Sunnydaze Decor MERANTI STR-510 User manual

Page 1 / 2DVT-129
MERANTI WOOD DINING TABLE
STR-510
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.

  
ATable Top 1
BLeg 2
CLeg Bar 2
DUmbrella Support 1
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
HELPFUL HINT
Do not fully tighten hardware until all components are assembled. If hardware is tightened too soon, mounting
holes may not align, and parts may not easily t together.
WARNING
CHOKING HAZARD — This item contains small parts that can
be swallowed by children. Keep children away during assembly.
  
1JCBC M6 x 70mm Bolt
with Barrel Nut 8
2JCBC M6 x 60mm Bolt 4
3Washer 4
4Barrel Nut Driver 1
5Hex Key 1
2-PERSON
ASSEMBLY
RECOMMENDED
NOTE: Save the hex key to use in the event hardware becomes loose and
needs to be tightened.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
08/2020

Page 2 / 2
ASSEMBLY

WARNING:


General Use & Care
SAFE USE: For residential use only. Only use on a at, level surface. Do not sit or stand on the table.
MOVING: Always lift furniture when moving it around, never drag it.
I N S P E C T: Periodically check bolts and tighten as necessary.
EXPOSURE: Over time, sunlight and weather elements may degrade and change the color of natural wood. Avoid
leaving wooden furniture in the rain or high-humidity climates as wood expands and contracts with moisture and humidity
changes. If this item is not used for extended periods, cover it with a breathable cover or store it indoors.
WINTER CARE & STORAGE: Protect this item from inclement weather, especially ice and snow. Move it to an indoor
location that is cool and dry. Covering while in storage is recommended to help prevent dust build-up.
CLEANING: Identify the direction of the woodgrain and wipe dust and debris using a soft, dry cloth. Surface mildew can
be washed away using a very mild solution of soap and water and a soft cloth; after drying, oil treatment is recommended.
MAINTENANCE:Left untreated, the wood will turn a silvery gray color. To maintain the appearance, apply a suitable
penetrating Wood, Teak or Linseed Oil (not included) twice a year. Bring furniture indoors and allow it to dry for at least
12 days before applying oil. Only apply oil to wooden surfaces. Use a soft cloth or soft brush and carefully apply oil as
directed by the wood oil manufacturer.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE APPLICATION OF CHEMICAL TREATMENTS OR PROTECTIVE COATINGS.
• Affix Umbrella Support (D) between 2x Leg Bar (C).
• Insert 4x Barrel Nut into each Leg Bar (C). Use the Barrel Nut
Driver to align the barrel nut with the hole on the side of leg bar.
• Affix the leg bars to Leg (B) and fasten by hand-tightening
4x 70mm Bolt (1) through each leg; ensure the bolt
threads into the barrel nut.
• Place Table Top (A) upside-down on a soft, clean surface and
align the table legs with the table top.
• Secure pieces by hand-tightening 4x Washer (3) and 4x
60mm Bolt (2).
• Tighten all hardware using Hex Key (5). Do not over-
tighten, as doing so may damage the wood.
DVT-129
STEP 1 B: 2 D: 1C: 2 1: 8 STEP 2 A: 1 2: 4
Read carefully and understand assembly before beginning.
Do not fully tighten hardware until all components have been loosely assembled.
08/2020

Page 1 / 2JCA-226
MERANTI WOOD ARM CHAIRS
STR-435
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.

Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
HELPFUL HINT
Do not fully tighten hardware until all components are assembled. If hardware is tightened too soon, mounting
holes may not align, and parts may not easily t together.
2-PERSON
ASSEMBLY
RECOMMENDED
  
ABackrest 2
BSeat 2
C1 Right Side Panel 2
C2 Left Side Panel 2
DLeg Bar 4
NOTE: Save the hex key to use in the event hardware
becomes loose and needs to be tightened.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
08/2020
  
1JCBC M6 x 60mm Bolt 4
2JCBC M6 x 40mm Bolt 4
3JCBC W70mm Screw 4
4JCBC W50mm Screw 8
5Hex Key 1

Page 2 / 2JCA-226
ASSEMBLY
Read carefully and understand assembly before beginning.
Do not fully tighten hardware until all components have been loosely assembled.

WARNING:


General Use & Care
SAFE USE: For residential use only. Only use on a at, level surface. Do not stand on the chair and do not sit on the
arms of the chair. Standing on a chair or rocking on the back of the chair may weaken the structure.
MOVING: Always lift furniture when moving it around, never drag it.
I N S P E C T: Periodically check bolts and tighten as necessary.
EXPOSURE: Over time, sunlight and weather elements may degrade and change the color of natural wood. Avoid
leaving wooden furniture in the rain or high-humidity climates as wood expands and contracts with moisture and humidity
changes. If this item is not used for extended periods, cover it with a breathable cover or store it indoors.
WINTER CARE & STORAGE: Protect this item from inclement weather, especially ice and snow. Move it to an indoor
location that is cool and dry. Covering while in storage is recommended to help prevent dust build-up.
CLEANING: Identify the direction of the woodgrain and wipe dust and debris using a soft, dry cloth. Surface mildew can
be washed away using a very mild solution of soap and water and a soft cloth; after drying, oil treatment is recommended.
MAINTENANCE:Left untreated, the wood will turn a silvery gray color. To maintain the appearance, apply a suitable
penetrating Wood, Teak or Linseed Oil (not included) twice a year. Bring furniture indoors and allow it to dry for at least
12 days before applying oil. Only apply oil to wooden surfaces. Use a soft cloth or soft brush and carefully apply oil as
directed by the wood oil manufacturer.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE APPLICATION OF CHEMICAL TREATMENTS OR PROTECTIVE COATINGS.
• Secure 2x Leg Bar (D) to Right
Side Panel (C1) by hand-tightening
2x W50mm Screw (4).
• Secure Left Side Panel (C2) to
the leg bars by hand-tightening 2x
W50mm Screw (4).
STEP 1
C: 2
D: 2
4: 4
STEP 2
B: 1
2: 2
STEP 3
A: 1
1: 2
3: 2
Ensure side panel
support bars face inward
• Align Seat (B) with the holes above
the support bars of the side panels.
• Insert M6 x 40mm Bolt (2) through
the front leg of each side panel and
hand-tighten.
• Align Backrest (A) with the side
panels and insert M6 x 60mm Bolt
(1) through each side panel armrest
and hand-tighten.
• Insert W70mm Screw (3) through
the back leg of each side panels
and hand-tighten.
Tighten all bolts using Hex Key (5).
08/2020