Sunstar Digi SX-8 User manual

Mini Shutter Speaker
INSTRUCTIONS
This Mini Bluetooth shutter speaker only 26.8*26.8*26.6, small size, but
powerful multi-function, support Bluetooth Camera, Bluetooth music
playing, Bluetooth phone call, Bluetooth anti-lost feature, etc., with
fashion design, can hang as a cell phone ornaments, etc., a good
choose as for the promotional season.
Features
•Bluetooth Remote Camera (2)
•APP: NO
•For IOS (iphone4S/5/5S/6/6+ or up) & Android（4.3 or up）
•Bluetooth Speaker Phone Option (Hands-free call) (5)
•Anti-Loss Feature
•Bluetooth Speaker (8)
•Very Small Size, 26.8*26.8*26.6mm
•Rechargeable Battery
Easy operation
1. Press button: Play/Pause/Answer Calls
●Press and hold the Power button to power On/Off
●Press the button to pause when music is playing, press again to replay
●Press the button to answer incoming calls when the device is paired
with a phone, press again to end call
2. Remote Camera Shortcut
●Open the device’s “Camera”, press the shortcut (2) to take pictures
while music is playing
3. Bluetooth indicator light:
●Fast flashing green LED light shows that the speaker is Bluetooth
searching and pairing mode
●Slow flashing green LED light indicates that the phone was
successfully paired
4. Charging indicator Light
●Steady red LED light while the device is charging
●The indicator light (4) extinguished when fully charged
5. Microphone
6. Sling hole
7. Micro USB (power input)
8. Speaker

Pairing:
●Press and hold the power button until you hear the start-up chime. The
green LED light will be flashing quickly.
●Switch on your Bluetooth device and wait until JTL-6 shows up on your
screen. When JTL-6 appears on your device, select and pair with the
speaker.
●When the pairing is completed you will hear a message and the green
LED light will flash less frequently
●To turn off the speaker, press and hold the Power button (1)
Charging
You should fully charge the speaker prior to first use. Plug the charging
cable into the micro USB port (7) and then connect the charging cable to
the USB port of your PC or other compatible power source. The red LED
light (4) will flash during charging and remain solid when fully charged.
Power On\Off
Power on: Press the power button and hold until a beeping sound is
heard and the green light flashes quickly.
To turn off: press the power button (1) and hold, “Power off” will be heard
and the green light (3) will go off.
Please Note: It is strongly recommended that you turn off the speaker
while not in use.
Bluetooth Pairing
Please check to make sure the device to which you are pairing has
Bluetooth capabilities. This information should be included in your phone
or device’s instructions or packaging.
1. Make sure that the speaker is turned off.
2. Place the speaker and the device in proximity so that both
devices are in view.
3. Press and hold the power button until speaker power is on. A
green LED light (3) will flash quickly.
4. To active the Bluetooth mode and functions on your phone or
device, see the instructions for that device.
5. Set the phone or device to search for Bluetooth devices and
select the speaker.
6. When the pairing is complete, the green LED light (3) will flash
more slowly. The speaker is now ready for listening to music or
answering calls.
Note: Some mobile phones or other devices may pair automatically when
re-started.
Bluetooth Camera

1. Open the device’s “Camera”, press the shortcut (2) to take pictures
while music is playing.
2. Turn off the bluetooth, you can share pictures with others by send
email or message.
Note: Make sure Bluetooth is connected the device.
Anti-Loss
When device connected the speaker, once the distance up to 10-
15meters, speaker will start to alarm with “Dududu,Dududu”, until the two
devices close again, it will stop and connect again automatically.
Answer / Reject / End a call
During a call, the ring is heard through the speaker when paired. The
microphone (5) is a small hole in the speaker on the button side.
1. Press the power button (1) for about 1 second to answer the call.
2. You may also accept or decline a call using your phone’s
functions.
3. To end a call, press the power button (1) during the call. You
may also end the call using your phone’s functions.
Play / Pause
In the process of playing music, press the power button (1) to pause/play
the music.
Specifications
•Rated Power PO=2W
•Frequency Response 180HZ-16KHZ
•Distortion Factor THD<1%
•Signal to Noise Ratio: S/N≥90DB
•Separation ≥55DB
•Speaker 23mm;4Ω2W
•Battery 3.7V/180mAh polymer Li battery
Precautions
•Please only use the computer USB or the DC 5V power
matching the Micro USB interface to charge.
•Please keep and use in normal environments. Exposure to
extreme elements such as fire, water, or other extreme elements
may damage the unit. Do not handle with wet hands.
•Keep debris or other items from blocking the speakers or from
entering any of the ports.
•Do not attempt to open or take apart this speaker. The speaker
will be damaged during that process.
•If the speaker quality seems lessened, or a slight popping noise
is heard, it may be caused by a low battery. Please recharge the
speaker.

TROUBLESHOOTING
No Sound
•Make sure that the music player is working and that the speaker
is charged.
•Make sure the Bluetooth is paired with the correct speaker.
Not charging
•Check to make sure that you are using the correct cable and that
it is fully plugged into both the device and the USB port that you
are charging from. Also check to make sure the PC or other USB
charger is turned on.

FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not
expressly approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Caution:
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
