Sunnydaze Decor MERANTI STR-589 User manual

  
ATable Top 1
BLeg Panel 2
CLeg Support 1
Page 1 / 2
MERANTI WOOD
SQUARE BAR HEIGHT TABLE
STR-589
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.

Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
HELPFUL HINT
Do not fully tighten hardware until all components are assembled. If hardware is tightened too soon, mounting
holes may not align, and parts may not easily t together.
2-PERSON
ASSEMBLY
RECOMMENDED
NOTE: Save the hex key to use in the event hardware becomes
loose and needs to be tightened.
BRT-118
  
1JCBC M6 x 75mm Bolt
with Barrel Nut 4
2JCBC M6 x 55mm Bolt
with Barrel Nut 2
3Barrel Nut Driver 1
4Hex Key 1
WARNING
CHOKING HAZARD — This item contains
small parts that can be swallowed by children.
Keep children away during assembly.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
08/2020

75mm
75mm
A
B
C
55mm
75mm
55mm
75mm
B
Page 2 / 2BRT-118
ASSEMBLY
Read carefully and understand assembly before beginning.
Do not fully tighten hardware until all components have been loosely assembled.

WARNING:


General Use & Care
• Insert 2x Barrel Nut into the table
top. Use the Barrel Nut Driver to
align the barrel nut with the hole on
the outside of the table top.
• Attach Leg Panel (B) to the table
top by hand-tighten 2x 75mm Bolt;
ensuring the bolt threads into the
barrel nut.
STEP 1
A: 1
B: 1
1: 2
STEP 2
C: 1
2: 1
STEP 3
B: 1
1: 2
2: 1
• Insert 1x Barrel Nut into Leg
Support (C). Use the Barrel Nut
Driver to align the barrel nut with the
hole on the outside of the support.
• Attach the leg support to the bottom
of the leg panel by hand-tightening
1x 55mm Bolt, ensuring the bolt
threads into the barrel nut.
• Repeat Step 1 and Step 2 to affix
the second leg panel.
• Tighten all hardware using Hex Key
(4). Do not over-tighten, as doing
so may damage the wood.
SAFE USE: For residential use only. Only use on a at, level surface. Do not sit or stand on the table.
MOVING: Always lift furniture when moving it around, never drag it.
I N S P E CT: Periodically check bolts and tighten as necessary.
EXPOSURE: Over time, sunlight and weather elements may degrade and change the color of natural wood. Avoid
leaving wooden furniture in the rain or high-humidity climates as wood expands and contracts with moisture and humidity
changes. If this item is not used for extended periods, cover it with a breathable cover or store it indoors.
WINTER CARE & STORAGE: Protect this item from inclement weather, especially ice and snow. Move it to an indoor
location that is cool and dry. Covering while in storage is recommended to help prevent dust build-up.
CLEANING: Identify the direction of the woodgrain and wipe dust and debris using a soft, dry cloth. Surface mildew can
be washed away using a very mild solution of soap and water and a soft cloth; after drying, oil treatment is recommended.
MAINTENANCE:Left untreated, the wood will turn a silvery gray color. To maintain the appearance, apply a suitable
penetrating Wood, Teak or Linseed Oil (not included) twice a year. Bring furniture indoors and allow it to dry for at least
12 days before applying oil. Only apply oil to wooden surfaces. Use a soft cloth or soft brush and carefully apply oil as
directed by the wood oil manufacturer.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE APPLICATION OF CHEMICAL TREATMENTS OR PROTECTIVE COATINGS.
08/2020

Page 1 / 3BSC-080
MERANTI WOOD BAR HEIGHT CHAIRS
STR-572
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.

HELPFUL HINT
Do not fully tighten hardware until all components are assembled. If hardware is tightened too soon, mounting
holes may not align, and parts may not easily t together.
  
ABackrest 2
BSeat 2
C1 Right Side Panel 2
C2 Left Side Panel 2
DLeg Bar 4
NOTE: Save the hex key to use in the event hardware becomes
loose and needs to be tightened.
  
1JCBC M6 x 60mm Bolt
with Barrel Nut 20
2Barrel Nut Driver 1
3Hex Key 1
2-PERSON ASSEMBLY
RECOMMENDED
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
08/2020

Page 2 / 3BSC-080
ASSEMBLY
Read carefully and understand assembly before beginning.
Do not fully tighten bolts until all components have been loosely assembled.
A
B
D
D
C1 C2
60mm
60mm
60mm
60mm
60mm
60mm
60mm 60mm
60mm
60mm
• Insert 2x Barrel Nut into each Leg Bar (D). Use the
Barrel Nut Driver (2) to align the barrel nut with the hole
on the outside of the leg bar.
• Insert the leg bars into the notches at the bottom of the
Right Side Panel (C1) and Left Side Panel.
• Loosely fasten the components by hand-tightening 4x
60mm Bolt (1), ensuring the bolt threads into the barrel nut.
STEP 1
C1: 1
C2: 1
D: 2
1: 4
STEP 2
B: 1
1: 2
STEP 3
A: 1
1: 4
• Insert 2x Barrel Nut into the underside of the front of
Seat (B). Use the Barrel Nut Driver (2) to align the barrel
nut with the hole on the outside of the seat.
• Align the pegs on the seat with the notches on the inside
of the side panels.
• Secure the front of the seat by hand-tightening 2x 60mm
Bolt (1), ensuring the bolt threads into the barrel nut.
• Insert 2x Barrel Nut into the top of Backrest (A). Use the
Barrel Nut Driver (2) to align the barrel nut with the hole
on the outside of the backrest.
• Place the backrest between the side panels, ensuring
the end of the backrest with the barrel nuts is on top.
• Insert 2x Barrel Nut into the underside of the back of
Seat (B). Use the Barrel Nut Driver to align the barrel
nut with the hole on the outside of the seat.
• Loosely fasten the backrest by hand-tightening a
60mm Bolt (1) into each side of the top of the backrest,
ensuring the bolt threads into the barrel nut.
• Loosely fasten the seat by hand-tightening a 60mm Bolt
(1) into each side of the back of the seat, ensuring the
bolt threads into the barrel nut.
• Tighten all hardware using Hex Key (3). Do not over-
tighten, as doing so may damage the wood.
08/2020

WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

Page 1 / 3BSC-080

General Use & Care
SAFE USE: For residential use only. Only use on a at, level surface. Do not stand on the chair and do not
sit on the arms of the chair. Standing on a chair or rocking on the back of the chair may weaken the structure.
MOVING: Always lift furniture when moving it around, never drag it.
I N S P E C T: Periodically check bolts and tighten as necessary.
EXPOSURE: Over time, sunlight and weather elements may degrade and change the color of natural wood.
Avoid leaving wooden furniture in the rain or high-humidity climates as wood expands and contracts with
moisture and humidity changes. If this item is not used for extended periods, cover it with a breathable cover
or store it indoors.
WINTER CARE & STORAGE: Protect this item from inclement weather, especially ice and snow. Move it to
an indoor location that is cool and dry. Covering while in storage is recommended to help prevent dust build-up.
CLEANING: Identify the direction of the woodgrain and wipe dust and debris using a soft, dry cloth. Surface
mildew can be washed away using a very mild solution of soap and water and a soft cloth; after drying, oil
treatment is recommended.
MAINTENANCE:Left untreated, the wood will turn a silvery gray color. To maintain the appearance, apply a
suitable penetrating Wood, Teak or Linseed Oil (not included) twice a year. Bring furniture indoors and allow it
to dry for at least 12 days before applying oil. Only apply oil to wooden surfaces. Use a soft cloth or soft brush
and carefully apply oil as directed by the wood oil manufacturer.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE APPLICATION OF CHEMICAL TREATMENTS OR PROTECTIVE COATINGS.
08/2020