Sunricher 1009EA User manual

UNIVERSAL All in One RGBW RFWIFI
Receiver 8A 4CH
Wiring diagram
1) Receiver Connection Diagram for Single Unit
2) Receiver Connection Diagram for Multiple Units
ISO9001：2008
Feature
Work with different sender
Work with WIFI transmitter
Control RGBW, RGB, CC-CW, Single color LED lighting.
Parameter
Input Voltage
Current
Output
Remarks
12-36VDC
4x8A
4x(96-288)W
Constant voltage
Product Size Operation
Learning (matching)
a. Do wiring according to connection diagram
b. Wake up the remote control by touching ON/OFF button.
c. Press learning button on receiver.
d. Touch any zone button on remote control.
e. Then touch color wheel.
f. Connected LED light will blink to confirm zone designation.
g. Press at learning button on receiver over 5 seconds until LED light flash, then delete the learned ID.
Note 1: To choose a master from slaves by jumper for each zone.
Short circuit for master.
Open circuit for slave.
Each zone only can set one master controller. After a period of time, the master will do synchronization
operation to keep the same color or modeof all slaves in one zone.
Note 2: Each remote control 8 zones (areas) receivers, each area can be learned as many receivers as we
can.
Each receiver maximally can be controlled by 8 different remote controllers.
2
Power Supply
12-36VDC
110V-230VAC
SR-1009EAWi
Reset
Swit ch
Lear ning
Swit ch
W
RGB/W or CDWLED strip
178.0
Power Supply
12-36VDC
110V-230VAC
SR-1009EAWi
Reset
Swit ch
Lear ning
Swit ch
W
RGB/W or CDWLED strip
SR-1009EAWi
Reset
Swit ch
Lear ning
Swit ch
W
RGB/W or CDWLED strip
SR-1009EAWi
Reset
Swit ch
Lear ning
Swit ch
W
RGB/W or CDWLED strip
NL
NL
12-36VDC
12-36VDC
12-36VDC
12-36V DC
46.1
21.0

Safety& Warnings
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6) Please ensure that the cable is secured tightly in the connector
7) For update information please consult your supplier.
WarrantyAgreement
1) We provide lifelong technical assistance with this product:
2-year warranty. We print date on every products. Thewarranty is for free repair or replacement and covers
manufacturing f aults only .
For faults bey ond the 5-y ear warranty we reserve the right to charge for time and parts.
2) Limited Warrenty
Any defects caused by wrong operation.
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of chips.
Any damages due to transportation, v ibration etc. af ter purchase.
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near harmf ul
chemicals.
Product has been updated
3) Repair or replacement as provided under this warranty is the exclusive remedy tothe customer.