SUNSCAN SR868C8 User manual

SUNSCAN™ SR868C8
Quick Setup Guide
Please note these are basic keystroke details to setting up your system. For in-depth
information, please consult your manual.
Setting the Timed Heating
Press SET 5 times through password.
DT 0 appears
Press +
DT F appears
Press +
tHet appears.
Press SET
tH1o appears (Heating Period 1 On) 04:00 default
Press SET - Hours will flash adjust
on time hours using + or –
Press SET - Minutes will flash Adjust
on time minutes using +or –
Press SET - Temperature will flash
Adjust Temperature using +or –Press
SET
Press +
tH1F appears (Heating Period 1 Off) 05:00 default
Press SET - Hours will flash adjust
off time hours using + or –
Press SET - Minutes will flash Adjust
off time minutes using +or –
Press SET - Temperature will flash
Adjust Temperature using +or –Default if 3 degrees above on temp
Press SET
Press +
tH2o appears (Heating Period 2 On) 10:00 default
Use Red sub routine as above, if you need to make changes.
Press +
tH2F appears (Heating Period 2 Off) 10:00 default
Use Red sub routine as above, if you need to make changes.

Press +
tH3o appears (Heating Period 3 On) 17:00 default
Use Red sub routine as above, if you need to make changes.
Press +
tH3F appears (Heating Period 3 Off) 22:00 default Use Red sub routine as above, if you
need to make changes.
Press ESC. Press ESC.
Setting the time
Press Clock the hour indicator begins to flash
Press + or –until the desired hour is set.
Press Clock the minute indicator begins to flash
Press + or –until the desired minute is set. Press
Clock the day indicator begins to flash Press + or
–until the desired day is set.
Press Clock to complete the proce