Sunnydaze Decor MERANTI FRN-732 User manual

MERANTI WOOD GARDEN STORAGE SHED
FRN-732

Page 1 / 489709
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
12/2021
  
ABack Panel 1
BSide Panel (L/R) 2
CTop Support 1
DBottom Support 1
ERoof 1
FDoor Panel (L/R) 2
GTop Shelf 1
HBottom Shelf 1
  
IJCBC M6x60mm Bolt 8
JJCBC M6x35mm Bolt 4
KM3.5x16mm Screw 8
LM4x30mm Bolt 2
MKnob 2
NBarrel Nut 8
OHex Key w/ Phillips End 1
PBarrel Nut Driver 1
2-PERSON
ASSEMBLY
RECOMMENDED
CHOKING HAZARD — This item contains small parts that can be
swallowed. Keep children and pets away during assembly.
WARNING
(not included)
Phillips Screwdriver


Follow drawings closely and understand assembly before beginning.
Page 2 / 4
STEP 1
A: 1
B: 1
C: 1
D: 1
I: 4
N: 4
STEP 2
B: 1
I: 4
N: 4
89709 12/2021
TIP: Always fully insert the hex key inside the designated
notch of the bolt.
If the hex key is not fully inside the notch, the hex key could
slip out, causing damage to the bolt head. Repeated hex key
slipping will cause the notch to become rounded, making it
di󰀩cult or impossible to tighten the bolt with the hex key.
• Lay Back Panel (A) on a flat, clean surface.
• Insert two Barrel Nuts (N) into the left side of
Back Panel (A). Use the Barrel Nut Driver to
align the opening of the barrel nut with the
openings on the side of the back panel.
• Align the backside of the left Side Panel (B)
with Back Panel (A). Then, loosely fasten
them by threading two JCBC M6x60mm Bolts
(I) into the barrel nuts.
• Ensuring the magnets are facing forward,
insert Top Support (C) into the top of Side
Panel (B).
• Insert a Barrel Nut (N) into the bottom of the
top support. Then loosely fasten the support
to the side panel by threading one JCBC
M6x60mm Bolts (I) into the barrel nut.
• Secure Bottom Support (D) to the bottom of
the side panel using one Barrel Nut (N) and
one JCBC M6x60mm Bolt (I), as shown.
• Align the right side Side Panel (B) with Back
Panel (A), Top Support (C), and Bottom
Support (D).
• Insert two Barrel Nuts (N) into the right side
of the back panel. Use the Barrel Nut Driver
to align the opening of the barrel nut with the
openings on the right side.
• Secure the side panel to the back panel by
threading two JCBC M6x60mm Bolts (I) into
the barrel nuts.
• Insert a Barrel Nut (N) into the bottom of the
top support. Then loosely fasten the support
to the side panel by threading one JCBC
M6x60mm Bolts (I) into the barrel nut.
• Secure Bottom Support (D) to the bottom of
the side panel using one Barrel Nut (N) and
one JCBC M6x60mm Bolt (I), as shown.

Page 3 / 489709 12/2021
STEP 4
F: 2
L: 2
M: 2
STEP 3
E: 1
G: 1
H: 1
J: 4 • Place Roof (E) on the assembled frame.
• Use four JCBC M6x35mm Bolts (J) to secure
the side panels to the roof, as shown.
• Place Bottom Shelf (H) in the bottom of the
storage box.
• Place Top Shelf (G) on the cleats (shelf
supports) that are pre-installed on the side
panels.
TIP: Assistance may be required for aligning
the mounting holes in the roof with the mounting
holes in the side panels.
• Identify the left and right Door Panel (F).
• Secure the left Door Panel (F) to the left side
of the storage box using two M3.5x16mm
Screws (K).
• Secure the right Door Panel (F) to the right
side of the storage box using two M3.5x16mm
Screws (K).
• Secure one Knob (M) to each door using a
M4x30mm Bolt (L).

NOTE: Top Shelf (G) has
additional support beams
on the bottom for increased
weight capacity.
Care & Maintenance
Only use on a at, level surface. Do not exceed the weight capacity of the shelves. Do not stand
or climb on any part of this unit.
This unit is not waterproof. Do not store items that could become damaged by water. Do
not store items that could damage the unit.
Periodically check assembly points and tighten ttings as necessary.
CLEANING: Identify the direction of the woodgrain. Following the direction of the woodgrain, wipe surfaces
with a soft, dry cloth. Do not use harsh chemicals or abrasive materials or a pressure washer to clean.

Page 4 / 4
: Protect this item from inclement weather, especially ice and snow. Move
to a cool, dry indoor location.
Covering while in storage is recommended to help prevent dust build-up.
MAINTENANCE:If left untreated, the wood may weather. To maintain the appearance, apply a suitable
penetrating Wood, Teak or Linseed Oil (not included) yearly, or when the wood looks particularly dry.
Clean the unit and bring it into a dry, warm, indoor location. Allow the unit to thoroughly dry before applying
oil; drying may take several days. Only apply oil to wooden surfaces. Apply oil as directed by the wood oil
manufacturer.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE USE OF CHEMICAL TREATMENTS OR PROTECTIVE COATINGS.
WARNING
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

89709 12/2021
• Do not exceed the weight capacity of each shelf.
• Do not allow children to play in or around this unit.
• Firmly secure all hardware before use.
• Inspect hardware often and tighten as necessary.
• Do not use this item in the proximity of open flame or flammable/combustible chemicals.
• Keep this unit a safe distance from heat sources such as fire pits, patio heaters, and grills.
• Do not store flammable or combustible items inside this unit.
• Do not use harsh chemicals or abrasive materials to clean this unit.
• This product is for residential use only; institutional or commercial use will void this warranty.
SAFETY STATEMENTS & WARNINGS
