SUNSET CAP1007S-KIT User manual

Instruction Manual
Filter and Check Valve Kit
for SoClean 2 CPAP Cleaning Device
CAP1007S-KIT
Manufactured for
Sunset Healthcare Solutions
180 N Michigan Ave Ste 2000
Chicago, IL 60601
IFU-00038 Rev 2.02
2021-02-18
This product is not made, authorized,
or endorsed by SoClean, Inc., but
is warranted by Sunset Healthcare
Solutions, Inc. to t and work in the
SoClean 2 CPAP cleaning device.

Replace filter
Remove old filter by
pulling up from the filter
holster. Dispose of old
filter in household trash.
Completely remove plastic
tape from new filter and
wipe off any remaining
charcoal residue.
Replace the filter and check valve every six months, when
the SoClean prompt shows on the display.
Place new filter into holster and press down until it is
fully seated.
3
1
2
You MUST use the filter to prevent harmful unconverted ozone from
entering air.
!
Read instructions before use

↑
C
P
A
P
↑
Replace check valve
↑
C
P
A
P
↑
↑
C
P
A
P
↑
MANUAL
!
It is important
to ensure the
↑CPAP↑ arrows
on the check
valve are
pointed toward
the CPAP
machine.
Pull thin black injection tubes off of old check valve.
Reset the replacement
timer by holding down
the manual and hourglass
buttons together until the
SoClean shows a smiling face.
Put new check valve in place by ensuring firm connections.
1
3
2