Sunnydaze Decor GSI-835 User manual

SPQ1375 Page 1 / 3
RIPPLED SLATE OUTDOOR
WATER FOUNTAIN
WITH COPPER ACCENTS
AND LED SPOTLIGHT
GSI-835
Read the assembly instructions carefully and follow the care instructions.
Save these instructions for future reference.
Select a smooth, level surface to place the fountain.
Assemble components on a soft, clean surface to avoid scratching

09/2021
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
  
AFountain Body 1
BElectric Submersible Pump 1
CSpotlight with AC Adapter 1
DBasin 1
EFront Plate 1
FWasher 2
GBolt 2
HDecorative Stones 1 PK
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
(not included)
Phillips Screwdriver
2-PERSON
ASSEMBLY
RECOMMENDED
IMPORTANT INFORMATION ABOUT SLATE FOUNTAINS:
• Slate is a natural product; the colors and texture of each piece are unique, no two fountains will look the
same. Variations in the slate colors from pictures shown on the product listing is normal.
• Over time, the copper components may patina; this is a natural characteristic of copper when it is exposed
to water and air.
• Each fountain is cut from large slabs of slate. Spalling (flaking) may occur naturally over time, and/or if the
slate is dropped. Use extra care when unpacking and assembling this fountain.
Natural characteristics of the fountain materials are not cause for return.

SPQ1375 Page 2 / 309/2021
CONNECT
D
B
C
E
Light
Pump
Drainage Hole
F
G
H
A
1. Remove the bolts and washers from
Basin (D).
2. Connect Electric Submersible Pump
(B) to Fountain Body (A).
3. Gently lay Front Plate (E) on the front
of the basin. Place Spotlight (C) on
the front plate and run the cord out
the back of the basin. Firmly connect
the AC adapter to the spotlight cable.
4. Gently place Fountain Body (A) onto
the back side of Basin (D), ensuring
the pump power cord runs out the
groove in the back of the basin.
5. Use the washers and bolts removed
during Step 1 to secure the fountain
body to the basin.
6. Rinse Decorative Stones (H) with
clean water. Gently arrange stones
over the front plate and the bottom of
the fountain body.
7. Fill the fountain with enough water to
keep the pump fully submerged during
operation; approximately 3 gallons.
8. Plug both power cords into properly
grounded GFCI outlets.
ASSEMBLY
HELPFUL HINTS
The water tubing is built into the fountain body. Take care when handling the water tube; detaching the
water tube from the fountain will damage the fountain and void the product warranty.
Check the basin for leaks before assembling the fountain. The sealant used to join the slate pieces
can become cracked if the fountain is not handled with care. Simply add water and wait to see if
water begins to leak. If a leak is discovered, contact an expert at your local hardware store for an
appropriate sealant and carefully follow manufacturer instructions to seal the leak.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE APPLICATION OF CHEMICAL TREATMENTS, PROTECTIVE COATINGS, OR SEALANTS.
Note: When rst plugged in, there may be air in the pump. It may take several moments for trapped air to escape, allowing water to ow.

SPQ1375 Page 3 / 309/2021
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
• For outdoor use only.
• The lighting feature of this fountain is optional. To turn the light off, simply unplug the 2-prong power cord.
• Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to
run dry as it will burn out the motor.
• Only use water in this fountain. Distilled water will help prevent mineral buildup but is not required, avoid
heavily chlorinated tap water as it may damage the fountain or pump.
• Periodically change the water to reduce scale and buildup — clean the fountain and pump regularly for
optimal performance and appearance.
DO NOT use harmful additives such as bleach, chlorine, etc.
DO NOT use a pressure washer or abrasive materials to wash the fountain.
• Always shut off the power supply before cleaning and maintaining the fountain and the recirculating pump.
• Take care when handling the pump; only pick it up by the body of the pump, never by the power cord.
• During freezing temperatures, drain the fountain, disconnect the pump and store indoors; allowing ice to
form may crack the fountain and will damage the pump.
IMPORTANT INFORMATION

TROUBLESHOOTING
• If water is not flowing within several moments of the fountain being plugged in, the pump may have trapped
air, preventing water from circulating properly. Simply unplug the power supply for a few moments and plug
it back in.
• If water is still not flowing, ensure that the pump is fully submerged and add water to the reservoir if necessary.
Check the pump and tubing for obstructions. Ensure the water tube is not kinked.
• Some splashing is normal. Check the flow control on the body of the pump; it may need to be adjusted to
achieve the desired flow rate.
• If water is not flowing evenly, it may be due to the porous nature of the slate material. Moisten the entire slate
surface beneath the downspout to even out water flow.
• Pump noise may also be a result of the pump resting too close to the side of the basin. Move the pump away
from the wall of the basin to avoid noise from pump vibration.
• Pump noise may also be caused by air being trapped inside the pump. While the pump is submerged, gently
tap the pump body with your finger to help release the trapped air.
• If the light is not working, ensure the adapter is fully connected and is plugged in.
• Check to make sure the power outlet is working; if in doubt about electrical connections, consult a certified
electrician.
If you are still experiencing problems, please get in touch with our customer service team through one of the methods
mentioned at the top of page 1. To expedite response time, please have the item number and order information available.