Sunnydaze Decor XSS-636 User manual

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion, within the one-year warranty period. Proof of
purchase, with the date of purchase as well as photos of the defective merchandise, must be provided. If you have any questions, comments or concerns please feel free to contact us by phone at: 888-881-4668. You may
also contact us by email: c[email protected], or via our webpage at: www.serenityhealth.com/contact-us/
Assembly Instructions for Sunnydaze
Rippling Falls Oval Wall Fountain with LED Light
Item: XSS-636
PART
DESCRIPTION
QUANTITY
PART
DESCRIPTION
QUANTITY
A
FOUNTAIN
1 PC
C
ADAPTOR
1PC
B
WATER
PUMP
1PC

•Take the fountain out of the box.
•Plug the LED light into the adapter that is connected to the pump (Step. 1)
•Connect the pump to the tubing in the fountain (Step 2)
•Take the pump and place it in the water reservoir at bottom of the fountain., (Step 3)
•Route the power cord of the pump through the hole on the side of the fountain. (Step 4)
•Connect the adaptor to the pump cable. (Step 5)
•Put water (1/4 GAL approx.) in the water reservoir of the fountain (about ½ way full), be sure to make
sure there is enough water in the bottom of the fountain so that the pump will be completely submersed.
(Step 6)
•Plug the pump in and enjoy. (Step 7)
Be careful not to spill water onto the plug of the pump.
DO NOT allow the pump to run dry!