Sunnydaze Decor YUK-747 User manual

06/2023XG211 Page 1 / 3
  
ASide Panel 2
BSeat 1
CBackrest 1
DM6x50mm Bolt 4
EM6x55mm Bolt 4
FWasher 8
GNut 4
HHex Key 1
ISpanner 1
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
CAST IRON LATTICE PATIO BENCH
YUK-747
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.

Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
CHOKING HAZARD — This item contains small
parts that can be swallowed. Keep children and pets
away during assembly.
WARNING
615
pounds
279 kg
Weight Capacity
TIP: Always fully insert
the hex key inside the
designated notch on
the bolt head.
If the hex key is not fully inside the notch, the hex key
could slip out, causing damage to the bolt head. Repeated
hex key slipping will cause the notch to become rounded,
making it di󰀩cult or impossible to tighten the bolt with the
hex key.
NOTE: Over time and with use, the bolts may become loose. Save the included
tools for tightening loosened hardware.

06/2023XG211 Page 2 / 3
ASSEMBLY
Review all steps and understand assembly before beginning.
Do not fully tighten hardware until all components have been loosely assembled.
STEP 1
A: 2
B: 1
D: 4
F: 4
G: 4
STEP 2
C: 1
E: 4
F: 4
G: 4
Align one Side Panel (A) with Seat (B) and secure by hand-tightening two M6x50mm Bolts (D), two Washers
(F) and two nuts (D). Do not fully tighten hardware until the backrest is secured in the next step.
Repeat this step to secure the remaining side panel to the opposite side of the seat.
Align Backrest (C) with the top of the side panels and secure using four M6x55mm Bolts (E) and four
Washers (F).
Fully tighten all hardware.

06/2023XG211 Page 3 / 3
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,


SAFETY STATEMENTS & WARNINGS
• For residential use only. Not for commercial or industrial use.
• Ensure all fittings are tight before use. Periodically check fittings to ensure they remain tight.
• Only use this unit on a flat, level surface.
• Do not exceed the weight capacity of the furniture.
• Never stand or climb on the unit.
• Never allow children to use this product unsupervised.
• Keep furniture a safe distance from heat sources such as fire pits, patio heaters, and grills.
• Never use chemical cleaning products or polishes as doing so may damage the finish.
If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team directly through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.
Cleaning
DO NOT USE BLEACH DO NOT USE A PRESSURE WASHER
HAND-WASH ONLY
Mix warm water with mild detergent. Use a soft cloth to hand-wash the furniture. Thoroughly rinse away all
soap residue. To prevent water spotting, dry furniture with a soft, lint-free cloth.
Care & Maintenance
SAFE USE: For residential use only. Only use on a at, level surface.
INSPECT: Periodically check assembly points and tighten ttings as necessary.
COVER: When not in use, cover furniture with a breathable cover to help protect it from the harmful e󰀨ects
of sunlight, inclement weather, as well as dust build-up, and collecting debris.
WINTER CARE & STORAGE: During winter & freezing temperatures, move furniture to a cool, dry indoor
location.
SCRATCHES: The nish on this product is tough & durable but, even under normal use, some scratching is
inevitable. Scratches can be repaired with rust-resistant paint (not included).
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE APPLICATION OF CHEMICAL TREATMENTS, PROTECTIVE COATINGS, OR TOUCH-UP PAINT.