body-1pc
E. Upper lid -1pc
F. Pebbles-1 bag
ASSEMBLY:
1. Insert the pump into the basin and connect the pump with the hose.
2. Connect the transformer.
3. Connect the lower lid to the fountain body and put the fountain body
into the basin.
4. Insert the light into the upper lid then put the lid on the fountain body.
5. Place pebbles on top of the basin, and spread out.
6. Fill with water, and then plug fountain into electrical outlet.
Troubleshooting:
Pump operates but no water flow: Make sure pump is fully submerged in water.
If there is still no water flow, please turn pump on then off several times.
Water speed: Adjust the switch control located on the pump housing.
Noise from pump/Fountain: Make sure pump is fully submerged in water.
Light does not shimmer: Check the light blub to make sure that it is connected to socket.