Sunter Lighting GT3340-1 User manual

Natura! Daylight
FSL
ro]
Оиа!1х/10х
Magnlf!cat!٥n
roj
fi Tlř١
Model #:NDVM-13-3340
Item/Art. 738٥Sl
Lighting Natural Daylight Mirror features Full-Spectrum Certified™ lighting. Full-Spect؛um Certified enures
that
yourself with true-tolife colorthat is glare-free,
fhe table top mirror features optical grade mirrors
that are
Sunter
you see
a٥nne:::gy efficient Full Spectrum Certified™ compact
fluorescent bulb that will let you ؛ ts٥e٢st ؛؛ ٢hete:rra٥r :;¡؛ iD ؛ fN
aetur h٥T؟
. see your face in a wliole new liglit
the optical grade glass mirrors offers both a IX and
lox magnification by simply rotating the mirror up
to 360ي for the
best viewing angle.
Should you have any questions about this products performance
or assembly, do not return the lamp to the store.
Please call US toll free at 1-888-525-7969 or email:
customerserviceigblackstoneltd.cgrn
CAUTioN : Always unplug the lamp from the AC wall outlet
before installing or changing the bulb. To avoid the
risk of electrical shock or electrocution, do not submerge
the lamp or expose the lamp to water.
N٥TE: Max 120ν 13W bare-spiral self ballast compact
fluorescent bulb. This.device is not intended for use
with
e^ergen؛yeXtfiXtureSOr-ernergencylighting. This device
is no؛ intend^Or use where exposed to the
is notintendedfor u؛e withdimnier Controls. Caution
- risk of electric shock - do not use where directly
exposed to water. BULB RECYCLING INFORMATioN: Compact
fluorescent bulbs contain mercury. Manage in
accordance v^ith local disposal laws. For more information,
please. اً
CARE AND MAINTENANCE-. The table top mirror can be
cleaned with a household window cleaner. To avoid the
risk of
eeCtrical shOck or electrocution be sure to unplug
the mirror from the AC outlet before cleaning. Do not
submerge any
part ofthis lighting product in water.
At any time during use or storage, do not kink, knot
or pinch the cord. Do not allow th؛ cord toporne into contact
with
beated surfaces atanytime. dO not submerge the cord
or expose the cord to wet ^nd^tlo^n ؟ ؛ hen .ท0 ؛1 ท^นรร ؛^6
eOtlre fixture may be Stored by carefully coiling the
cord, using аррг٥٢г!а؛е۴саге not to kink, knot or p؛nch ؛١ cor؛g
magnifying mirrors, it should not be placed for use
or storage in a location which receives
Because the vanity mirror uses
direct sunlight.
TRBUBliSHDDTING GUIDE
Solution
Possioie Cause
PfoUlem
Eollow the stejjs Uelow In the Bulb Installation anu
Renlacementto onen the mittot case. BanU-lighten the
huih bv tuning the hase ol the hulb clockwise. Do not
attemni to tighten the hulhhvgtinolng the SDital glass
tubes as the„ mag bteak.
Push the fl Cnlug full„ Into the outleL
Contact customer serulce at
pi,gjnWg^^[email protected] or
888-525-7969 to reuuest a replacement hulh.
Bulb Is not full„ tighieneu In the socket
light will not Illuminate
Plug Is not full„ Inserteil Into outleL
Bulh isinonerahle.

BULB اNSTALLATها N AND REPLACEMENT
CAUT!٥N: To reduce the risk of electric shock, this
furnishing has a polarized plug (one blade is wider
than
the other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the
outlet,
reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper outlet.
Do not
change the plug in any way.
Always unplug the lighted vanity mirror from the AC
wall outlet before Installing or changing the bulb.
1. Using a#l Phillips head screwdriver (6 - not included),
remove the screws (5) located at each side of
the mirror case by turning counter-clockwise.
2. Remove the mirror case cover (4) from the vanity
mirror head (3) and set aside. Use care wlien
removing the mirror case from the lamp so as not to
break the glass mirrors. Do not apply excessive
pressure against the mirror surface or it may break.
3. Remove or install the bulb (2) in the bulb socket
(1).
4. Reinstall the mirror case cover (4) onto the vanity
mirror head (3). Pay attention to the position of the
screw holes in the mirror case and be sure to align
them so that the screws can be reinstalled.
5. Reinstall the screws (5) into the mirror case on
each side by turning clockwise with a#l Phillips head
screwdriver. Do not overtighten.
6. Plug the lamp into tlie AC outlet.
7. Be sure to dispose of the Compact Fluorescent bulb
according to local disposal laws. For more
information, please visit www.lamprecvcle.org.

IMPORTANT SAFETY INSTRUCTIONS
This اighted vanity m!r٢٥r !s des!gned for Househo!d
/ Res!dent!a! use ٥n!y.
When using any e!ectr!ca! furn^shاng bas!c precaut!٥ns
sh٥u!d be fo!!owed including the following:
Read all Instructions before using this lighted vanity
mirror.
Any servicing to the lighted vanity mirror should be
performed by an authorized service representative or qualified
electrician.
DANGER-
To reduce the risk of electrical shock:
1. Always unplug the lighted vanity mirror from the
electrical outlet before cleaning.
WARNING-
To reduce the risk of burns, fire, electrical shock
or injury to persons:
1. Unplug from electrical outlet before putting on
or taking off parts.
2. Close supervision Is necessary when the lighted
vanity mirror is used by or near children, invalids
or disabled
persons.
3. Use the lighted vanity mirror only for its Intended
use as described in these instructions. Do not use
attachments
not recommended by the manufacturer.
4. Never operate the lighted vanity mirror if it has
a damaged cord or plug. If It is not working properly,
if it has been
dropped or damaged or dropped into water. Return the
furnishing to a service center for examination or repair.
5. Keep the cord away from heated surfaces.
Never operate the lighted vanity mirror with ttie air
openings blocked. Keep the air openings free of lint, hair, dust
and the like.
7. Never drop or insert any object into any opening.
8. Do not use outdoors.
Do not operate where aerosol (spray) products are being
used or where oxygen is being administered.
10. To disconnect, turn all controls to the OFF position,
then remove plug from outlet.
6.
9.
For househo!d and !ndoor use
SAVE THESE !NSTRUCT!٥NS
This device complies with part 18 of FCC Rules
This product may cause interference to radio equipment
and should not be installed near maritime safety
communications equipment, ships at sea or other critical
navigation or communications equipment operating between
045-so MHz.
©2013 Blackstone International, ITD., Sunter Lighting™
and FSl Certified™ are registered trademarks of Blackstone
International, LTD. All other brands and logos are
trademarks or registered trademarks oftheir respective
Specifications are subject to change without notice.
Manufacturer: Zhongshan Grand Enterprise Company Limited
Address: No.2 Yihui North Road, Zone B, Maohui Industry,
Henglan Town, Zhongshan city, Guangdong, China 528478
owners.
Model: GT3340-1
Rated: 120V AC 60Hz 0.2Α
Date code; 06/15/2013
3