Teknion HABCCMML Operating and maintenance instructions

MidCover - Metal (HABCCMML), End Cover - Metal (HABCCEML) Part and Product Identification
For Customer Support please contact
[email protected]
A1 - Mid Cover with Cable Cutout
for Power Pole
(A16-3089-X) x Qty varies per
configuration
OR
For Customer Support please contact
[email protected]
B1 - End Cover with Cable Cutout
(A16-3033-X)xQty varies as
per configuration
OR
A2 - Mid Cover for Power Pole
(A16-3214-X)x Qty varies per
configuration
OR
A3 - Mid Cover with Cable Cutout
(A16-3034-X)x Qty varies per
configuration
OR
A4 - Mid Cover (A16-3213-X) xQty
varies per configuration
B2 - End Cover (A16-3212-X)xQty
varies as per configuration
A3
B
NOTE: Mid Cover with Cable
Cutout shown as an example.
For Cable Channel installation
procedures, please refer to guide
HABL_203a or 203b
For Customer Support please contact
[email protected]
Section:
Description: Page No:
Date:
Rev. No: 1
MID & END COVER - METAL
SCREENS & GABLES
May 2017 1 of 3
HABL_203c
Installation Guides
height-adjustable bench
A - End Cover, Metal (HABCCEML) x1B - Mid Cover, Metal (HABCCMML) x1

STEP 2: Bring End Cover and Support Bracket together, and place them on Frame Stretcher
Bar.
STEP 1: Slide Cable Channel Support Bracket into End Cover, making sure holes align.
STEP 3: Secure End Cover in place with Support Bracket Screws.
Screws -
Support Bracket
NOTE: End Cover with Cable
Cutout shown as an example.
For Cable Channel installation
procedures, please refer to guide
HABL_203a or
203b
B1
Stretcher Bar-
Part of Frame
Support Bracket-
Ships with Cable
Channel
B1
NOTE: End Cover without
Cable Cutout will rest on top of
Stretcher Bar. Does not need to
be secured in place.
Section:
Description: Page No:
Date:
SLIDE SUPPORT BRACKET INTO END COVER
PLACE END COVER & BRACKET ON FRAME BAR
SECURE END COVER IN PLACE
HABL_203c
2 of 3
May 2017
MID & END COVER - METAL
SCREENS & GABLES
Installation Guides
height-adjustable bench

STEP 4: Place Metal Mid Cover on top of Stretcher Bars and Cable Channel Support Brackets. Use Hex Screws provided with Support Brackets to secure Metal Mid Cover in place, as illustrated.
A3
A3
Support Bracket-
Cable Channel
Support Bracket
Screws
Stretcher Bar-
Frame
NOTE: Mid Cover with Cable
Cutout shown as an example.
For Cable Channel installation
please refer to guide
procedures,
HABL_203
a
or 203b
NOTE: Mid Cover without Cable
Cutout will rest on top of Stretcher Bar.
Does not need to be secured in place.
Installation Guides
height-adjustable bench
Section:
Description: Page No:
Date:
INSTALL METAL MID COVER
May 2017 3 of 3
HABL_203c
MID & END COVER - METAL
SCREENS & GABLES