Sunnydaze Decor Meranti FRN-909 User manual

Page 1 / 389598
  
FSeat 2
GBackrest 2
HSupport Beam 2
1JCBC M6x60 Bolt 4
2JCBC M6x40 Bolt 24
3Barrel Nut 4
4Hex Key 1
5Barrel Nut Driver 1
MERANTI WOOD
3-PIECE CONVERSATION SET
FRN-909
Read this manual carefully before using this product. Save this manual for future reference.

CHOKING HAZARD —
This item contains small
parts that can be swallowed
by children. Keep children
away during assembly.
WARNING
  
ATabletop 1
BTable Shelf 1
CTable Leg 4
DRight Arm 2
ELeft Arm 2
Ensure all parts are
accounted for before
disposing of packaging.
07/2020
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:

ASSEMBLY
Read carefully and understand assembly before beginning.
Do not fully tighten bolts until all components have been loosely assembled.
Page 2 / 389598
STEP 1
A: 1
B: 1
C: 4
2: 8
Do not fully tighten bolts until after Step 4 is complete.
STEP 2
E: 1
F: 1
G: 1
2: 4
STEP 3
H: 1
1: 1
3: 2
STEP 4
D: 1
1: 1
2: 4
• Fasten Leg (C) to Tabletop (A) and Table Shelf (B) by
hand-tightening 2x M6x40 Bolt (2).
• Repeat until all legs have been installed.
• Tighten all bolts using Hex Key (4).
• Fasten Left Arm (E) to Seat (F) by hand-tightening 2x
M6x40 Bolt (2).
• Fasten Backrest (G) to Left Arm (E) by hand-tightening
2x M6x40 Bolt (2).
Do not fully tighten bolts until after Step 4 is complete.
• Insert 2x Barrel Nut (3) into Support Beam (H). Use the
Barrel Nut Driver to align the barrel nut with the hole on
the side of the support beam.
• Insert the peg on Support Beam (H) into the left arm.
• Fasten the components by hand-tightening 1x M6x60
Bolt (1) through the arm and into the barrel nut inside
the support beam.
• Align Right Arm (D) with assembled components,
ensuring the peg in the support beam is correctly
positioned within the arm.
• Secure the arm by hand-tightening 1x M6x60 Bolt (1)
and 4x M6x40 Bolt (2), as shown.
• Tighten all bolts from Step 2, 3, and 4 using Hex Key (4).
• Repeat steps 2, 3, and 4 to assemble the second chair.
07/2020

Page 3 / 389598
Care & Maintenance
SAFE USE: For residential use only. Only use on a at, level surface. Do not stand on the chairs. Do not sit
or stand on the table.
INSPECT: Periodically check assembly points and tighten ttings as necessary.
CLEANING: Identify the direction of the woodgrain. Following the direction of the woodgrain, wipe surfaces
with a soft, dry cloth. Do not use harsh chemicals or abrasive materials or a pressure washer to clean.
COVER: When not in use, cover furniture with a breathable cover to help protect it from the harmful e󰀨ects
of sunlight, inclement weather, dust build-up, and collecting debris.
WINTER CARE & STORAGE: Protect this item from inclement weather, especially ice and snow. Move to
a cool, dry indoor location. Covering while in storage is recommended to help prevent dust build-up.
MAINTENANCE:If left untreated, the wood may weather. A suitable wood stain or oil may need to be
applied yearly.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE USE OF CHEMICAL TREATMENTS OR PROTECTIVE COATINGS.
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

07/2020
• Do not exceed the weight capacity of the furniture.
• Do not sit, stand, or climb on the table.
• Do not stand on the chairs.
• Inspect hardware often and tighten loose hardware before use.
• Do not put hot items on or near furniture.
• Do not allow children to use this product without adult supervision.
• Do not use harsh chemicals or abrasive materials to clean the furniture.
• Do not use a pressure washer to clean the furniture.
SAFETY STATEMENTS & WARNINGS
